Recent content by Redz

Ok , I’ll dive in and see how it goes. Thanks.

In order to get the power steering control box out of there , is it necessary to remove - side panels - steering column Or, is it just necessary to remove the hydraulic lines and the 4 bolts on the steering column base? I assume the steering shaft is a splined shaft that goes into the power...

Thank you, that’s helpful. I searched for the gasket kit and it appears to be unavailable. Probably I’ll have to open the control case up and remove the O rings and carefully measure and order replacement ones from somewhere like Hercules Seals because I’m not going to find these NH...

Hi The power steering controller at the base of the steering column on our 1996 NH 2120 is leaking too much so we put it in the garage and hope to be able to repair the leak . I’ve never done this before so any advice or suggestions are welcome. I looked at it and thought… I may get lucky...

Hi Our community farm has a 6’ wide bush-hog mower that sees a lot of use. The unit is probably 15 years old at least. Recently it was noticed that a stress crack had developed in the mower deck ribs. The crack runs thru the ribs just in front of the two lower mount points of the 3-point...

These are nice 4wd tractors, with a FEL and creeper gear , they are very versatile. How much did you pay for it? How many hours on it? How did the clutch repair job go ?

I got some similar hoses but not exactly matching, at the local auto parts store. The only issue was that the lower hose interfered with the fan belt so I made an arrangement with band clamps to hold it back and a small sheet of copper to protect it should the hold back fail or loosen.

@CJFONNER , glad to help . The seal company 'Hercules' has a a very easy to use website for finding and ordering seals. If I had more time , I would have measured my seals and just ordered them individually, but its more work and time. I don't see why, if you measure carefully and look...

I used these two kits for the 7309 bucket tilt and lift cylinders on our 2120 . I didn't measure the bore carefully enough on one kit and had to exchange it for the correct one. There are several options for cylinders and seal kits on a 7309: https://www.ebay.com/itm/143422671112...

Thank you, that’s a great suggestion, I’ll remove the hoses and go see what I can match up at the parts store . Hopefully I can find something close to the needed shape.

Has anyone used those flexible radiator hoses when the perfect oem shape hose isnt available ? Do they work ok ?.

My NH 2120 (mfg date 2000) has shredded nylon on the outside of the radiator coolant hoses, this is a disaster waiting to happen. I looked on the dealer site for the parts and they are discontinued. However it almost looks like the hoses from the 1920 will fit , but Im not sure , does anyone...

I recently rebuilt the front end loader cylinders on NH 2120 with FEL 7309. The cylinder kits from the NH dealer are $175 for the bucket cyl and $299 for the lift cyl. When I spoke to the fella on the parts 'hotline' and mentioned that this was taking advantage of their customers, he assured...

That color coding makes sense, so I got the wrong part. Thanks for the info.

Could you explain why there are four colors, I noticed that in the parts catalog and just figured they were variations by different vendors or grades. Are these spiral bands the only sealing rubber parts in these couplers ? no O-rings ? Thanks.