Recent content by Phunge

Hi Have a need to transport my 3520 (tires are not filled) with the following: 300cx loader w/ 4in1 bucket 485 backhoe w/ thumb I have a flatbed trailer with tandem 3500lb axles (brakes both axles) -- will my equipment be too heavy for it? I don't have specs for my trailer, but i'm guessing...

Happened to stumble on these hydraulic tools by Stanley: Handheld Hydraulic Tools Does anyone have any experience with these? Noticed that most of them run on 7-9gpm -- would work well with a 3x20 machine?

Ran across brackets: Front 3-point hitch/mid-mount brackets (3120-3720) Anyone know anything about these? Without these, do you need to remove the quick hitch to use the mower deck?

Hello everyone, Wondering if anyone has added a hydraulic chute deflector to their 59" front snowblower? I have a manual cable chute deflector control for my 54" snowblower on my 2320, and it works great for me. My gravel drive requires quite a bit of finesse when snowblowing to avoid the...

If you order a 3x20 with electro-hydraulic 3rd SCV, you get the cool joystick with the up/down button to control the 3rd SCV: it appears that you need to first activate the 3rd SCV using a switch mounted on the right console: My question is, if you then add the diverter valve, is the...

Hello, Upgrading from a 2320 to a 3520 with the following attachments: 485 Backhoe + thumb 300cx loader + 4in1 bucket 72d deck 59" front snowblower B2060 box blade Got tired of waiting for the 270 backhoe, and have a bunch of projects (stone work) for which I need the increased capacity of...

This is the easiest way I have found to grease the dreaded 2320 driveshaft that connects the engine to the transmission. After removing 8 or 10 screws and loosening the throttle bolt, I am able to seperate the top and botton dash components enough that I can move the lower panel out of the...

My lawn is always full of leaves, corn husks and cobs from a nearby field, dried grass clippings & thatch, etc. What is the best attachment for cleaning up? Cheapie tow-behind sweeper: Swisher Products : Lawn Sweeper 3-Bag Power Flow Material Collection System: John Deere products for...

Hello all. After much reading and research, and with the kind assistance of this forum, I purchased a 2320 in 2007. I have a 62d MMM, 200CX loader, Ballast Box, 54" front blade and a spreader (used mainly for spreading sand/salt in the winter on my hilly drive) I've been mostly happy with...

Has anyone done this? I found this option on the deere site: Third selective control valve kit it says 'kit does not include a valve' -- i'm confused. What does this kit actually do?

Can't find it. My search did not turn up any links John Deere Ag - New Equipment: Technical Publications - Publications Search

In another thread in the buying section, it was said: This explains the numbering of the 260 backhoe (6 foot digging depth) for the 2305. I can't imagine it would be long before the 46 (6.5 foot digging depth) backhoe gets replaced by a 265 backhoe, with a curved boom similar to the 260, 375...

Hi Guys. I have a set of pallet forks for my 200cx loader. I was thinking about buying/building a caryall for the 3pt hitch, but then it occurred to me: Why not build an adapter that would allow me to attach the forks to my imatch hitch. Then I can use the forks on the front or the back...

I have the 54" quick hitch blade for my 2320. If I wanted to purchase the 47" snowblower, will it go on the same quick hitch? My quick-hitch has hydraulic angle, which I guess would need to be replaced with a non-angling part, and the hydraulic for the snowblower chute angle used instead? If...

So I ordered both of these heaters (coolant heater and block heater) with my tractor (2320) but I only see one plug. Did I get ripped off? What is the difference between these two? Also, how do I know if I have the high-capacity alternator I ordered? thanks.