Search results

a PTP at 600 feet? i guess if its not LOS it might be needed. but i would think 2 of the mesh (one with wireless uplink) should be more then enough for him, if the one doesn't cut it, he didn't really specify his needs, but i doubt its much

i bought a land plane 2 months ago, full price, was 8 years old. didn't budge on the price.

short of throwing an amp meter on it, most people would be guessing. is the well new? lots of sediment?

it works, they don't always share the load equally, but there is no issue. rv guys do it all the time.

i have been installing ubiquiti for 15 years at this point prolly close to 200 units, i told you which unit to purchase for outdoor use. Do with that information what you will.

you would use the charger/ and cable from your phone to use this. it comes with a cable to charge it, you would use the charger from your s9 with it, and the usb-c cable to charge from the bank to the phone. the battery is built into the unit, that is what the Mah capacity indicates.

remember wifi is a 2 way street, just because the AP can yell that loud, does not mean the device can talk back, most don't reccomend the long range. your looking at the wrong unit for outdoors, thats a inside unit, look at...

i own multiple power banks, anker is a good brand, you will be happy. should last multiple months between charges.

lol, all you need is this, anker is a good brand, and it will last for years, if you plan on not using it much at all, leave it around 80% full to prolong the life of the battery...

i have painted my decks 15 ways to sunday, nothing lasts, i now just use a rattle can and 5 minutes.

at full load, at 100 feet (don't know internal wiring distance) its only a 5% drop or a 6v drop, you should have been just fine. measure at the outlet where the microwave is, if your above 108V you should be fine.

there is also no reason for why it stalled, was something hooked to the rear pto?

I'd be interested in hearing more..

your doing yourself a big dis service here, yellow was pretty decent, pretty graphic in some cases, but a very good show as well.

i was all about to get trimix for my first attempt with welding, the gas guy shockingly said, unless you want it to look pretty, just use regular 75/25, it will just look black. and thus i welded stainless with regular gas with 0 issue and no real change in the process, was pretty shocked to say...

I don't think its remotely scripted, he genuinely seems out of his element. that's what makes it funny, no huge drama at all. I thought the show was decent.

seems off to me, but in one of his break downs, it was 40k euro i believe

it is amazing. im watching it as well, he was always hilarious, but im shocked at his age that he wants to do it, it does seem like he puts a good amount of hours in.

its the tilt for the 3point, should be on the right side, attached to the right side 3point bar

https://www.amazon.com/Mophorn-Hydraulic-Drawing-Machine-Bearing/dp/B07DWT5LPN?crid=18W8XSWYOO1FK&dchild=1&keywords=hydraulic+jaw+puller&qid=1624491758&sprefix=hydraulic+jaw%2Caps%2C158&sr=8-5&linkCode=ll1&tag=ast45-20&linkId=2798a7c6f10767cb578ba6c2021ad2a2&language=en_US&ref_=as_li_ss_tl i...

but if you look the item is placed in the box ground down. thus 2 vs 1, ground down wins!

i think people should be shot who put ground up, i guess no one has transformers in their house. mine fall out with that stupid ground up, every outlet i see up gets rewired straight down, the only time i see cords coming out of outlets is when the outlets are worn out. i use 10 gauge extension...

why not just let the neighbor do it with the 1025r, he's prolly excited to use it

every person I talked to who installed this, said their issues vanished, if they kept it clean https://www.amazon.com/EZ-Connector-S710-Socket/dp/B00FZTR00Y?&linkCode=ll1&tag=ast45-20&linkId=f8e56148c6c76cae7bafc0cd8d212ad1&language=en_US&ref_=as_li_ss_tl

https://www.fluke.com/en-us/learn/blog/digital-multimeters/how-to-measure-duty-cycle

maybe for a complete moron, I have kept 1k machines running for close to over 20 years at this point.

go eneloop and never look back, i prolly have close to a 100...

sorry buddy, maybe someone can smuggle it in for ya

this is what i use, expensive, but once you lift it, you don't hold anything other then the fill lever, mine is on the hood. terrible design as well on mine...

agm's are more money, but don't require watering, nor needed to be vented, see if that is important to you. single battery is better if doing dual 12v, as you don't have to worry about balancing battery loads, if you wire in series 6v's then its a non issue. gc2 from sams club is considered a...

LOL Dude... he said he needed low voltage lighting. that's all he said, that tells me he's looking at some form of 12v lighting like an rv setup. he needs a solar panel and a solar controller, to charge the battery, the 12v lights will have their own buck/boost controller, or are old school and...

if your sole purpose is lighting and low voltage, you can skip an inverter. just need panels and a solar controller.

Might want to read my has haggling died tread.

pretty sure you meant 100 amp hour

I also got a class c this summer, been on it for weeks getting it ready. I was going to go lithium but I don't think it makes sense for non full time. I guess we will see

thats quite the leak

not to burst your bubble, but 8.8 is not equivalent to grade 8 sae, its equal to grade 5. 10.9 is equal to grade 8 in metric.

Considering I have never heard of a engine failure related to oil, other then lack of oil changes, do we need the BEST? I run supertech in everything for the last 20 years. 0 issue, and i sometimes use fram filters. I like living on the wild side.

I will be the odd man out, I came from plowing with an atv, and 300 feet of gravel with hills. I put a set of edge tamers on the bucket, and i can push over a foot the entire length of one drive with pretty much 0 issue. I did groove my r4 tires and that helped a lot. That said I cut my plowing...

it also won't do anything more then other oil, other then to lighten your wallet.

no curl action here, even the steering was slow to respond

my mahindra has different rpms in the gauge for mid pto and rear.

The step by step instructions from the how to video posted by FredFlintstone21 1. Turn key on but dont start. 2. With your right middle finger, press AND HOLD DOWN the display mode button. (The button in the top middle, that has little windshield wiper symbols on it). So with this button HELD...

I am watching..

Every neighbor that has a kubota, you can tell the minute it moves. I have 0 idea why their HST is that loud, it makes no sense. my Mahindra has 0 whine, except when first starting off. even my lawn mowers don't have that noise. makes no sense.

i see enlarge pin holes in your future, with a good amount of slop to make it fit.

I strongly recommend you rewrap that winch line before you use it, it does not look properly wrap, when the winches get that big, you need to tie them to a tree with some tension on them, other wise you can jam it up bad on a hard pull

I strongly recommend you buy this. I use to break bolts constantly with my impact, this has been over 80% successful if you can get the air tool in there. it provides a shock to the entire bolt and not just the head...

if its a farm truck? why not cut through the floor in the cab?

yea its an electrical, nothing to do with fuel, start at the battery and work your way back till you lose voltage.

Just buy this, I will leave it at that. I have this for both screws and sockets, i use to snap constantly because we are in rust belts. these tools i have greater then 80% success rate walking the bolts out. as long as you have the clearance to get it in there. this sends a impact down the...

I feel your going to bend that metal bar everything is welded too, my landplane has substantial re enforcement compared to that unit and mine is only 5 feet wide.

ameriquip, made all of my attachments including the mower backhoe and loader, and they won't sell parts to you, you have to go through a dealer.... mine is 15, the plate on the front seems sporadic with the naming, some say xl some say xlt, i saw a 17 with XL, so hard to say

got a bad feeling that may be inside the transmission

Yep, Learned this after the fact, that i need to remove my backhoe to use my mower. Good Stuff (not)

I have to agree, I can hear the HST on a kubota before I can see the tractor

drill holes, fill with diesel, couple bags of charcoal and a big bucket to cook it over a couple days

well i can tell ya i was messing with my glow plug connector, and the difference between 1 revolution and start vs 10 seconds and it still not starting, makes a big difference on mine

she mows 4 acres with a self propel push mower? i mowed 1.5 acres with a self propel for a couple years on hills and it was quite the work out, is there a reason your not getting some form of a rider?

my mahindra is pretty much silent.

12.6 is not low. thats practically full charge. learn how to do a voltage drop test and start at the battery

If you look up a couple posts, i created them myself in fusion 360. you might want to look at using a iphone as a 3d scanner, appears there are apps now, that will interface with a program either called blender or mixmaster which can get you a rough quality image. I'm not quite there yet

Can't you order them, these should be available. my dealer is far, and I don't go places due to covid, and it seemed like mine were pretty expensive, and they were all different sizes.

Start with Thinkercad, its very easy, and has tutorials to walk you through it, I had never used CAD in my life and was able to design something the first day

Hi Folks, lots of questions. I designed these from scratch in Fusion 360, just used a set of digital calipers. once i figure out what i wanted. the design only took about 10 minutes to make, its really a basic design. I'm very much a beginner. I just got a new pair of calipers, my old one...

pandora has a timeout timer, how would you deal with that? maybe thats a pandora free thing, why not a cheap phone tablet, with a bluetooth receiver?

again, basic level printer. I can't do nylon. PETG is where I need to be, and where I am struggling.

Its interesting, I struggled to make more then basic shapes in Thinkercad, lack of displayed dimension bothered me. within 2 days of using it, I said it wasn't going to work for me, and switched to 360, although I agree it took me 12 hours to make my first rectangle. I am now doing pretty good...

would love to know what makes it a 288 dollar relay, other then the JD name

you can generally test the coils, to see a resistance measurement. but if you try to start it in the dark with a spark test you should easily see a blue arch. if not its shot, shorted or out of alignment.

I'm 37 and already find half of this stuff too heavy.... At 80, maybe a robot can pick me out of bed and put me on the tractor

good question. i will let you know in a year. based on my reading it has chemical resistance. I guess we will see.

single wire alternators have regulators built in, they are not meant to be used with another regulator.

Yea buddy, you need to lower expectations like a lot, the material shrinks and my printer only has a resolution of .12 at its best resolution if you can get within .2 to .3mm on my machine your doing well.

This printer, uses a sd card to do actual printing, there is no required computer needed for printing, but if your planning on design with your phone or tablet, yea thats not going to work to well. I never said it was easy.

I have the Ender3 v2. I had a need for a specific RV project. but like you said now everywhere i look i see a use for it. I REALLY struggled with PETG, finally getting it under control. The above was printed in TPU, and it went flawless, which blew my mind for a non direct drive extruder setup...

I am not an engineer, but all the weight is for vertical, where this would not be a issue, get on a hill sideways with a load and you will see some side load. If you REALLY want to calm your nerves head down to the dealer, and feel the fitment on those machines, if its the same, then it is...

Good for you, my dealer is 70 miles one way. Not sure what your deal is, but you have been shitting on posts for the last couple days, don't put other people in a bad mood because you are.

Yea, I am on a couple 3d printing groups now, and most of it is nick knacks and other stuff. 99% of what i print is functional components. I am building a pulley mount for my ROPS, so can i hang ropes to control my forward and back movement while I am using the backhoe. Its ridiculous how you...

I have no idea what break even would be. Prolly 95% of what I print does not exist as a product now, so priceless? i have about 350 into the printer, not counting filament. I think entry point is honestly pretty cheap.

do you have video of the other links play, i would say that is normal, bit of a loose tolerance on the pin hole it seems, but nothing i would be concerned about. my tractor has 350 hours, almost all loader work, you should see how much my loader slides around.

Yea Don't change those either, may hit them with an air compressor if i flood them out

RalphVa, 100 in spark plugs a year????? what in the world are you buying? I haven't had to change a spark plug prolly in 20 years on any of machines. I don't know why they came up with this change spark plugs every year. you don't do it in your car, why does a small machine need it. Some of my...

your gonna need to provide a video if you really want us to have a shot figuring out whats going on. that said a tape measure is your friend if you think you tweaked the frame. Make DAMN SURE the floor your working off is level. Don't ask me about a sleepless night and a 2 inch off center floor...

I bought a 3d printer out of interest, and for a specific project. Coming to find out I have a million uses for this thing. All of my dust covers were ripped or removed from my mahindra backhoe /3pt. and they are ALL different sizes, plus some of them appear to be like 13-14 bucks a piece for...

pick the bucket off the floor, and check if play is similar across all of it. my loader has play everywhere, nothing should be tight, except pin slop, you should have some play everywhere

yea i don't agree with the weight thing at all. normal mowers have all the weight in the front on steering not on rear, i can guarantee this has more weight on the drive wheels, then any of my normal mowers. Flat ground and it doesn't move, yea sorry there is some kind of issue, this mower has...

Land Plane has no back and is designed for gravel driveways

don't they give you a chart range with your results? https://blog.amsoil.com/what-is-fuel-dilution-and-why-is-it-bad/

maybe someone can explain why 4x4 with the loader is bad if the ground is soft/slippery, i used 4x4 constantly with snow piles?

yea get back to basic's, voltage regulator's and alternator's do not prevent engines from starting. google voltage drop test, and learn how to do it, also make sure you can turn the engine over by hand and that its not locked up

did you actually shoot the hydro's with a temp gun?

honestly short of video, no one is going to really be able to tell whats going on. my non 0 turn can do 25% grades with turfs and not slip, cutting uphill. i don't think tires can be the issue on flat, i feel like something is hung up underneath. if you lift the mower deck off the ground, does...

hows the quality of cut on these? is blade tip speed higher then residential lawn mowers?

be careful adding fluid, especially if its a hst, on my mahindra, with it cold, the stick is dry, so i added some, it went way over. my book says check after its been warmed up, and shut off for a couple minutes.

if its anything like the max series, there is a spring and 2 nuts, you would need to increase tension on the nut. On my max i had to loosen it, because it was too stiff. if the tractor is new the dealer should be handling this.

guess i can take it off again and look, but its working ok now, maybe its the bouncing moving it. with the machine off it doesn't move.

I am going to ask a huge favor, do you have the air filter housing where there is a screw in the middle instead of a latch on both sides? if you do would you be willing to open it up and take pictures of both side of where the filter compresses in the housing (the clean side). I bought this...

are you talking about cruise control, or the throttle control? i have adjusted the throttle control.

I came to the realization when its 30 degree's my hst does not warm up idling.i had my tractor at 1500 for 45 minutes while trying to figure out what i was going to use to catch the oil, when i dumped it, it was cold. I drive my tractor out 30 seconds after starting, other then the engine...

I have r4 and loaded tires, i go on decent grades between 20 -25%, i have not felt tippyness at all, not sure if it helps

I appreciate this info. I reworked the creeping on my hst yesterday, and realized that it is working properly it prolly holds perfect at 95%, maybe the bouncing was causing it come up a bit. @tmcj @doneill127 @BlackOps I am going to ask a huge favor, do you have the air filter housing where...

thanks for letting me know, i googled a bunch and didn't see the comment @DavesTractor would you happen to know if there is an adjustment?

can anyone at least confirm if they can keep the pedal on the floor,and lock it and it stays?

my cruise control lock for my hst will not hold my tractor pedal down all the way to the floor, it slowly lets it backup to about 3/4 pedal, which unfortunately is not fast enough for some of the work I do. does anyone know if there is an adjustment?

i bought this after i saw the fill was on the hood. i throw it on top of the steering wheel, works pretty good, touch pricey...

Not saying I don't agree, but go buy an RV and let me know how you make out, we bought our rv new in 2000, it was 45k, then. it was at the dealer 9 times in under 600 miles...

i put the travelers in mine about 10 hours ago, it had the original fluid at 300 hours, its a bit quieter, no issues. i put t6 in the engine, but i plan to go to supertech after the next 100 hours, as i use supertech in almost everything

did it take 14 weeks for arrival? thats what they told me for a land plane this week

so I have been using a set of pallet forks (Bolt On) on my mahindra, what I find interesting, is that curl is weaker then lift, all the video i have watched the curl is suppose to be stronger, yet when picking up my land plane and some tree's i am apparently over the curl limit, but not over the...

yep, market place is a joke honestly. tree's growing through box blades for 500 dollars (600 new at TSC) Trailers are the same. I am buying it new, 20 year old, with everything broken is 500 less. not even remotely worth the time. I never thought i would go to dealers, now it seems that's the...

to continue the loss of haggling. I just bought a "new" land plane. looks like it was sitting for 2+ years, Can you move on the price at all "No" and that was it. with a 14 week lead time from most manufacture's I was thrilled to even get it, but again. 0 Haggle. EA literally told me they are...

I never finished up with this, But i Bought my 26, in my signature from a dealer 500 miles away, with a personal check on delivery. I have to be honest, Dealers are making things incredibly easier then private sales. I just bought a new car and a land plane, and never even walked inside to do...

Thanks guys, perfect for what I need. I just bought a land plane today for my mahindra, its scarily large, I hope it works well. It's yanmar branded (woods made). I hope I don't piss off the Mahindra Gods...

my issue which i didn't really think about, is all the tire damage, my yard is generally dry, but the weight of this thing is leaving decent marks, pretty sure im not going to be able to mow with it

appreciate the info, yea, i have to remove the backhoe and hook up the 3pt to lift or move the mower, thats a huge disappointment for me, plus idk how to get under it to clean the mower deck, i have a spray setup i like on my smaller mower, these belly mowers are a bit of a pain thats for sure.

Thank You. disappointing to hear the gear box has to come off.

appreciate it ty, no rush

there is a gear box, i assume there is oil/grease in it? if you have the manual it would be great

really no one has one?

did u check the levels?

I was going to make my own post, but this thread is close enough. I already knew i wanted a HST, but after using the tractor now for several hours, i think anyone in a small tractor not, mowing acre's for miles, would be absolutely nuts to buy a gear model. i move my tractor sometimes inches at...

does anyone have one of these, do you have the manual? looking for service and oil type.

voltage drop test would find it pretty quick.... also on my 26 there is a black spade disconnect, this is melting on mine prolly from bad connections, make sure the connector is making good contact if you have this design

lift the tire off the ground to release the tension on the brake

can you backup a little so i can get a reference point?

maybe you just want another of the same kind...

can also do this model for 6v if necessary https://www.amazon.com/NOCO-GENIUS10-Fully-Automatic-Temperature-Compensation/dp/B07W3QT226?&linkCode=ll1&tag=ast45-20&linkId=e698faab192edb9aec3a97f0769e1e50&language=en_US&ref_=as_li_ss_tl

i like these models lots of nice features. https://www.amazon.com/CTEK-56-353-12-Volt-Battery-Charger/dp/B000FRLO9Y?dchild=1&keywords=&qid=1616639228&sr=8-4&linkCode=ll1&tag=ast45-20&linkId=870d68d72155726e45936a1addfa295e&language=en_US&ref_=as_li_ss_tl

fast.com

no offense but if your buddy who rebuilds engines can't tell where the muffler is on a small engine, you might be better off with someone else working on your machine

if you have to add choke and then it runs smooth, that's 100% a blocked carb.

i went lock lube and air powered greaser. my hand no longer hurts, and im done in a 3rd of the time.

its important on shutdown for turbo's as they are generally oil cooled, and it helps not starve. start up, 30 seconds is good, you have oil pressure in 2.

your not going to see 5 mile transmission in hilly area's prolly less then 1 mile to be honest, these radio's to a degree are line of sight., there is a legal way and non legal way, both will require a repeater of some sort on the highest hill to get anywhere close to the 5 mile range. this...

google voltage drop test, this will show you if the wire connections are bad. you can also jump the starter bypassing the solenoid simply by clamping jumpers on the large post, not the small one, if it reliably starts doing this, its points to the solenoid

We call it MARC training. it was over 3 hours. oh my.

wait till you have to take MARC training. you will wish you could go back to only sexual harassment training

maybe logging chains are the way to go, i feel like you need a dozer more then a tractor from the photo's

I understand, I feel that myself with my wife. Independent thinking seems to be a lost art for her.

because they use a different type of valve that uses pilot valves and electric solenoids. drop the rpm to idle if you need slower control, or add a restrictor like mentioned.

Not to rub dirt in a wound here, but if you have 4 kids, they should be outside helping, unless they are like 2 (my 3 year old shovels snow, sometimes faster then my wife). shoveling doesn't hurt children

i bought edge tamers. to be honest the bucket worked so well for me this winter over the atv, i stopped looking at snow blowers for the tractor simply not needed, i plowed up to 6 inches with the bucket with very little trouble, other then traction, where i then grooved the tires and that issue...

how much was the shed total with install?

the real question is why wasn't this tested before it left the shop? Shops are terrible. I am in the middle of repairing a generator that a certified CAT dealer work on it, i removed 2 tools, 5 extra bolts and washer's, and some bolts are stripped. i know most people can't repair but man, people...

sounds like they tied in the loader valve wrong.

yes but the chart is showing a difference for the upper end, with both being 40 weight, thus the point of my post.

yea lou , they have 2 different temperatures listed, for 40 weight, that was the point of my question.

its almost never the muffler that is making the noise, people add them and they do nothing on generator's. the mechanical noise of the engine itself is just loud. 2 sheets of insulation backed plywood would prolly make a larger difference simply placed between the tractor and the house

pretty interesting. do you have docs that talk to this? this is the first i heard of this and it does make sense.

Thats funny, yes its the same generator.

yes but the hot temp rating has 2 different max ambient ratings, which makes no sense. this is out of a onan generator manual

Some one please explain to me how this chart works. why is 5w-30 only rated to 50f, but 10w-30 is rated to 80, yet 10w-40 is only good to to 80f, yet 15w-40 is good to 100? I thought the last number was its "hot temperature" so shouldn't 40w be the same regardless of the cold W number?

I was under the impression turbo's made altitude a non issue.

they also can do serious damage to people/vehicles if used improperly since they store so much energy, but they are useful I own one.

sounds more like a short to be honest. take a look at the wiring

I have a feeling there is 0 difference overall. its going to push the same levers, just allows you not to move your foot, my brother in law has a larger mahindra with the new pedal maybe i can go check it out.

where were you yesterday when i was swinging a 5 pound sledge? good idea though, i will use it next time.

there are grease fittings underneath, did u grease them, I do agree its harder then i expected, mine also doesn't return to stop immediately. I doubt the pedal will help you as its a direct link to the hst itself. has it always been hard? i bought mine used, my throttle was barely able to move...

just realize the lock n lube is a bit larger, that said I just got it, and haven't found a zerk yet it doesn't fit, that said if its not straight you will have grease coming out the sides, so i keep a manual for that, i went air for my grease gun, i only paid 40 and my stuff is always near a...

guys its done, i beat the **** out of it, buts is back to 90% better, i should have cut it off and straightened it. all you guys with your clamps, I don't know what kind of clamps your using, but a 4 ton press couldn't budge it, nor could a 24" adjustable with a 4 foot bar on it. took a 5 pound...

Ctrl + on your keyboard and make it as large as your heart desires.

i already plan to paint it, so its not a issue. I'm not comfortable reattaching it and pulling on it. I don't want to tweak the frame, to be honest im surprised the frame isn't bent, its the same thickness. some good idea's need to see whats going to work. i would love to secure it some how, i...

maybe this is better. right at 9" is where the frame is, its bent straight back on both sides.

the bottom is worse. its a crappier photo then i thought, i don't care about painting. so you think cut it out and fix it that way? i do have a press, a plasma torch, and a welder, I don't see a easy way to do it though still attached to the brush guard. whats the deal with heat? does that just...

so this is a brush guard for my tractor, it was hit at some point. i am struggling how to bend this back into place, without cutting it out of the brush bar and getting it on a flat surface and hammering/pressing it straight. any idea's before i get the torch out?

how much is your fluid replacement budget, really depends on how fast it leaks and how annoying it is. you just need to keep an eye on it

my adblocks are identical between systems, the only difference so far is win7 vs 10

blow by is an indication the rings/ cylinder walls are worn. meaning the engine could be on its last breath, if the engine starts quickly and doesn't blow blue smoke, then the engine is prolly fine and the seals are just bad from sitting. i have this issue on a backhoe that is brand new, but 5...

stuff appears to be a bit screwed up today, attachments aren't working properly

@Sigarms

there is a learning curve, when you do that, there is a insert quote near attach files, click that and it will allow you to pick which quote you want to insert, it apparently is design to quote a bunch of people in no particular order

randomly can't reply on certain computers, with no text box available.

I think hst whine noise is tractor specific, every single hst kobota i could hear it whining for miles. my mahindra HST is dead quiet, just the way i am use to it. i can drive a stick with 0 issue, i would never own one, where i wasn't going in straight lines for a long time.

I tend to go against the grain, 10 seconds in you already had full oil pressure for 9 seconds. warm up is a joke for me, at 15f, i changed the fluid in my hst/hydro, the tractor ran 45 minutes at 1500rpm and the fluid was cold when i drained it. my tractor won't even show heat on the coolant...

if all you click is new posts, you never see read posts, since they disappear so I don't get to see that fancy grey, then maybe a slight offset of white or something then

can we get some shading on these buttons? i realize on mouse over it goes blue, but a light gray or something would be great! are there plans for a dark mode?

well of course, but there is 0 way for us to know that, you really going to chance it? i was shocked that rotella diesel oil falls under jaso MA. i now run that in the gas powered honda's lol.

Yes it Does!. Thank You

thats a browser adjustment, resolution is also setting in the graphic settings window for windows, this would adjust everything though

thought u were changing the desktop resolution to make the adjustment

Try "ctrl +" in the browser and see if it can zoom back to a decent level

are you sure? do i need to log out or something or clear cookies?

must depend on screen resolution.

i agree new posts, is the only way i look at this forum and 20 is way too short. nvm figured it out

some stuff is wet clutch, thus different oil, both my honda atv and motorcycle are wet clutch machines.

not added back yet, they are working on it

if it moves in 4x4, then its not a hst issue most likely.

it was working before, doesn't seem to be anymore, although the reply button next to it does

yes there is something he is doing with a cdn that is not working properly. i show this farther up in my post

the url's are changing, after the initial positing, it appears the links get updated to a cdn-........ this is what is breaking it. "https://cdn-0.tractorbynet.com/forums/attachments/dji_0041-jpg.687983/" this is what it changes too after a couple minutes...

log out and see if you can see them. i see he is using a cdn network for pictures. trying turning off ad blockers as well. as they do initially load. wondering if they get moved at some point

try 2 on insert image.:alien:

no issue inserting on chrome:cool:

First go around since I grooved the tires, big big difference, I don't know if the snow was different, it was definitely heavier, but significantly less trouble this time, almost 0 spinning and hills i needed diff lock and had to spin my way up, i went in reverse (no diff lock at all). To those...

Guys I think the dealers are pulling the wool over our eyes.... the link below shows why metal snow plows are a waste of money. apparently these come in multiple sizes, this is a 50 inch model Snow Plowing JD with TV Box on a serious note, I hope everyone who is there is doing the best they can.

Bought it 2 weeks ago used from a dealer out of state, runs fine, how long I have 0 clue. I can't even in good conscience sell it to someone else. was the wrong filters used at some point? it appears the filter was changed as the new one (which looked slightly used) looks identical.

I am curious what the max rpm you can achieve on this unit. full throttle for me is just a hair over the mid pto line, so maybe 2600? I am just curious as i do plan to mow, but thought it would have a bit more buffer.

Hello, Picked up a loader and backhoe, i have a lot of blown over trees and tree work i need to do, i was planning to get a piranha bar, then learned about debris Forks which seems to be a much better option, I don't own enough land for a grapple. that said does anyone own both? i have a...