Recent content by Hammer Head

My son rented a post hole auger to use on my L3800 to speed up his deck project. He called me and asked how do you apply down pressure to the 3-Point? I replied, I am not sure. The only thing I have used other than my BH77 is a York Rake. I was pretty sure the knob under the seat is only a speed...

I am planning to purchase a tank and sprayer. I will be making a platform to connect it to my loader bucket with quick connect for the power. My big question is what is the best to kill sumac and locust? I have always user Round Up, my friend is telling me to use Cross bow. Might be good to know...

My Scag ZRT STC-48V-26BS would not start, so I tried to arc the poles on the solenoid. It fired right up, so I replaced the solenoid with no change, same issue. Next I changed the ignition switch, that did not fix the issue. I can still start it by arcing the solenoid. Any ideas what next??

Hope someone can help me out! My Scag Zero turn would not start STC-48V-26BS, so I tried arcing the poles on the solenoid. It fired right up. So I replaced the solenoid, same issue. I decided to replace the ignition switch. still will not start however I can still arc the poles of the solenoid...

Had my first chance today to really use my B77. My project was to cut down a 15" River Birch and remove the stump. My grandmother could have removed the stump quicker with a pick and shovel. My Kubota replaced a Ford 1720 with a Bushog 7'-6" 3 Pt. Mtd. Hoe with PTO pump, that had twice the...

I was moving snow for the first time with my LA524 loader, I was not able to get the bucket to go into float position. Our older Kubota was down and lock for float. Am I missing something??

I would like to remove my B77 hoe and install a 6' woods blade for winter snow removal. I thought about adding antifreeze solution to rear tires for added ballast. My B77 manual states that you should not ballast the tires due to additional weight the outriggers would have to lift. I would...

After 4 weeks of waiting, got my new trailer. 18' pulls like a dream, just the right amount of tongue weight. Thanks all for the help with my choice. Now I can get it to work!

I was using my loader for the first time today and noticed the loader has no bucket level indicator. My Ford loader has a tube and rod, the rod is up out of the tube about one inch when bucket is level. Does Kubota make an level indicator. Has anyone fabricated the type I am talking about or...

Just received my new L3800HST yesterday. my Son noticed a lever down near (behind) the brake release lever. I could not find anything in the owners manual, is it a compression release?

My new L3800 is due to arrive soon. I would like to load the tires with ww fluid to save delivery time and $. I will have a BH and just want some additional weight for the few times the hoe will be removed. Somewhere I saw a post from someone (here or on Orange Tractor) in the tire Business, say...

I have a 1989 Ford 1720 Aprox 1500 Hrs. It has the Ford FEL and Brush Hog 7'-6" hoe mounted on the 3-point. The tractor is running and in fair shape with some repairs needed. FEL is in good shape. The hoe needs some valve and pin work. Just looking for a rough idea what to start with asking...

I have a L3200 on order with B77 hoe and 524 loader. Dealer did not have anything for me to measure! I would like to know if it will fit on a 16' lift gate trailer? I would back the tractor onto the trailer and put the loader out over the lift gate. I would assume the lower piviot point of the...

Nubie here, Went to the local fair the other day and walked into the Kubota display. Spent some time with the sales staff, and ended up with a L3200Hydro with the 524 loader with 66" quick attach and B77 Hoe with 16" bucket. I am a G.C. and purchased the tractor for general job site use, some...