kubota b2601

I am looking at replacing a John Deere 855 with a 380 frame mounted plow. Does anyone have the Kubota B2601 with the 4 point hitch (B3410 for B01) and the 60" HD front blade (BX2812A)? I would appreciate to hear your thoughts and if you have any pics. I have not been able to find any on...

Less than 300 hour, 10 years old. Pictures do not make it look beat up, The asking price is what they cost new then. OBRO. I want to move up from the 2wd B7200 HST that gets "yard and garden duty", but do NOT want a larger tractor . The B2601 is only 3 inches longer! ;-) I bet I'm...

So next project is going to be some protection from falling limbs, branches and to help protect me when I flop her. (Not if.... I have rolled and flopped too many vehicles to not do it eventually) 🤪 This may be slow, but this thread will keep me motivated to get it done in a few weeks...

Hi all, Does anyone know if I can use a Kubota FS1000 48" Tiller with the Kubota B2601. My son in law lent me this tiller and I want to be sure that it can be used before I unload it off the trailer. This tiller has a sliding shaft with the PTO connection on one end and it slides into the...

So talked to salesman he said it's typical, so keep travel pin in. I've never had hydraulics bleed down unless an external leak (don't see) or internal leak by a spool valve with junk. Is this "normal?

I am searching for 3-4 inch wheel spacers... Can someone tell me what other kubota models have the same lug pattern and fitness as my B2601? Thanks

What hydraulic side link are you using for a Kubota B2601? I'm adding Top&Tilt and found the appropriate hydraulic top link at Summit, but they didn't know what side link to provide. The side link extends roughly 14"-18" but not finding anything online that is close to that range. Any advice on...

Hello Everyone: I have been a Kubota owner for quite a few years, starting with a BX2380 and now a B2601. I loved my BX2380 and ended up with about 350 hours on it before selling and upgrading to the B2601. I had 1.5 acres when I owned the BX2380, but now own 22 acres of all woods. I have...

I've got a B2601, and theres a good deal for a RCK-54-24B nearby. I know this isn't my model (RCK54-34). What kinds of issues/modifications should I expect if I try to make this work? Is this a non-starter? RCK54-24B is like new for $1000.

Time for a coolant change on my B2601. Does anyone know if there is a plug or something on the engine to drain the block. I would guess that just removing the lower radiator hose, you would still have near 50% of the old coolant remaining in the block.

I have the factory third function with the two buttons on the front side of the loader joystick where I hit them all the time. I thought I would get used to them but I don’t seem to be getting any smarter. Has anyone seen a thumb switch third function?

I have used both belly and 3 point mowers on other tractors. I get the annoyances and benefits of the two types. My question is this: I have a really soft yard. Which is less likely to tear up the turf when turning? Has anyone tried both on the B2601?

Well, I thought I'd submitted a review of the B2601 in the Reviews area, but I made a mistake on the hours. Went to correct it, and it was not there. So, I'll sumit it here and let the guy(s) who check this site move it to Reviews. I bought the B2601 in January, driving 2 hours up to...

Getting ready to sign the paperwork for new B2601 and suddenly I get an “Oh by the way” you cannot use the mid mount mower with the factory wheel spacers. In the original online build it prevented me from having both but the dealer initially said Kubota only does that because you cannot use...

Friend has 100 acres but "usable land" hardly none. His main use would be to fix up his steep gravel driveway. I would guess that R1/ag tires are a must for traction. The tractor is pretty light, how well does a B2602 (or possibly B2301) do with traction? Worried that he needs to step up to a...

I bought a used LandPride finish 3-point mower and need a PTO shaft for it. Raised, it is 34" from gearbox shaft end to end, and lowered it is 35". I'm assuming I will need to cut anything I buy. Where will I find a reasonable quality PTO shaft that isn't ~$360? I would like the couplers...

Went to go mow next to the road this morning with my little kubota. Tractor got a little stuck in the muddy ground. Backed out and saw what looked like water on the ground. Dismounted and saw that the rear tire had busted it's bead and there was hydraulic fluid all over the tire. Puddle was...

I have a 1100 hr B2150 that other than a slight oil leak from the steering seal runs flawlessly. I do also need a new gearbox on the mowing deck. But other than that she starts every time and does what I ask without fail. I have been eyeing a B2601 with QA and third function and a rear...

Need some advice. I have a 2013 Kubota BX25D with front snow blower and mid mount 60" mower with 455 hours on it. Went to dealer today and I can get obnoxious amount of $ for it. I use it for turning a large garden, mowing 1.5 acres, moving large logs as I have a wood burning stove, and most...

I have 3 acres to mow, i use a 60" mid mount mower on my B2601 it takes me about a hour 20 min to mow the yard. I have been told a zero turn could cut that time in half is that true? When i mow i do not back up i mow at a angle to reduce the wasted time backing up. Thoughts?

The B2601 was delivered this morning. $11.44k difference for it plus 5 ft box blade and added hydraulic on FEL and JD 2025R 2015 trade-in. $13k for the JD. He had a buyer up there (Winchester) for $14k. Retail on the 2025R is about $17k. Was MSRP on tractor. Gave $1,000 off on it and $400...

Hi All- My B2601 not starting; traced the issue to the 10amp fuse tied to the headlight panel. Tractor starts and runs after disconnection of the multi-lighting switch. After further recon, found that the wire harness connecting to this lighting switch has a yellow wire that is identified as...

Got a dumb question. I have a B2601. The three-point hitch lift only seems to engage when the lever is in top of its range (7-8). I've had it for a couple of years and I don't remember it having that much 'slop'. I've got a box blade on it now, but I seem to remember it doing it with the...

I purchased this B2601 used. The backhoe was on when I purchased it 6 months ago and I just got around to taking the backhoe off and installing the three point. Are these stabilizer arms bent? When I looked at the machine before purchasing it, the previous owner had them off the tractor and in...

Sold our BX2660 that my wife used to cut grass and went with a B2601 with a 60" mmm, FEL and 4' box blade. I wanted to work under the tree limbs and tight quarters that my Grand L could not fit under or around. I no longer own a truck or trailer so waiting patiently for the new tractors arrival...

It’s been too long since i’ve been on these forums. Last time I was on here I was complaining with other JD 2305 owners of the poor design of the transmission/PTO. So after yet another major drivetrain issue with my JD 2503, I’m going to send it to the salvage and get a sturdier tractor. We...

What is the maximum size wheel spacers you can use on a B2601 that will clear the 60" mmm? Thanks

Greetings, I’m looking at new a B2601 but I can’t take delivery until August according to the dealers in our area. I would be willing to consider a like new preowned unit if the price was fair. I would love to find one with FEL, BH, mid mount 60” mower, tiller and box blade. Thanks to anyone...

Hello all, My first of many questions for the group. I have a BH70 on a B2601 that I want to take off. I've watched all the videos of removing other models and it seems pretty straightforward. My question has to do with the hydraulic hoses after separating from the tractor. All of the...

For our new 10acre lot, I am looking at a Kubota b2601. Would be used for landscaping, snowplowing, mowing, and clearing. The equivalent kioti seems to be the ck2610. Given the extra weight of the kioti, I am wondering if I would rather have the lighter weight of the Kubota for mowing?

I'm curious to learn if it is possible to remove the Front End Loader without the Bucket attached and if the Loader assembly will remain stable if stored without the Bucket? The reason I'm considering this, is because I don't plan on storing my B2601 with the Loader attached and I may want to...

What a wonderful find for a new owner to discover this site. I recently bought a new B2601 loader tractor with a ballast box and a plow. My driveway is 100 yards long with a parking areas of about 30x30' and 50x50'. Because of my location, unless you have a turn around for a firetruck and the...

Big day finally arrived. When I got the call the tractor was ready I caught on to the fact they kept saying "Box Blade" and I had ordered the RB1560.......rear blade....well honest mistake they had prepped a BB1260......which I probably would have gotten in the Spring anyways. So.....just keep...

I'm working with my dealer on pricing both the B2601 and LX2610 (ROPS, not cab). Initial purchase will be loader/bucket, grapple, pallet forks. Maybe a flail mower or LaneShark or both. Trading in my BX1860 (MMM, loader). We moved from a 2 acre property in Massachusetts where I mowed the grass...

While on one hand I cringe a bit with RevTurbo's experience this week with his 2601 delivery (sounds like the dealer is making good) I am happy on the other hand with the fact I just put a deposit down on my own B2601. Landed on what I feel is a decent deal. I went with Turfs (plan on getting...

Well, after about a 3 months of shopping and a month of waiting for it to show up, my new B2601 was delivered Saturday. I bought basic implements, FEL, QA bucket, belly mower, quick hitch, pallet forks, rear blade, 3rd function and rim guard. I do plan on using this machine primarily for fire...

So I got in my first local quote for the 2601 with the list of attachements/options below. They literally quoted MSRP for everything which comes to $28,579. I then asked them to load the rears with Rimguard so $29,200. Less $1,300 in Kubota rebates......$27,900. No reason for me to move...

Found a used 2019 B2601 with FEL /BH that is what I am wanting but it is 350 miles away, was wondering how much I might expect to pay to have it transported to my place? I do not have a way to transport it. it would be a mostly intestate haul. Thanks

How does a Woods RC4 compare to a similar LandPride orange 'bush hog'? Or, what rotary mower - bush hog - shredder do you recommend for a B2601 and what is a reasonable 'street cost' for it? LandPride for me is $1620 with an unknown delivery date and a Woods RC4 is $1200 and two weeks as...

I plan to take down somewhere between 100 and 200 trees and dont really feel like having constant burn piles, so I'm thinking about getting a chipper. Do you have any recommendations for one? Thanks.

Hi All, Have just started kicking a few tires. I contacted three VA Kubota dealerships and one got back to me with a quote. I wonder if a B2601 for $15,000 and a LA435 loader for $4,225 and a 54" midmount mower for $2,400 is a decent price? If I do cash, Kubota and cash incentives total...

Ok, so I had a BH70 backhoe added to my Kubota B2601 since I have so many digging projects. It may be my imagination, but it feels like I have lost some lifting power from FEL in terms of lifting power. I feel like when I reached max lift before the engine would bog a little but I don't get...

Is the rear PTO housing on the Kubota B2601 HSD steel or aluminum?

Has anyone relocated their hydraulic connections to the same position as the new models? It will save some skin on the knuckles.

Hydraulic Auger Would like to get a Frt mounted post auger for my B2601 with a 434 quick attach frt loader on it. Posts and Shrub planting, would like 12in aug if possible. Anyone have experience with such a set up?

I知 ready to buy a B2601, but noticed a couple odd bits about it. The bx models have option for bolt on cutting edge, yet the bigger B models don稚. Does anyone know why? I run heavy equipment, and all loaders and skid steers we have, have bolt on cutting edges. So seems odd that the smaller...

Anyone have a 60 inch mid mount mower deck for a B2601 they can take a few measurments off of? My dealer, nor Kubota Canada can answer my question. I want to know if the RCK60-29 from my 2013 B2620 will fit on a B2601. I know the deck model number and part number are different, and that they...

Hi All, So really enjoying and getting good use out of our B2601. At around 15 hours currently. Looking to get an auger 3PH attachment. Pretty sure I want one of the Everything Attachments ones but which...the subcompact version or the compact version? Any other recommendations? I have a...

I originally posted this as a reply to another thread, but I guess it was a dead thread because I didn't get any response so I will repost. I have a BX2370-1. Love it, its been great. But now I think I'm going to go bigger. Why? 1. I want to be better able to lift out rocks and small stumps. I...

New member here...been lurking for a month or so. Like many here I am new to the compact tractor market. Would appreciate the collective wisdom of the group(I have scoured them a bit for data on the tractors I am considering - much appreciated!) Need: We recently purchased a 2.5 acre property...

B2601/LA435 Quick Coupler Leaking Got a new tractor a few weeks ago. 2+ hours on it. Checked the fluids and found the transmission really low. Then saw a puddle of hydraulic fluid under the right side. Looks to be coming from the bottom of the Quick Coupler. Top of it where the FEL hoses...

Title pretty much says it all. Picked up a new B2601 w/loader over the holidays. Need a box scraper for driveway maintenance. About, say, 700 feet. What would be the optimum size? Thanks, -Steve

Well at the tender age of 72, I suddenly discovered I needed a tractor. Seems the 70 acres or so I've got are just not willing to mow or clear themselves (dang ingrates), so I have to do it. Spoke to a number of dealers, the Mahindra dealer was too far away if I needed anything, JD was a tad on...

I recently started using my new B2601. The treadle pedal is very hard to press forward or reverse. Is there some adjustment to make this easier? My previous tractor was a Power Trac 425 that had a hair trigger treadle. This is going to be difficult to get used to. Patrick

I'm going back and forth on the two. What are the major differences? From what I can tell is that the B2601 has low mid high gearing and 2025r has low and high?

I need a smaller tractor bigger than a BX on my 40-acre homestead and out on the farm. The BX's I have use have too little ground clearance, tires are too small for a pasture, and they lack torque to pull any descent grass load mowing my front yard with a 54" deck. Primarily, I'm debating a...

I want to down size on tractors. I currently own a John Deere 3320. Nice tractor, no complaints with it. I've used it about 1,000 hours. Mostly have used it for snow removal. Did some digging, and mowing. I no longer need a big size tractor. I have a heafty driveway to plow, etc. I'm looking...

I rented a kioti cs2510 today as I can't rent the Kubota that I'm interested in. I did some simple work such as moving some rocks, ground work, etc. It seemed like it have a VERY difficult time pushing dirt around. I also had to really mash the reverse to even get any where. I'm not too familiar...

Help me decide, Kubota L2501 VS Mahindra VS Kioti Hello all, New member and first post here I come from a hobby farming background ( 100ac in total, 63 ac workable and 27 of carolinean woodlot) and have been around mostly old Farmalls of course without a FEL, well the times come I need...

I just took possession of it a couple of weeks ago and have hardly used it. I removed the FEL a few days ago and went back to reattach it and somehow got it out of line with the receiver and the hydraulic lines on the FEL came in contact with the grill guard and bent them and busted one of them...

Does anyone know if the RCK60-29B deck that was used on the B2920 (among others) will fit on the B2601? I realize the new deck model # for the B2601 is RCK60-32, but just curious if the RCK60-29B would work. Thanks! **

What are the brakes all about on my Kubota B2601? I've changed out brake pads and shoes many times on my cars and motorcycles. What type of brakes do we have on the B2601 or B Series? Why am I'm asking? LOL My Wife was using the Tractor yesterday while cleaning out one of the Chicken Coops. She...

Hello all - I don't post much as I'm not much of an expert on anything, but I research a lot so I've read a lot of the threads on TBN. Love all the input that is found on here. Here's my situation. I had a tractor, LS XG3032H, in the Dallas area where I lived. I liked it and didn't mind it...

Guys, I have 13 acres of mostly woods and just enough grass for a push mower (no tractor mowing needed). The property has lots of water issues and trails that need constant maintenance. I also have 200 yard long, crushed limestone driveway with a large parking lot like area near my garage I...

Has anyone done theirs yet? How many drain plugs are under the B2601 for the Trans & Hydraulic fluid? The manual is so confusing. I don't want to remove every single bolt underneath the tractor. ****, I have Japanese Vehicles. When I crawl underneath my Tacoma or Camry to do fluids? Oil...

I picked up the three filters needed for my 50 hour Service. Oil, Trans, Hydraulic. Reading the manual, it does not state which filter goes where. No part numbers #'s or location specific. The filters presently on the tractor from the factory are not numbered. Not even the same color as the...

Looking for some info that is not stated in the Operators Manual. ""Oil Transmission (HST) Hydraulic"" Three filters that I need to change at 50 hours. There's no part numbers for these filters in the manual. Does anyone have the part #'s? Is there a cross reference where I could purchase...

I have two Kubota tractors - a BX2370 and an L3560. The BX2370 has a 60 inch MMM and it's what I'm currently using to mow about 6 acres of my hilly, rocky property. I put the mowing deck all the way up, carefully scout for and remove before (or during) mowing the fist-sized (or slightly...

Been debating for some time now between a B2601 and a B2650. Currently have a BX23 that I use for mowing, loader and backhoe work, nothing else. But I'm finding I need more ground clearance, more of a traditional tractor stance (my BX gets muck absolutely packed all around the rear end every...

I am considering changing my front tires to turf. Will there be a circumference difference between a R4 and turf 23X8.50X12. Also they will be 6ply for load rating.

My buddy at work has a 2018 Kubota B2601 and he was telling me that he is unhappy with the weak loader and general poor performance of the loader hydraulics. He was saying that he is considering trading it for a B2650 or an L2501 and taking a big loss on his nearly new B2601. So... I offered to...

Hello, I am buying my first tractor and enjoying and agonizing over the search. I would use it for maintaining 150' gravel driveway (snow removal in winter/grading in summer), cutting and moving firewood around our 5 ac lot and general landscaping and projects around yard. Keeping x500 for...

I am about to purchase a Kubota B2601 and would like Top and Tilt with a Hydraulic Box Blade. My dealer thinks the B2601 is too small for all of this without removing a fender. Is he right? I have seen this setup on a BX in photographs. If this can be done, what would I need to get besides two...

I have a new B2601 which I have been doing upgrades on. I also have the BH70 and the rotating driver seat. My issue is the seat only has two springs under it for cushion and they stink. The ride is very aggressive and I greatly miss the suspension seat from my B3030. The seat has a strange...

My buddy has a newer B2601 that he wants to put gauges on and check/shim his loader hydraulics. As is his performance from the loader is such that he will stall out hydraulic lift/curl before ever getting the rear tires to come up. So I told him that I have the gage to install in line, but I am...

Back to the forums for some advice. I have a Kubota L4701 with some heavy duty attachments that I use on my 60 acres. It is a mix of pasture, scrub, and heavy trees. I must say it is a real workhorse. Fast forward to today and I'm buying another property. This one is 4.7 acres. It is...

Can anyone look at their B2301/2601 with mmm and take a picture of the orange link that runs from the 3 point arm to the mower? Mine is broken and I think it was installed backwards . I have enclosed a picture of mine.

I have a B2601 without a loader and want to put one on it. The LA434 seems nice, but I know sometimes there are aftermarket solutions that are just as good for less money. What are my options for this? Is there a reason to only go with the Kubota loader? Do these pop up used, or is that an...

I am thinking of upgrading from my BX2360 to a B2601 and test drove one at my dealer and was surprised to feel how stiff the HST pedal is especially in reverse. It felt like I was trying to drive it with the brake still on (it wasnt). Do those of you who own either models find the same thing a...

Thinking of moving up from my BX25D to the next size tractor the B2601. Main issue is space in the shed. Anyone know the LOA of the BX when parked from the tip of the loader bucket on the ground to the rear most surface of the tucked BH vs the same measurement on the 2601? Trying to determine...

Hi Everyone- Newbie here. Just took delivery of a Kubota B2601. :-) Im getting ready for winter and doing my chain homework. I will need chains for sure. Has anyone out there had to put rear spacers on their B2601 for chains to fit? I want F&R chains. Im being told by one dealer I can...

I just took delivery of my 4th Kubota B series, a B2601. The tractor runs great and performs well, however the HST pedal is very stiff forwards and back. I can not find any grease fittings to fill and only see a neutral arm with two spring positions to choose from. Wondering if this is just a...

Just bought a 2016 B2601 with several implements but no bush hog although it does have a 60" belly mower. I know I can't cut down saplings like the BH, but I want to know how aggressive an overgrown field can I attack with the mower? Any experiences shared would be much appreciated. thanks.

I have had the machine for a little over a year, not a bad machine, but do not use it like I thought I would. More mowing than anything. I need to get a rough idea of what I could sell it for private party. The machine is the B2601 with quick attach bucket, 54" mid-mount mower and grass...

I've currently got an older BX2350, ex a contracting outfit. I got it cheap at auction, it's pretty beat up, but mechanically seems sound. It does most stuff I need, although I occasionally wish I had more power, more lift, or more speed. I have budget approval from the better half to get a...

Have 6 hours on my B2601, the one thing since new is the frt loader bucket is not parallel to the ground. It about a inch or two higher on the left then the right when off the ground. Lies flat when on the ground, hits the asphalt with a thunk/thunk when lowered. My old L2250 was still parallel...

I realize this is a silly question but does anyone know what makes the B2601 3.7" wider than the B2301 (as listed on the Kubota website)? I'm guessing it's just the larger Ag tires which are optional on the B2601. If so, what is the width of the B2601 with turf tires? Would it be the same as...

Good news and bad news for this purchase for me. The good news is that on 7/5 a new B2601 with FEL, 60" bucket, 60 inch belly mower, grill guard, accessory ROP lights, with liquid weight in the tires will be delivered to my house! Yeah. Kubota had a promotion that ended today that saved me...

I'm ready to go to my dealer and pick up my goods to do the first service on my machine. Looking at the manual..." Four Gallons " for the Transmission. Really? Is this a misprint? I'm accustomed to working with Quarts. Man, I'm gonna have to use a 5 Gallon Bucket and have to lift her way up off...

hey guys! i just got a new b2601. i would like to make her a little more stable. id like to make here 4-5 inches wider... is that too wide? what model number and where should i get these? -thanks

I am getting ready to purchase a new Kubota 2601 with a snowblade and power angle. The dealer indicates the 72inch would have to much side push and will slide the 1600lb tractor. The 60 inch just barely covers the wheel span at full angle tilt so I thought the 72 would be better. Any thoughts...

After going through our less than winter winter. Comparing it to our old B7510, The good: More power, cup holder (not the best place, but we have one), quieter, mower seems to go on easier (I think it just me), didn't get to use the blade this winter never had enough snow to use it. Radiator...

HI everyone I have finally decided to buy a New B2601 and it will be delivered tomorrow, Have been looking for about 9 months and it all came down to price and comfort. There is a JD, Kubota, Massey and a TYM dealer here and was going to buy the TYM 234. I was looking around for the 1025r, GC...

i am in south east pa. i found a price for 18700 with rebates on this machine with fel and mmm. What do yall think? i also have a 2008 nh tz25da with mmm and fel w/ 775. i was offered $6k for trade but maybe can get closer to $8k for it privately??? thanks...

So... I backed into a stump and broke my hydaulic filter housing... The steel line that runs from the filter housing to the front of the tractor appears dented and bent a bit too. So, I'll be replacing it as well. The housing is simple but, the line WILL NOT COME OUT!! I have it unhooked but...

Replacing a 31 year old L2250 gear Tractor with a B2601. Want a Backhoe to plant trees, put in a couple Koi ponds and replace a field drain tile. I have 16 acres total with 3 acres of grass, lots of trees, hills and turns. Will get a 60 in mmm. Whats anyone's experience with this combo.

So we are getting down to the wire in making a decision on a tractor for our property. Mostly cutting grass, a little food plot work and some front end loader work. We are getting a: 60" pull behind finish mower Front end loader 58" tiller Price for the Kubota comes in at $21,870 and the...

Ive settled on a B2601 to replace my 1985 L2250 which I've had since new. 60 in mmm, 60 in QT front loader and 70 series BH. Several questions to start. No experience with suspended deck, been using contact decks for 42 years. Any issues on rugged terrain. My place is not a smooth football...

Hello, Long time reader, first time poster. I'm looking to buy a tiller or disc for my Kubota B2601 19.5 PTO HP. 540 RPM. I'll be breaking around 2-3 acres and I'm torn on what to get. A 4-5ft disc or a 4ft tiller... Any input for my tractor size would be appreciated. Thanks

Kubota B2601 with industrial tires with FEL 54" Bucket quick connect, Land pride 48" Box scraper, Land PD10 Auger and Tow ball hitch $18,000 Taxes not included! Good, fair or bad deal?

I will be buying a grapple soon for my B2601. It will be either the EA wicked 50" single lid or the Landpride SG0660. The main duties will be manipulating oak cuts as pictured below and servicing my wife's penchant for placing large rocks around the yard. My question is related to the design of...

I switched out my old rear control valve in favor of the Kubota OEM valves mainly because I needed float on one of the valves for my flail ditch mower. Here are (hopefully) pictures of the old system and I will follow up with pictures and some instructions on the new OEM valves.

The temperature needle on my B2601 only goes about a quarter of the way up in the summer and stays down in the cold marked area in the winter. Can anyone of you B2601 owners tell me what temperatures your gauge is reading?

Picked it up today, B2601/54"mmm/60" SSQA Bucket/Front Remotes/BH70 Backhoe/Loaded Turfs!! Can't wait to start putting her to use, maybe a foot of snow coming on Thursday to play around in, but the real work will be in the spring doing the site work for my pole barn!

is this a quick/clean bolt up? anyone tried it? please with results? I sat on a 2601 recently...seat was impressive by comparison.

Hey everyone, This is a tough one. I'm getting ready to pull the trigger on a new compact tractor and have narrowed down my choices to either the Kubota B2601 or the Kioti CK2510, both with front end loaders and 60" belly mowers. They are about the same size though the Kioti weighs...

Hey everyone. Off hand, does anyone know what the weight of a B2601 with LA434 FEL and BH70 BH attached? Will be shopping for a trailer soon. Thank you!

I got first quotes today on a 2601. With just a 60 in mmm.(list $18,316.00)$17,212.00 delivered. With qd 60 in FEL and BH with 12 in bucket and mmm.(list $30,239.00)$29,456.00 delivered. Am I there? Thanks

I will be pulling the trigger on a new B2601 FEL, BH, And MMM as soon as I decide on which PHD is right for me. I had my heart set on the Landpride HD25 SSQA/tractor mount and 12" auger.($2300ish) My dealer called me today after he called Landpride and told me: Landpride does not recommend that...

I dont actually have my tractor yet, but i should have in a couple weeks. Currently have 5 acres of mostly wooded with some grass/cleared area & need to do some cleanup. I lurked around for several months and decided on the B2601 after reading a bunch of posts (after initially thinking BX...

First post and I'm stuck between two models. I worked on a cherry farm half my life so I've driven a lot of tractors, but I've never had to buy one myself. Now I do and I don't know enough to make a decision. I just bought 5 acres of wooded land, with a dirt road, on a lake with a sandy...

So I've been trolling around on here for a few months as I was looking to finally upgrade from an old Yanmar 1500 to take back my property with. Shopped around for a while and ended up ordering a B2601. Took forever to get the deal done and it all built but finally was able to trailer her home...

Wondering if any recent buyers could give me an idea of what they paid for a 60" mmm on a B2601 OR a B2650? Short version, I think my dealer is leaving out a $500 rebate I was promised and pocketing the money. See below for the long version. I've got two itemized quotes: one on a B2601 which...

B series: need advice asap I'm days away from trading in my bx2370 for a B series and need to choose between the 2601 or the 2650. My biggest question is whether I'll be happy with the power and hydraulics of the 01. I think the 01 is the best fit for my property but 2 friends steered me towards...

I am trading up to a B series from a bx, and was on the fence between a 2601 and a 2650. I was leaning towards the 2601 until my old neighbor went down to the dealer with me and talked me into the 2650. More power, bigger hydro pump, more versatile backhoe, that kind of thing. He's an old farmer...

I have a few questions. My dealer tells me I need to figure out if the Backhoe is open or closed center. Does anyone know? They say I cannot use an open center valve. Also does anyone know which ports in the valve body I should attach the hydraulic fittings?

I went back to the Kubota dealer this morning to inquire about a larger frame than the BX25D. I ran the B2601 they had on the lot and really like the gear drive. But looking at the Kubota website, they have a smaller loader and smaller backhoe than the B2650. I asked if I can get a larger...

Hello Orange enthusiasts! Ive been researching to buy a new Kubota so naturally that means i've also been scouring the interwebs devouring as much info as possible. After all, research is fun (and free)! I have 4 acres, 2.5 woods & 1.5 lawn, with a small pond. Initially, I was looking at...

So, I'm talking to my dealer about buying either a BX25D or B2601. From what I gather, you cannot raise or lower the MMM if the BH subframe is in place. They recommend having either the MMM or BH+subframe, but not both at the same time. Now, switching this subframe in and out sounds like a...

I grew up on a Farmall 150 and Cub. Fast Hitch is all I've ever known but the family Farmall tractors are wore out and frankly, we don't plow and plant big fields anymore. Two groups of equipment I'm considering: Group 1: Kioti CS2410 vs Kubota BK25D Group 2: Kioti CK2510 vs Kubota B2601...

With 2.5 acres, it seems a SCUT such as a Kubota BX-25D will handle all my mowing, digging, and other needs. After narrowing my choice to a Kubota BX-25D or a Massey SCUT, I realized I had missed the most important factor of all: my comfort during usage. Someone pointed out that any SCUT is...

Sharing for the common good. I received a message from Weidmann Bros. when I asked about the availability of a cab - they won't have the hard top cabs ready until spring. Looks like I'm in for a cold winter.

As anyone located extra wiring for work lights like the BX and other models have? I looked under the fenders and didn't see any obvious extra connections.

I took delivery of a new B2601 with a Canopy, 54 inch MMM, Quick Attatch LA434 loader with 54 in bucket, and a set of Woods QA pallet forks. It was kinda sad to see my BX1860 leave, but the power of this B2601 while chopping up 10 to 12 inches of wet leaves was wonderful. My only...

Good evening folks, I live outside Colorado Springs and am looking to buy a new Kubota 2601 with FEL and 50" tiller. Here is the price per my local dealer: B2601HSD 26HP 4 WD Tractor with Industrial Tires & LA434 Loader $18,416.00 RTR 0550 Reverse Till Rotary Tiller...

With winter around the corner, I'm looking for a snowblower for my B2601. The dealer is suggesting a B2782B (63 inch). The Kubota Canada website doesn't list that model, and lists the BX2750D as the only snowblower for the B2601. So, are all of the B and BX series snowblowers compatable with my...

Went to a Kubota dealer yesterday and looked at these two models. I will plow snow and do light maintenance on the property. The brochures for both models talk about "newly introduced" and "newly designed", and how they bring simplicity, versatility, power and comfort to tough jobs. Maybe it is...

Yes, I know it doesn't count until there are pics... Delivered today. Got to spend an hour playing with loader and brush cutter. I am going to really enjoy this. May get back out to the property this weekend and get pics and work some more. That is if we ever have another day without rain...

Got 0% approval and dealer is getting my(our) new B2601 in the next couple days:dance1:. I have the best wife ever:D. She got on here, read a bunch of posts and said no Branson and BX is too small. Still need to decide on the extended warranty and insurance. We wont put many hours on it over...

Dealer said i can get one with a loader for $17,000 new and if i get another implement i can get 1,000 off. I asked for the B2650 but for some reason he ignored my asking and gave me the price of the 2601. :rolleyes:

I like the idea of having a backhoe, but to do so, I'd have to settle for a slightly smaller tractor in the BX25D......adding a new BH to a B2601 would take another ~$7K....yikes......here are the two quotes I have received for what I'm looking at...... 1. The Kubota BX25D with loader...

I'm a big guy that is looking for a tractor to handle mowing (3 acres with hills and slopes and plenty of obstacles), FEL w/quick attach bucket for moving mulch, topsoil, and relocating snow, snowblade with hydraulic angling, pallet forks, and possibly a BH but don't have an exact job for it...

Neil Messick sent me this yesterday. Still putting her together but I think she looks great.

Well I finally pulled the trigger on a new tractor. I signed the papers today for a B2601 with FEL, 60" QA bucket, I added a rear hydraulic remote and the 20 amp alternator. While my tractor is sitting on the lot, I have to wait for the alternator and remote to come in so I won't get it until...

Hello, I am looking to get my first tractor. I have 17 acres. About 1 acre of lawn, 5 acres of grown up farm field, 5 acres of wood, etc.... Looking to mow, take care of snow, bush hog overgrown stuff, etc... Looking to see how you like it if you have one and what you got for a price. I...

hi All, getting within a few months of making my tractor purchase. I am struggling a bit with my decision and here is why: 1. I have hilly property and I want to be able to use the tractor on hilly part someday. I know the BX25D has a lower center of gravity and with spacers can make it even...

I went down to the Kubota dealer last Monday, thinking I was going to buy a BX25D but looked at a B2301 and decided to go that route instead and ordered a B2601, while we were doing the paperwork, two B2601s showed up on their stock order truck. So anyway it got delivered yesterday with the 54...

I'm looking for opinions from anyone who upgraded from a BX25 to the small size B, I'm specifically looking at the new B2601. It's more money than I figured it would be to upgrade after talking to the dealer so I'd like some feedback on how much more capable the BH65 backhoe is as well as...

Hello everyone... I'm in the market for a tractor, and came across a couple threads here discussing Kubota's new B2601 model. I was looking at the B2620 previously, but after learning about the B2601 here, I went to the Canadian site and learned more about the 2601. After comparing the two...

Yesterday I learned that Kubota is introducing the B2601 in 2015. Looks like a nice tractor with new improved ergos. I'm considering trading in my ZD326 for one. My ZD326 is a 2014 model with around 75 hours on it. Runs great. But I'm not in love with it. It's a 60 inch cut and really...