3rd function kit

[RNeumann]

Anyone seen and or used this kit? It appears to use a good valve and a simple, low cost switch. If you can have your own hoses made I don't see a downside.....what say you?

Fasse Rexroth Third Function Hydraulic Diverter Valve Kit Model EH2KL

 

[scdeerslayer]

Looks like that's a diverter and not a true third function if that matters to you.

 

[MtnViewRanch]

Seems a little pricey. You don't need a 24GPM valve. Here is a better priced kit if that's what you want.

 

[RNeumann]

Ok thanks for the info. I guess a diverter has 6 ports and a true third function has 4 ports. Thx for the info on a better price!

 

[lt190b]

Seems a little pricey. You don't need a 24GPM valve. Here is a better priced kit if that's what you want.

MtnView, can (should) you run a hydraulic motor with the diverter valve kit you linked? If not, any suggestions?

 

[kennyd]

We sell ours for $275

Ken's Bolt on Grab Hooks <<Hydraulics>>

 

[MtnViewRanch]

MtnView, can (should) you run a hydraulic motor with the diverter valve kit you linked? If not, any suggestions?

You can use a diverter to get the additional set of outlets, but the main controlling valve should really be a motor spool valve (a control valve specifically built to operate a hydraulic motor) which most people don't have, so you need to always keep in mind that you should slowly feather the valve closed when stopping the hydraulic motor.

 

[lt190b]

You can use a diverter to get the additional set of outlets, but the main controlling valve should really be a motor spool valve (a control valve specifically built to operate a hydraulic motor) which most people don't have, so you need to always keep in mind that you should slowly feather the valve closed when stopping the hydraulic motor.

?? So a set of outlets, from a diverter off the curl/dump function of a fel won't work? I don't see how you can scroll between curl/dump and motor on, when the motor is on? What am I missing?

 

[MtnViewRanch]

?? So a set of outlets, from a diverter off the curl/dump function of a fel won't work? I don't see how you can scroll between curl/dump and motor on, when the motor is on? What am I missing?

You can't. The proper way to operate a hydraulic motor is to use a motor spool valve. The problem with a motor spool valve is that you can not use them for cylinders. So with you using your loader valve and a diverter to run I assume a hyd PHD, you need to keep in mind that you need to feather down the motor before you let off the diverter control switch.

Lots of people do this without any problems, but that does not make it right.

 

[lt190b]

RNeumann, sorry for the hijack. And thanks to MtnView.