I would like to offer this info to those of you that would like to know
how our United States Post Office works sending a envelope with about 15 pages to say Australia
hear is the rub dealing with the US post office
sending a letter size envelope with about 15 pages to Australia WITHOUT the 1 "...
I have a 1967 wards Garden Mart squire 10..
I picked up this lawnmower that seemed to be 70 % restored with a perfect engine and deck. the problem is when you turn the ignition key one click the starter kicks in .
the wiring to the ignition switch is screwed up .there are 5 wires . three of...
I have a 75 % restored 1964-66 Montgomery Wards Squire 10 Garden mart with mower deck that I came across.
I hope someone can tell me what the part number is for the deck belt.
PLUS
the air filter is a round cylinder type paper cartridge filter that measures 4 1/4 across and 3 3/4 high...
MITSUBISHI 372D 4X4
this engine has had rings and assorted related parts put into this last spring by previous owner , when I bought it ..I drove it to the back yard and it was a . sweet running tractor. the only thing I noticed was the older Diesel runs a bit noisy compared to a mid 90s...
Iseki tx1300F
$ 800.00 as is where is in Knoxville,tn 37918
Good engine-- good hydraulics good rear end
good battery
the bad---clutch and bad reverse gear
missing front drive shaft
front 4 x 4 axle condition unknown
Manufacturer: Iseki Variants: TX1300F: 4WD...
I picked up this Iseki T1300F for $750.00 including two 100 lb JD front or rear hanging weights. two worn out miss match rear tires with good rims
the front tires say T125 70 D15 the rims are shot as is the tires.
the tranny has a bad reverse-- second gear
the clutch is bad
missing the front...
I have a Yanmar F16D with a bad ring and pinion gear. What a education looking for those parts. I even found one salvage yard that wanted $1,275.00 used . yes I did tell them where to go. NOW for the good news .Southern Global tractor 601-928-7491 can order the ring and pinion gear from Japan...
its next to impossible to find a Carb kit for a ISO carb on a Satoh S550G BUT
a carb kit for a S650G can be modified to fit ... carb kit # S.70586 replaces G064 3233 990
The plunger arm shaft hole needs to be drilled out a little larger. drill it out ONLY after installing on the carb...
Lets keep this thread for hard to find Chinese tractor parts please. also don't forget the pics
I hope others will post on this thread detailed information about where to look for obsolete parts and parts that crossover to other parts that will work. Name the tractor and part number you...
Guys from the other site said it looks like a homemade tractor built by a skilled builder. this tractor was showcased in a gift shop in Pigeon Forge tenn in the front window of a gift shop back in the 70s 80s.....rope pull starter B & S engine
check out the link from another forum...
]Picked up this Dragon tractor for $ 800 . and of course nothing about it on the web .The hydraulic pump was bad and it came
with another pump that was a little different. I dropped that off at a Tech school and their machine shop crafted a mount plate to make the pump bolt up
There is a post I...
The tractor is a 180 Dragon. The issue is the hydraulic filters need to be replaced and as usual there is no info available on the web.
looks like a 2 cyl Diesel engine .Model # on engine is J285T
That is the only info on the whole tractor. No part numbers on the filters. The issue I run up on...