Recent content by wendlingknives

im not creating trails, just keeping them mowed down a few times a year. They are rarely more than a foot high when i mow. There are a couple food plots 1 to 3ac in size that def get taller by the time to mow them as i usually let them go all summer until time to plant for fall deer food plot. I...

right, but still dont see a max implement weight listed that is not the lift capacity of the rear arms....but my wife says im blind

I dont see where thats listed anywhere, but my disc harrow is 1200lbs and never had any issues. Think life is rated at 3300ish for my tractor. It looks like i need to either find some bushings or a pin like my cultipacker uses. Step pin that works for cat 1 and 2

Most of mine are already about 8' wide and like to keep them there :)

Probably too big. My property is in east texas pineywoods. With a 6', i have to mow trails twice. With an 8' i think once would work. 8' prob as wide as i can run down trails without removing lots more trees. 10'maybe, but not sure. Im thinking i can get that 8', as long as the yoke width isnt...

Seems all the 8' ones ive seen are Cat 2 and since my tractor is cat 1...so not a match. Are there any good medium duty 8' 3pt shredders? Will i need to start looking at a pull behind for an 8'? I have a good heavy duty 6', but was hoping to find an 8' to save some time. I dont know that its...

I picked up this box blade and having trouble keeping the scrapers in place. When the scrapers are in place, there is about 5/8" gap behind them. The guy i bought it from had these bent pins behind it, but they really arent tight enough to take up the space, so allow the scraper to move, which...

Haa....that woulda been nice, but no such luck. Just reading the replies. Im leaning toward the mid torque honestly as it is considerably lighter and should do all i need since my air impact always has. Still not 100% sure though

Was looking at getting the M18 2962 mid torque, 650ft lb. My air impact is 750 ft lb and has always done everything i needed. Obviously, theres a part of me that says no, get the 2767 for a few dollars more that has 1400 ft lbs. It also weighs 50% more. It isnt for daily use, just fixing things...

im sure, but that means adding another set of remotes so its not in the cards for now

I just bought a HTL, so I will have that next time I use the BB. I think, from what it folks are advising, most angle blades dont have the weight to cut into the side hill and Ill be using my BB.

my box blade can tilt by adjusting the lower 3pt arms on the tractor. My thinking was that doing that, and having an angled blade would work better than just a tilted box blade. I dont know what my box blade weighs, but its a HD 6' so 5-600lbs? From what it looks like, most of the 6'...

When we had our place re-planted in pine this spring, they cut firebreaks for a controlled burn. I want to keep them as trails, but a couple are on a significant sidehill in parts. I used my box blade, with the blade tilted on one side to make them more level to drive on and keep mowed. It was...

Leaking from inside the connection. Its a pretty steady drip

One of the fittings for my front remote (for grapple) is leaking pretty decent. Checked and its screwed on tight. Only leaks when the hose for grapple is connected, so I should take that to mean theres something wrong with the fitting? Ive also seen that there are 2 types of fittings, one has a...