TG1860 snowblower

[psk125]

Have the quick-hitch and blower, along with the manual for the blower. Have found some diagrams (thank you Messick's and Coleman Equipment) that show the arrangement of the TG2739A quick hitch and can guess as to how it has to go under the tractor. There do not seem to be any manuals or diagrams showing how the manual lifting arm for the snowblower attaches to the blower, quick hitch or tractor however. No pertinent Youtube videos either. Can someone please explain or post a photo or drawing of this for me? Or tell me where to look? The lack of support from Kubota on this is quite frustrating. It's like they want it kept a secret.

 

[Richard001]

Have the quick-hitch and blower, along with the manual for the blower. Have found some diagrams (thank you Messick's and Coleman Equipment) that show the arrangement of the TG2739A quick hitch and can guess as to how it has to go under the tractor. There do not seem to be any manuals or diagrams showing how the manual lifting arm for the snowblower attaches to the blower, quick hitch or tractor however. No pertinent Youtube videos either. Can someone please explain or post a photo or drawing of this for me? Or tell me where to look? The lack of support from Kubota on this is quite frustrating. It's like they want it kept a secret.

You might look here for help:

TG1860 with TG2746 Snowblower

I purchased a used TG1860 and it came with a TG2746 snowblower and what the dealer called a quick attach. The model number on the quick attach is a bit warn and hard to read, but looks like TG27300. I have the Owner's manual and Workshop manual for the tractor, and the Parts manual for the...

www.tractorbynet.com

 

[psk125]

You might look here for help:

TG1860 with TG2746 Snowblower

I purchased a used TG1860 and it came with a TG2746 snowblower and what the dealer called a quick attach. The model number on the quick attach is a bit warn and hard to read, but looks like TG27300. I have the Owner's manual and Workshop manual for the tractor, and the Parts manual for the...

www.tractorbynet.com

Thanks for the lead. Read through the thread and saw that many people have similar problems figuring out how it goes. The directions in the manual aren't overly clear and not everyone seems sure they have all the parts they need. The different versions are also confusing. Pictures posted in the thread that might have been helpful have succumbed to link rot so will try following the directions as best I can. They start by saying to remove the upper and lower pulleys, install a "mid-hub", and then put the pullies back on... Given that it's a used machine, there's hope that step has already been done. I don't have a "mid-hub" lying around loose.

 

[Richard001]

Thanks for the lead. Read through the thread and saw that many people have similar problems figuring out how it goes. The directions in the manual aren't overly clear and not everyone seems sure they have all the parts they need. The different versions are also confusing. Pictures posted in the thread that might have been helpful have succumbed to link rot so will try following the directions as best I can. They start by saying to remove the upper and lower pulleys, install a "mid-hub", and then put the pullies back on... Given that it's a used machine, there's hope that step has already been done. I don't have a "mid-hub" lying around loose.

You could try a PM to the posters on that thread and see if they respond. They may still have the photos or maybe some help for you.

Richard