I have a 1531 cub that I just use for grass cutting! I no longer am able to lift the deck high enough to stop the wheels from hitting the ground when driving and not cutting. I have the adjustments at the highest adjustment but the wheels still hit the ground frequently.
Any ideas about...
Thanks I will check the compression that helps give me some direction
Lots of pressue at the breather tube and oil fill pipe when i crank the engine over the engine doesn't use a lot of oil so will check compression
It may have run a bit low for a very short period low on oil but I caught it pretty quick.i took the breather cover off and blew thru the hose and it seems clear unless I am missing something. It started and runs good just a lot of oil getting flung around via the crankshaft
My. 1541 Cub Cadet is on its second engine is a Kohler m18
First engine seized up at 600 hours
This one started with a rear seal leak so I replaced the seal but seems to be blowing oil when running
Almost like serious pressure
Oil filter is new breather is not plugged just a lot of oil blowing...
I just finished rebuilding the carb on an old M52 Onan in a Sears 917 something---Apparently a Canadian Model
Now my starter motor isn't engaging so I pulled the covers off to see the gear all chewed up. I ordered a new one ($125.00 Canadian) and am looking to find out if anyone has replaced...
I am new to this forum and wanted to say hi . I own a 1532 a 2182 cub cadet and a very old Sears tractor from the 70s
Just was out blowing snow a week ago and had a big metal on metal noise come out of the front of the 2182.
I checked and the belt had shattered taking all of the wiring with it...