Recent content by Capricious

  1. C

    Parts availability for Bolens / Iseki ?

    Thank you for your response. This one is from the '80s and (reportedly) everything "works" so I will assume it has been properly maintained, at least until I can look at it. The old Japanese tractors can also, apparently, give long service even if not maintained- when I pulled the valve cover...
  2. C

    Parts availability for Bolens / Iseki ?

    Thank you for the response. "...sounds like you have experience hunting for Mitsubishi parts..." Yeah, really don't want to repeat that, BUT I just spent the budget having 510 feet of rock road pushed into the woods and now I gotta "pinch pennies" to buy a tractor for maintaining that road...
  3. C

    Bare metal epoxy primer for truck frame

    When I was doing truck frame repairs the primer I used was the cheapest rattle-cans I could find @ Wal-mart. I agree with the comments saying that if you are going to have the steel blasted, you need to get primer on it RIGHT THEN. Also, anything less than a near-white metal blast is a waste...
  4. C

    Parts availability for Bolens / Iseki ?

    Already posted this to the Iseki forum but garnered no responses: Opinions on the parts availability situation for Bolens/Iseki? And also sources of paperwork (service manual, parts diagram) Going to be looking at what is supposed to be a Bolens 1704. Had a Mitsubishi tractor a while back...
  5. C

    Parts availability for Bolens/Iseki

    Good evening: Opinions on the parts availability situation for Bolens/Iseki? And also sources of paperwork (service manual, parts diagram) Looking at what is supposed to be a Bolens 1704, although the information I have found says that this should be a hydrostat, while the tractor itself is a...
  6. C

    Price Check  Kubota M7060 HD 4WD

    Since EVERYONE wants to know what tractors cost: New M7060 $30,313.00 http://www.pcbgov.com/home/showdocument?id=6698 No mention of options. Probably a cash sale. Kubota site says list price about $38,000.00 to start
  7. C

    Where did YOUR old truck end up ...?

    unbelievable The Unexpected Explanation How "That Ford Truck" Ended Up In ISIS Hands | Zero Hedge
  8. C

    Look at these prices

    Was: $2.7m | Now: $46,000: Caterpillar D11N crawler tractor What An Industrial Depression Looks Like: Photos From An Australian Heavy-Machinery Auction | Zero Hedge
  9. C

    Fences & neighbors

    "Fence viewer"
  10. C

    Fences & neighbors

    Cedar County, Missouri, just had a vote and adopted the "local option" fence law. For a summary of Missouri's "regular" fence law, and the "local option" law, see Don't fence me in Now, in Cedar County (and 18 other Missouri counties) if your neighbor decides he wants a fence, YOU can be...
  11. C

    I need help deciding on new trailer

    "..Not sure how that slipped past quality control...." Doesn"t surprise me: Photos of shackles on leaf springs of my truck: I paid a shop to replace these (originals rusted out) and did not notice until I had the bed off 2 years later that shackles were installed facing in different...
  12. C

    Sears brush hog

    The beast: 1978 Sears "Vari-drive" 11 hp. Modified for brush-hogging; the lower 2 inches or so of the front skirt on the deck has been cut away, and a strip of 1/4" flat bar welded along what is left to restore any lost strength/ stiffness. Old single cylinder Briggs will burn 1/2 quart...
  13. C

    3.21

    Next year I plan to buy a new pickup, what used to be referred to as a "half ton." I would like to be able to tow a fully-loaded 7,000 lb trailer, which means the truck would need to be rated to tow about 8,000 lbs or more, since the advertised trailer towing load always assumes an empty...
  14. C

    What's in your Oil Can?

    My (2) oilcans, and what I fill them with:
  15. C

    Man charged with child abuse after driving kids in back hoe

    Posted this photo from Craigslist some time ago:
Top