B2601 seat switch ..help!

   / B2601 seat switch ..help!
  • Thread Starter
#22  
   / B2601 seat switch ..help! #23  
I heated up the spring beside the safety switch on my B2601. It was a long time ago and don't remember how hot but guessing around 600 degrees with a heat gun, not enough to discolor the spring, but so that the switch wouldn't kill the engine until I left the seat.
 
   / B2601 seat switch ..help! #24  
Anybody that does not use a seat belt and keep the ROPS in place whilst operating any machine equipped with them is an idiot who steals oxygen.
 
   / B2601 seat switch ..help! #25  
Anybody that does not use a seat belt and keep the ROPS in place whilst operating any machine equipped with them is an idiot who steals oxygen.
Four posts in 2 years, and this is the best you can do to add value to the conversation?

I'm happy stealing oxygen!
 
Last edited:
   / B2601 seat switch ..help! #26  
Whenever I need the seat safety switch to stay quiet (particularly when mowing fields on hot days when I like to stand up to relieve my butt for a few go-rounds) I use my trusty bungee cords strapped across the back of the seat [to the ROPS] to keep the seat in place. Works fine on my B2650 so should work on a B2601. BTW several bungee cords strapped on the ROPS in back and the brush guard in front are handy and always seem to be used for one thing or another - for example keeping the top-link up and away from banging against the PTO cover when no implement is on the three-point.
 
   / B2601 seat switch ..help!
  • Thread Starter
#27  
Whenever I need the seat safety switch to stay quiet (particularly when mowing fields on hot days when I like to stand up to relieve my butt for a few go-rounds) I use my trusty bungee cords strapped across the back of the seat [to the ROPS] to keep the seat in place. Works fine on my B2650 so should work on a B2601. BTW several bungee cords strapped on the ROPS in back and the brush guard in front are handy and always seem to be used for one thing or another - for example keeping the top-link up and away from banging against the PTO cover when no implement is on the three-point.
yep! Thanks!

I use the rubber bungees, but have not strapped the seat...yet! ;-)
 

Tractor & Equipment Auctions

2012 KENWORTH T800 SLEEPER (A50854)
2012 KENWORTH T800...
2017 Ford F-650 Mason Dump Truck (A50323)
2017 Ford F-650...
RIGID 150 PSI AIR COMPRESSOR (A50854)
RIGID 150 PSI AIR...
2013 John Deere 824K (A51039)
2013 John Deere...
2018 John Deere 245G LC Excavator - Hydraulic Thumb, Tooth Bucket, 56K LB Class (A51039)
2018 John Deere...
MEGGER EZ THUMP (A50854)
MEGGER EZ THUMP...
 
Top