Guys,
Has been a long time since I have posted, but having problems.
Took alternator off and had tested at Advance Auto. They said it was bad and could not cross over. Took it to a rebuild shop and said it was charging fine.
I searched here and found a thread that said to use a '72 Datsun...
Guys,
Need some guidence. My FIL has a MF135 (gas) that he says is not charging. I will go down to his farm with him Saturday to try to help him diagnose. It sounds like the voltage regulator to me, but this is what he is telling me:
meter shows discharge until RPM's are up pretty high and...
Does anyone know what a fair price for a tiller like this would be? Local guy has one that is in fair condition. The paint is peeling in several places and looks like it encountered several large rocks (couple of dents in sheet metal) at some point. Tines look to be in good condition and it...
Guys,
I am still looking at zero turns! I don't want to throw good money after a bad thing...so.. Does anyone out there own or have experience with the Yazoo YK series mowers. The one I am looking at is a 52" cut with a 19 HP Kawasaki engine. Looks like it is built pretty well without some...
Guys,
I have 3 acres to mow and have come across a used JD F1145.
72" front deck...3 cyl diesel engine...4wd...420 hrs...good condition...not sure of the year, but 420 hrs, that's nothing on a diesel.
What is a good price for this type of machine? Guy is asking $8,000. Any replys will be...
Guys,
I have a leaky injector that bugs me. I have responded on a different thread about this and I think the head will have to be pulled to fix (I hope not).
Sorry...I can't remember who said that: Ernie, California, Danny, Mark??????
It does not effect the running of the tractor, but you...
I have a 1700 and would like to add a light facing towards the 3pt. What I was thinking about doing is using the existing switch that controls the "turn signals". I was thinking of wiring the two flashing lights to one side of the switch and the light to the other.
That way; when I flip the...
Guys,
Don't mean to sound like an idiot, but do the rear tires on these machines have tubes? I have looked at the tires and they do not say tubeless, but the valve stem looks as if they could be. I am ready to fill the tires with windshield washer fluid and water. Also, how much windshield...
I have found a used '02 ZD21 mower with approx. 180 hrs on it for $5750.00. Is this in line for used or should I write a check for it tomorrow? It seems to be in good shape except for couple of dings in hood.
Alright guys; forgive my ignorance and bare with me because I am "beating a dead horse" and not real familiar with diesel engines.
I guess I have some misconceptions about what a glow plug / thermostart system actually does. In a past post that I had (2000 to 1700 thermostart); one of the...
Hi to all
I have done a search and it sounds like the 2000 comes with thermostart (or did; looked at local 2000 but did not have) and I know that several parts are interchangeable, but is it possible to take the thermostart system from a 2000 and install on a 1700? Has anyone ever tried this...
I know that I should have posted in "projects", but I wanted to share with the Yanmar guys.
The weight is made out of 10x4x1/4 tubing and is filled with scrap pieces of 1" thick plate. The voids left in the weight was filled with sand. The weight comes in around 80-85 pounds. The best thing...
RPM\'s on 1700
I want to say that my RPM gauge shows a "red line" at 2200 RPM. Full throttle will run more than that, but what is a safe maximum RPM to run a 1700 at? I will run at 2000 RPM while mowing with a 5' finish mower, but sometimes would be nice to have the extra power in the thicker...
I have just finished installing mechanical gauges on my 1700 and I had a post on the running temperature, but what is the oil pressure supposed to be. There was a post on the oil pressure for a 1500; would it be the same? I mowed an acre or so yesturday and after it was up to running temp it...
Another new yany owner question. I have a 1700 and I am in the process of installing mechanical guages, but what is water temp supposed to be around. I could have sworn that I have seen it here somewhere but I can not find through search.
Newton