Recent content by opalko

Kubota L3301. I was getting ready to till the garden spot this afternoon, noticed this when hooking up the tiller: Thought I screwed something up royally, then came inside to check the interweb for a replacement to see how much cash I'd be out of and found this: Adjustable Side Link which...

Delivered 2 weeks ago, just now getting around to posting here. Purchased with a 72" finish mower and 42" tiller. Canopy and fork arms to be delivered soon. Used the tiller and old rough cut last week before the rains came and turned everything muddy.. I opted for the gear drive model...

This is the correct wiring diagram for my CC. As you can see on the PTO switch, connections 1 and 4, 4 goes back to the PTO clutch after the two reverse safety switches. Well I have bypassed the safety switches and the connector 4 goes directly to the clutch. Does this mean my PTO clutch is...

Hello There! I have a Cub Cadet RZT50 Kawasaki that I cannot start. The model number on this mower is 17AA5D7P756. With the key in the ignition and turned I get no 'click', no lights on the small "dash", and the proofmeter/clock does not come on. The battery is good, I checked it in another...

Have made some progress with 16x30 pole shed. - Drawing of what I'm trying to build. and picture of work so far: - posts with notches and beams attached. My question is, the drawing shows a double header beam - 2 2x12's carriage bolted to post. What I have been told is that notched posts...

I have finally started work on a small (16x30) tractor & implement shed, single pitch shed roof. This will be made with post & beam construction but with round poles (they were free). My question for you all is what is the best method to attach the top plates / girts to these round poles. I...