Search results

I'm on the edge of my seat!!

When I mounted an outside PTZ camera, I used a 12 ft 2x4 bolted to a 4x4 fence post with 1" angle screwed to one corner of the 2x4. Stops the swaying and the warping!

This works great! i have one...but I also paved my driveway!

Nice STRONG reminder!!! Thanks for the post!

Neal at Messick's talking about the new BX series!! *NEW* Kubota BX 8 series (BX238, BX188, BX268, BX23s) - YouTube

Here you go

This is one I made.

Here is a battery charge chart. If it reads 12 volts, it is not even at 50%

The part # of the whole assembly is K2581-62612. I can buy the bulb, nut, washer and tube guard of course an assembly, but not the lens. Hoping someone has a broken assembly with a good lens left on it. The wife decided to mow, it came off and she CHOPPED it up!!:( My wife said she was being...

Four years ago my black lab "Shadow Pup" passed away and my Bota had a job to do. Today, it was my wife's yellow lab "Daisy Girl's" time to pass on. My Bota answered that job again... WORST job, but I'm glad I have a backhoe. This was both of them at the Atlantic Ocean 7 years ago...

Heard a funny noise/rattle coming from under the hood of my BX24the other day. Opened the hood and rattle was coming from the right side and the dipstick was loose. Took it to the garage, removed the brush guard, side cover and FEL. Saw it right away, The lower alternator mount bolt was broken...

Keeping my 95 year old Mom busy! :cool2: Don't start with the ROPS comments, she has lived 95 years, most of her life WITHOUT all the safety stuff we have nowadays!! Plus, throttle low on flat ground.

Battery going dead.... Or at least half the problem!

Battery voltage low...see chart

I have used my BX hard and have 940 hours on it. Had a couple acres cleared by an excavator and the trees stacked. Pulled all the trees from the 3 piles they stacked and finished off the land and now have a pasture. A few times I bordered on abuse. I know the way some of the people on here talk...

I have a leak from the seal behind the HST fan on the cover of the transaxle on my BX24. Does anyone know if that seal can be replaced without taking off the cover??? I cannot tell by the picture I got from dmacneil's post. I believe it is seal part # 32721-35380 on page 59 of the parts manual.

I am doing the 500 hour mainenance on a friends tractor. The float does not work on the front loader. It is part of the operation of the front loader, because when I borrowed it a couple years ago, I learned about it then. Now, it is Not working. Will not go "into" the detent. I saw a post on...

Can someone scan the maintenance schedule from their owners manual and send me please? A friend of mine has a L3130 and his wife is bartering riding lessons (horse) for tractor maintenance. They cannot find the owners manual and I need to see what is due. I have done the 200 hour and 300 hour...

Well, my "Baby Bota" hit the 900 hour mark (898.4 actually) and all is well!:thumbsup: The only thing that has not been done is the front axle oil. I have the parts to change the seals and will change seals and refill with fresh gear oil soon. The funny part is that the seals have been VERY...

I put my finishing mower on and mowed the yard and pasture. Then, as I was removing the 3 point hitch to install the backhoe on, (yes, in a hurry getting dark with some push mowing to do) I stood up FAST and WHAM!!! Felt like my wife hit me with an aluminum baseball bat after catching me with...

:thumbsup:

I use mine for logs.

Some of you have seen my Mum on here using my bota before in years past. She is visiting again, last time she was here was a year and a half ago. I always ask her if she wants to drive the tractor. Usually she says yes. This time she said, "I don't know, I am shakey." I told her no one would...

Well, it's that time finally. I am at 793.5 hours and decided to do the valve clearance check this morning. Manual says to check the condition of the head cover gasket, but I ordered one and replaced it anyways. The clearance is suppose to be .005" to .007". Turned out a feeler gage .008 fit...

I walked over to close the gate and when I looked back, I snapped this picture. Deano

I knew the day would come. My best friend of over 11 1/2 years passed yesterday afternoon. Shadow Pup waited for me to get home from work. Used my tractor to lay him to rest....:( Deano

Yes, I know 1 1/2 years ago I posted my 90 year old mom on my Bota, but, here she is, almost 92!!! Asked her if she wanted to drive the tractor again, she beat me out the door!!:laughing: Deano

Last big snow we got I used the front loader. This time I had purchased a used RB60 rear blade. I then ordered skid shoes for it. I really did not want to get snow to try it out. One of those buy it and hope I did not need it for snow. But we got 14" yesterday. Wow!! what a difference!! So much...

Wow, that is pretty cool!! Is it for rent??!! Deano

I posted this in the McCormick forum also... We have an old Adams Grader with a Farmall A engine that water got into the engine through the exhaust. Can anyone tell me an approximate cost to tear down, inspect, and worse case senario overhaul the engine?? I see that overhaul kits are between...

We have an old Adams Grader with a Farmall A engine that water got into the engine through the exhaust. Can anyone tell me an approximate cost to tear down, inspect, and worse case senario overhaul the engine?? I see that overhaul kits are between $350 and $400 online. We would have a mechanic...

A word of caution for owners of tractors (BX24 and BX25 for sure) with the instrument cluster with digital tach/hour meter. I was washing my tractor (no smart comments!!:D) after heavy work in ash and dry dirt and decided to take off the screen that covers the battery and rinse out the radiator...

Does anyone know the dimensions of a Farmall Cub tractor?? Thanks, Deano

Does anyone know the dimensions of a Farmall Cub tractor?? Thanks, Deano

Does anyone know a part # for the o-ring in a 1/4 hydraulic quick disconnect coupler. I removed my loader on my BX24 and when I reconnected it, I pinched the o-ring. The parts manual shows the coupler $24.95 :( but no breakdown... Thanks, Dean

Does anyone know where I can get a thumb for this backhoe?? If not, how about someone who can fabricate one?? It is for a friend. Thanks, Dean

Any ideas if a friend of mine could find a used backhoe for a L3130?? If not, where is the best place to find a good deal on a new one?? He is located in Southern Maryland. Thanks, Deano

It has taken me a week to get up enough nerve to tell you guys this... I was working on breaking down my last pile of trees (see pictures) that the excavators made when I had some land cleared. I am using a chain to pull apart the pile and burning a small pile about every week. One pull with...

A while back I asked about tool boxes for a BX24. I finally made one today after reviewing what others have done. The following is a link to my original post. http://www.tractorbynet.com/forums/kubota-owning-operating/132288-bx24-toolbox.html Also, I attached some pictures. Thanks to all who...

My Mom is visiting for the week and I took the week off. She turned 90 years old in October. I took her everywhere I went so far this week and she has watched when I fed the horses. I cleaned the horse poop from the pasture this week and while I do that, she sits in the house and does her...

I have a new Leinbach 7300 that I would like to trade for a 7200JR or equivalant. I got it for a good price and it is too big for my BX24. I am in Maryland. Thanks, Dean

Has anyone mounted a toolbox to their BX24?? I only want to store a couple screw drivers, crescent wrench etc. to adjust top link or whatever. If you have, how about a picture and where you got the box. Thanks, Dean

Is there a bulb part for the headlights that can be purchased at Wal-Mart or local auto parts store?? Or, is the Kubota bulb the only one that will work?? Thanks, Dean

My first question...no cherry comments!! :rolleyes: (Yes, I know Kubota has had a problem with this) My BX24 with 298.3 hours (220 hours in the last 10 months) just turned to 0.0 hours on the meter!! The dash cluster was replaced by the dealer for warranty before my 2 years is up. He gave it...