This one takes the cake!
About 20 years ago, I was driving the loop that goes past the local high school. The "back way, out of town.
Out of the corner of my eye, I see a roll off dumpster unit in the student parking area with what looks like shop table legs sticking out the top.
I pulled in for a closer look. (summer time, evening, not too many folks about)
Sure enough, it's a nice 5 foot, strip maple topped shop table turned upside down in the bin!
But get this, there is a horse and a half electric motor and motor starter switch attached. And when I tried to pull the table out for a better look, low and behold there is a "Spinning lathe" attached!
Whoa!
I had a few tools in a box in my car, so I grabbed it and jumped right in! First, off came the electric motor, then the lathe came off the other side. Those went into the trunk of the car. Then the table with legs it's self was carefully let down the side of the roll off and went onto the car roof. Tied down with ropes!
That spinning lathe and table are mighty nice in the shop. The lathe is General Purpose multi speed arbor, and the table has lots of room remaining. I even fitted a wood working vise!
Dumpster diving! I did feel sort of silly climbing in and out with the "goods" in my sweaty hands. Summer time, remember?