Good morning!!!!

[mpham]

Interesting lamp, Phil. What's it called?

Not sure. Something she picked up at Home Depot off the shelf. LED strip so if it breaks it's toast!

 

[buckeyefarmer]

was going to sharpen the blades on the mower, got it up on the lift, then couldn't find the socket for the blade bolt. I bought one just for it to use in the impact. searched for over an hour. Then thought I'd change the oil, didn't have a spare filter. I guess I already used the one I thought i had.
But I did get the mowing all done.
But while mowing, had a black poodle dog show up. Has a tag with a phone number. Guy was in TX, said someone about 2 roads over from me was watching it, and it ran off yesterday. So they came and got it. Nice dog. It ate the cat food we had out for snagglepuss.

I woke up last night at 2 am for bathroom break and couldn't get back to sleep. At 4 I came downstairs and did some computer stuff till about 5 or 6 or so, and then fell asleep in the lazy boy, woke up before 8.

wife picked some green beans.

 

[scott_vt]

Good Afternoon,
Vt, got a few quality hours out in the shop. Worked on milling up the stock for the rear rocker legs and band sawed out the profile before the lower back started to bark at me. Standing on the concrete for 5 hours will do it !

Hope to get some more accomplished tomorrow!

Time to make dinner, my neighbor stopped by and dropped off some goodies !

Have a good evening!

 

[daugen]

Frits, hope your mower is ok. That sure must have made a bang.

switched over to my portable hotspot with T Mobile and got most of my speed back.
Then tried Verizon again, no joy. Still like 1.6 download. T Mobile hotspot is 66/65, plenty fast though
not like 300/300 with FIOS.

might go out when sun goes down and wash the car. Very nice day today

 

[Popgadget]

I’m late to the party. This just popped up on my feed of topics. Is there a thread talking about his boiler setup? Is he already done and all is well?

I was sitting down for a quick late lunch. I broke a blade off my Ventrac and can’t find it. Getting ready to take my metal
Detector out there and see if I get lucky

I’m late to the party. This just popped up on my feed of topics. Is there a thread talking about his boiler setup? Is he already done and all is well?

Not much talk, but pictures as it progressed. Here’s what it looks like now.

Boiler and loops are all filled and deaerated , circulator and zone valves tested, boiler converted to propane, but hasn’t been fired up yet.

 

[daugen]

Popgadget, what is clear tank on bottom with white beads?

 

[Popgadget]

Popgadget, what is clear tank on bottom with white beads?

Acid neutralizer for the condensate drain

 

[Looking4new]

BEF, I miss read your post and had to read it twice. First time I thought it said that you ate the cats food. OOPS my bad. Very little difference between "IT and I"

scott, have you got floor space for a couple of horse stall mats? They might save your back from standing on the concrete.

 

[Thomas]

I'm sure my doc will not like my cholesterol numbers this visit too!
Once or twice a summer is needed though!

Yup.

 

[buckeyefarmer]

BEF, I miss read your post and had to read it twice. First time I thought it said that you ate the cats food. OOPS my bad. Very little difference between "IT and I"

scott, have you got floor space for a couple of horse stall mats? They might save your back from standing on the concrete.

I just feed the inside cats their canned food. I almost upchuck feeding them that stinky stuff.
The visiting pup ate snagglepuss’s dry food outside. Poor pup was Hungry and scared. He hopped up on the mower with me, so I ended up walking to the porch with him and waiting for his ride. Cute dog, but he picked up some burrs in that twisty hair.
Did another search for the missing 30mm socket. Guess I’ll buy another.
I even looked under the back of the barn shelving, like when my 300ft tape decided to hide.