Search results

Hi guys, I did it, it works like a charm, I was going to do it via a cable, a switch on the grapes trailer but I went back to the original plan, remote control 433Mhz, simpler, cheaper, I live in an area where I am probably the only one in miles that uses anything on this frequency... I will...

Thank you guys, much appreciate the input.i ordered some 3 pin Deutsch pigtails, they should plug right in when I unplug the original switch, it is easily removed… I will hardwire the wire in to the trailers, we have two. Use the original switch by making a easy removing mount. I would not...

I was thinking of the parallel extension cord type of a switch, installed somewhere, I wanted to buy a Kubota switch for this, I almost fainted, 190 euros for the switch. I researched some other, those switches are pricey, cheaper way was the remote way... I was also thinking of making an...

I know it is something that would be a safety issue but everything working the fields is. Accidents happen no matter what, just as long as one is not dumb. Yes, this little Kubota has an Push turn latch button, three wires, switching the voltage from the common to ether one of the pins. I am...

He hee, Luckily I do not live in Canada/USA... to many lawsuits, regulations there.

Hello, I was wondering has anybody wired a remote on/off PTO on a Kubota tractor? During our grape harvest, when unloading grapes from the grapes trailer (auger/pump, pto driven) in to our destemmer, sometimes I am alone running it all, it would be really helpful. When the destemmer is full I...

Some more images

Hello guys, I just thought I would do a bit of an update here after a while of owning the new tractor, it has been over a year… i must say this tractor was a game changer for me. working with the smaller Kubota tractors I had worked for us but this is just so much easier and on another level...

Detoured from the build, had to make a bottle holder, :)

Hi, I had the Makita, two battery version when it just fot out, it was OK for what we used it for, pruning vineyards. It is gone now, replaced by a Husqvarna 40V, this saw is OK but the whole system from Husqvarna is junk. The batteries act up all the time, you never know when it will work and...

Thx mate, I hope I can afford greasing up my tractor, it is becoming as expensive as our politicians and bureaucracy. 😂

Hi guys, i was just wondering if anyone knows what is so special about this grease that it costs so much 100 euros per tube (Ended up buying one tube from the ads for 50 euros). The manual of my tractor, Antonio Carraro requires this grease for some of the zercs. Tech sheet link thank you

I put it all together after welding the aluminum (still learning tig welding), then realized some of the bearings on the pulleys are bad… decided to replace them all 12…getting there 😅

I’ve been busy with the ripper, grubber and the trimmer at teh same time, adopting, fixing cracks, reinforcing the structure… some photos if any interest…

Exploded :) I took it all apart, to weld the broken parts together and replace the nuts/bolts to stainless (rusty) and some ball bearings… after that, I will start building a mast/harness.

There are several variations of the Clemens Ripper (also Roll and Braun rippers), these companies dominantly make products for vineyards and orchards, very high quality but also very pricey being that they are German. The model I got is an older model, the cylinder pushes the mechanism to...

The trimmer and the ripper arrived this evening, they are not in a bad shape, I actually thought they were better than I thought they would be. I will post some photos soon.

I went to that website, the domain is for sale?

Where do you guys upload videos to share on forums? I use google photos but I am not a fan of it… video of it running at the sellers place: New video by tunin tunin Dailymotion Video Player

Hi guys, I just bought an old and abused vines trimmer for my vineyards (and a ripper style cultivator) on an auction, it should be arriving today or tomorrow. I think I did well, I paid 1000, these trimmers run 6500 euros and up to 30000 new from Ero, Freilauben, KMS, Binger… I bought...

Here is another one

they seam to be built from. 8-10mm of sheet metal not that flimsy

Hi guys, has anyone had experience with this type of spreaders for manure and compost. Looking to get one or perhaps build one to my needs. The main goal is to not have to bring the loader to the field to load up the wheeled spreader and the other thing is, the lack of space, narrow vineyards...

I just looked at your youtube chanel, kudos for this, great work.

I just realized you are in Portugal, sorry, thought you were in the US. Honestly, I had trouble with European, especially Italian dealers, very unresponsive and lethargic. That is m whu I posted about the positive experience I had with AutrUsa.

When I got mine a friend got a SRX8400 no cab version, very low otherwise similar capabilities. Here are some photo them both together and one of mine for last years harvest. I started a thread about a dealer in the US! east coast, that deserved a credit. AutrUSA

I could not find a photo of a day later but this is what it looks like right after I go through if the middle section is not pre-tilled.

The disc only cuts a grove for the blade leg to go through, the blade with the tails does the job, it cuts underneath, depth adjustable, the tails move the soil and weed. It comes quite close to the trees, the soil gets worked quite well. Let me try and find a photo from a few years ago, what it...

Thank you. Yeah, model SRH9800, hydrostatic. Very versatle, narrow, as narrow is neaded for our old Mediterranean patches of vineyards and olive orchards, very nimble ( I hope that is the Eng. word) :)

Back video Back video 2 Front video Front video 2 Front video 3 Underneath video

I finally adopted my Antonio Carraro to the Clemens under-stock hoe blade (or the other way around :)). I only bought the red part, used for 350 euros. The lift and everything else is what I mocked up. The ready and done from Clemens is crazy expensive, what I built for a 100 euros of materials...

Hi guys, well, yes, you ask it and it responds, so for instance, here is one example… I could write all day about my experiance with it… on Gender, aparantly there are more genders than 2, where I live, it is only male and female…

Yes. But this really fills the cab. i was quite impressed. I originally built a harness to use the built in speakers, the unit it self sounded better than the built in speakers, so I scratched it. Will be roto-tilling this week, will test it in action.

Hi guys, well, simple install in my Antonio Carraro tractor, I had a couple radio, bluetooth setups (pioneer, JVC, Blaupunkt) the autio was not all that good but the main problem is, they crapped out after a while, being that it is a vertical install in my tractor, the detachable face started...

https://photos.app.goo.gl/SVbXFPcFMZhkar6A9

https://photos.app.goo.gl/5ySR6z64Zu5nGaKq6

Sorry I neglected to put up the followup on this thread, here are some videos and photos of a few builds: https://photos.app.goo.gl/VsqLrY1zrf7GCDWh6 https://photos.app.goo.gl/4AnAFf4pDgVJmgk46

thank you for your response. I contacted a few other companies to get more info. Some say it is not as good as it seams other say that is the future.

Hi guys, I have been researching the electrostatic sprayers for my vineyards, olive prchards for some time now. Has anyone had any experiance with this type of sprayers? I was looking at the Turkish made Boa also talked to some people with Vicar company (being that my current Vicar sprayer is...

And some more…

Some more photos from the last years harvest. :)

Here are some random photos from the past week or so. i will post some of my regions, vineyards and olive orchards if there is interest. :)

Thank you for your kind words. God is good. honkhonk

Hi, I actually “bumped” in to them by searching the AntonioCarraro.com for companies that dea/service their tractors because I was helping a friends family in NY start up a simmilar operation I have in Medjugorje, Herzegovina (Vineyards, olive orchards, tiny vinery, olives processing). First...

Hi guys, greetings from the other side of the pond, I just wanted to post this as I believe in “give credit where credit is due”. Www.autrusa.com i had the most wonderful experience with this company, George and Jim were more than helpful even though I amnot one of their customers as they are...

I just thought this would be something we all could do. Post good and bad experiences with companies to save time and money for others. :)

Hi guys, I just wanted to write this to give a heads up to all of my fellow tractorheads out there. I purchased several products from this Slovenian manufacturer, INO BREZICE inobrezice.com, unfortunately their products are poorly designed and produced. Not one time did I use ie. the spreader...

Hi guys, an iT eng. In the agro field, we grow grapes and olives and make wine and olive oil, nothing big, about 10000 grape trees and about 1000 olive trees... I致e been messing up with the grinder, welder making different hings for our small Kubota b2410, originally we had an articulated TV...

Hi guys, a neighbor of mine just bought a small Mishi, he asked me to try and source the manuals for it, if anyone has any idea where to find the service and user manual it would be greatly appreciated. I use a Kubota and there is a great resource for those interested at kubotabooks.com Regards,