ponytug's latest activity
-
Yes, Yanmar TF500A or Deere Hy-Gard are suitable for your machine. (y) -
ponytug replied to the thread Another mouse rant....Solar powered emergency radio? Just trying to help your cabin not be the low hanging fruit. Red pepper flakes all around the cabin...
-
Ken you take the best pictures you and Ron could be professional photographers
-
ponytug replied to the thread Another mouse rant....Talk radio left on?
-
ponytug reacted to m5040's post in the thread Main PTO-Possible to switch direction of flow and flow rate? with
Good Post.
I have a post hole auger on my tractor, when it jams I lift the auger up and it frees itself. An attachment that turns at high speed and... -
Started working a bit yesterday piling some rocks along the waters edge in a few places for some additions fish structure. These all...
-
ponytug replied to the thread Another mouse rant....All of which brings to mind the classic joke about a bear attack: "I don't have to out run the bear, I just have to out run YOU." If...
-
ponytug replied to the thread Another mouse rant....Here, keeping the hood open only invites the squirrels in. Ask me how I know...
-
ponytug replied to the thread Tires look brand new, but are 11 years old. Keep or discard?.Going from a 75R to an 80R changes the aspect ratio (tire height to width as a percentage). So the tire would be 11.25mm taller in an...
-
ponytug reacted to Shawn T. W.'s post in the thread Tires look brand new, but are 11 years old. Keep or discard? with Good Post.
Most all tires of this size have a separate rating for single or duals ... Here is mine ... At 6600 Lbs per tire in a dual set up...
-
The gray market YM1602D is very much like the domestic YM220D with the white headlamp fascia. The early YM220D machines are a little...
-
OK, after looking at all the photos, this machine is mis-marked. This a VN imported machine. The engine ID plate is exactly the same...
-
ponytug replied to the thread Main PTO-Possible to switch direction of flow and flow rate?.I did a deep dive on this, and didn't pull the trigger on it. I do have the valves and block, as the parts came with a third party...
-
ponytug reacted to m5040's post in the thread Main PTO-Possible to switch direction of flow and flow rate? with Good Post.
My experience is the PT's hyd run hot and every fitting or valve would add some restriction and more heat. What implements would need...
-
66 heading to lower 80's today. Managed to get to the "yard" maintenance yesterday. Only took water/gatorade/fuel breaks while I beat...