I have a boomer 30 that in order to start i have to jiggle the f-n-r lever. I am assuming there is a neutral switch somewhere that needs to be replaced. Where is the switch and any part numbers?
I have a boomer 30 that moves properly in all low and mid gears. When i go in any high gears even when almost full throttle will bog the engine down and not move at all. Ideas?
I have a new holland boomer 30 with the parking brake light on constantly. I have tested the switch and it is good. I have also tested the fuses and they are ok as well. Does anyone have a wiring diagram or any other ideas?
When changing the front axle lube on my boomer 30 i see 3 drain plugs, 1 in the center and 1 on each outer hub assembly. the book says it take 1.24 gallons. so after draining all 3 do i just put the 1.24 gallons on the middle fill cap?
I have a boomer 30 i would like to change the front axle fluid on. Does it only get drained and filled from the middle hub, or does each wheel assembly get drained as well?
I am curious about 2 replacement fluids for my boomer 30
can i replace the cnhxhd coolant with the
Case IH: LUBRICANT actifull ot
Part Number 73341739
Messick's Price $32.09
also can i replace the multi g 134 transmission fluid with
Case IH: HYTRAN ULTRC 5G
Part Number 73341724
So I was using my tractor yesterday and all the sudden all the gauges locked up. Any ideas as to a cause? The fuses in the block are good. Tractor still drives fine.