I intalled a sched 80 pipe across the edge of my plow blade. I didnt slice it like most do, I just drilled and welded posts through the pipe and attach it to where the skid shoes pin in. That way its easy to remove when I want to scrape the path down more. I've been using this setup for 7...
This is what I use with an older Fisher plow.
https://www.palletforks.com/skid-steers/adapter-and-mounting-plates/skid-steer-3-point-attachment-adapter/169200.html
This is what I used to mount my fisher plow to my tractor. Works perfectly.
https://www.palletforks.com/skid-steers/adapter-and-mounting-plates/skid-steer-3-point-attachment-adapter/169200.html
My XR4140 has a 3 position start switch just like my car. 1) Off Position (Labeled STOP) 2) Accs / Run Position (Labeled Power/Glow Plug) 3) Start Position (Labeled Start).
The Remote start system doesn't actually wire to the glow plug, since the "Acc Run position powers the glow plug...
Hi guys,
I've had the 4140 for about 2 years now but never had the need to use the high gear (3rd) on my HST unit. I went to go help a friend about 1/2 mile away and got out on the open road (flat), put the tractor into high gear (for transport mode) and tried to drive it. It would barely go...
Hi all,
I know this may sound weird or stupid, but I just have to ask. I live in Maine and it gets cold in the winter. I have an attached 28'X28' single 22' door well insulated garage attached to my house. I had a tech come and clean my furnace last year, and he asked me if I had ever thought...
Hi all,
I'm just checking to see if others are having a knocking sound from the ceiling of your cab when the tractor starts or switching the vents blower selection. I've been having this issue for a few months now. Sounds like it's trying to change the airflow flaps inside the heater, but its...
I was somewhat in your shoes. I plowed my private road (3/4 mile) for years with beater yards trucks. I got sick of buying/fixing/selling the trucks so I bought a Tractor with a cab. I ended up with a LS 4140HSC. I used one of the 7.5' plows from one of my old trucks and mounted it to a QA...
Ok... I have a simple question, but I can't find a "complete" answer to. I have a XR4140HC
What service is done at the 50hr mark?
oil, oil filter, HST filter, grease all the zerks, what am I missing?
Thank you,
Drew
This is my first Winter with my tractor LS 4140HC. I have a 7'6" Diamond plow blade on the front and a 76" Dettson blower on the rear. In the past I've always had "yard trucks" that were not legal to use on public roads because of rust issues. I care for my own private road that is gravel...
If anyone is looking for some good info on mounting a plow on the front end loader, feel free to ask away. I have looked everywhere and researched a ton of different options. What I have come up with is in my opinion the most useful, cost effective, and easy to find parts.
I used this to...