I examined the shifter linkage and the roll pins are in place. The knuckle joint that connects to the bottom of the shaft and the lever coming out of the transmission was loose. I tightened everything up and started adjusting the linkage. I was able to find a sweet spot to place the shuttle...
Having issues again with hydraulics. The 3 point hitch raises extremely slow and the FEL is responding very slowly as well. I just changed hydraulic fluid, filter, and cleaned the screen to see if that would resolve the iss. No luck.
When it was in the shop and the mechanic had this issue with...
I have a Century 3045 and the shuttle is not engaging correctly. It’s hard to get it to go in forward or reverse at times. When it doesn’t slip in you can hear it grinding. Is there an adjustment for it?
Finally picked up my Century 3045 after a little over a year in the shop. The mechanic is a good guy and a good mechanic, just didn’t make it a priority to get it out.
When I picked it up he said that the problem was an air lock in the hydraulic line to 3-point hitch. He got that out and it...
I went by the mechanic yesterday. The 3 point hitch is down with no pressure on the arms at all. You can lift them very easily. The lift control lever has no resistance as well. The shop manual indicates it may be associated with a spool valve. Any ideas?
The hitch was working before he...
Took my Century 3045 to mechanic to work on clutch. He broke the tractor apart and I took clutch to be rebuilt and cleaned. Mechanic then replaced rear main seal leak, and reassembled. Topped off hydraulic fluid and discovered the inner seal on rear end leaking. I ordered inner and outer seals...