Search results

Walmart Distribution is not far from me. A couple miles so Local stores are well stocked with a few options. This was on sale Hydraulic Fluid Oil - Super S 303 5 Gallon Bucket - Walmart.com I'm after the JD303.... Crazy on the different options with todays needs. I flushed it a few times and a...

My first Serv. was a tell tale again the use on my 3pt.. Pickup screen was even pinch in half and looked as though someone replaced the screen at one time. Esp. compared to the new replacement. Fredricks so it's the correct one. Copper looking weld. Huge bead ran down it. The Hyd. fluid at the...

No groves on either one of mine. Just an extremely hard seal. Micro pits was the only thing and why I left the Collar. Which I did go over with the Emory Cloth. Cleaned right up and not much Hyd. fluid loss in 10yrs. A pint or two maybe The few drips I do get if any now for some reason gets...

I had to leave the collar at the time. Mentioned it before. Replaced the seal and that's been at least 10Yrs. 1 drip or 2 and sometimes it doesn't drip at all. Show up after I park it. I see it on the Wheel it self and knowing what's causing it the Lip goes up!! Still have the new collar but...

Nice Pic.!! My 3pt. had some use on it Esp. Hieght Adj.. Shaft 2 nuts. It was broken at some point even. No doubt it was welded back on the arm. 🤨 Could of an Pole digger pulled it down to far possibly?

This setup is used all the way up to a 3000 and if you look at Hoye's Dia. YM2000 my guess is it's the same. I'm limited on part# for a 2310. You need 63-66 Control Lever. THREE_POINT_CONTROL: Yanmar Tractor Parts

That ORC. is Spring pin loaded. Mine is set by a pin you have to use a punch. PITA. not that easy to get to. That and the bolt on top link wasn't all that user friendly no doubt. I use the 2000 for a FM. so I have to use a ORC.. Used this setup for over a decade and still today. ORC. stays on...

Quit using it yrs. ago. Pic. I used on CL. when I sold it. Only ran a couple days literally. It was for My mothers garden back then. We went to the back and dug this one out. Wrong Dr shaft reflecks that. Which I kept the shortened one. And for the exact reason as for what just happened. ;)

I could just imagine what the tiller data base is like for Yanmar. Huge I'm sure....... Fredricks calls it a 5' RS1400 series.

That's the tiller I owned. Just in perfect condition. And if I needed a tiller for the YM2000 I would be looking into that model again. Worked really good. We had to dig it out of the back shop, Last one they had. Just came up what was in there. Tom's BA. Helicopter. Super cool..........

I get adds like this daily with a few different models. On FB. and local + The Big Fredricks isn't that far for my Gray Mkt. Yanmar. Big smile when I heard they was coming to Ga..🙂

Sent you a PM. On a tablet so make sure I sent it right.

It was a mistake back then that Fredricks took care of so your welcome to it. UPS it? I'm not sure were your located and what's best way to get it to you or by what carrier for that matter. Figure out what's best and how I'll be glad to send it. Had it for Yrs. and no reason to keep it.

O8 I believe. What I use to look like. I went down or hurt and lost a lot of weight in early 09. Been told it was highly unusal I survived all the injury's and it didn't do me in by my Doctor. Aneurysm started it. Couldn't remember my password and reset my Org. member on here. Gained some weight...

BTDT and shortened the shaft. Wasn't much to it. 3 cuts. 1 cut on the open side. Took about 2-3" off and that made a coupling. 6-8" off the shaft side. Used the coupling to attach the shaft side back together. Didn't take long or anything special. El-cheapo HF. stick welder and a hand grinder I...

Looking at the pic. of the Vin. Plate I see that. Short run at that time I'm sure. Yanmar was packing up headed out of Dodge so to speak. looking well built and price cought my eye. 1741 A few of them even at 741 back then.

I came up with Three. Seen these before on here Log into Facebook But never seen this model of tiller before. Interesting! Log into Facebook This one's pricey also!! Log into Facebook

RS-1400 5'. Here's the top link which there's not much to it. Used with a YM2000. I gave this pic. to another member Yrs. ago and never heard anything since. Not much to it. You can ghetto rig it but this is how Yanmar set it up. The Tiller will move out away from the wheels when lifting it...

I've seen that helicopter. Walked right next to it picking up a tiller. BA... Don't see that everyday in a shop that's for sure. He told me it was Tom's. I lived 25 miles from Aberdeen proving ground. All kinds buzzed the house daily. Shake the windows they was so low.

The YM2000A-A if I recall looks correct. It also correspones to my model & Eng ID. Which I have only seen one other time with -A. Seen 2TR20A and TR20A-X a few times But the 2TR20A-A only once and that was many Yrs. Ago. 693188

I do have the hole just below the #7 Nothing to attach a Spring or a Chk. Ball to the handle side. Maybe something with a JD. 240 or a Prod. of a later model. My YM2000 was so Org. They may have removed it. Which could be true since the paper thin PD. disintegrated and The mounting stud easily...

My double nut lock down broke off the Throttle Handle Threads. Sure did!! was able to tach. and thread it back. It took me a couple times to get the spring tention tight enough to hold the throttle from increasing the rpm's of the motor. Was just at Fredricks and didn't want have to replace my...

Mine was in rough shape also. Would not stay up running. Pickup Screen was in bad shape even. I had replace it. Play in the 3pt. Lift assembly itself was to blame also. All of my Hyd. was in bad shape. Your Power shift ,3Pt.lift is working properly there's not much more that can be wrong. Any...

This should be the same as yours. Fredrick's refurbishes the YM2500 they should have it used if not new. Not much to it. Cheap on Ebay even SPRING THROTTLE RETURN | eBay 646402 No detent ball that I recall.

Hoye and Fredricks show this one to be for a 1610. 2 Lever ? Single lever on the control. Up and down on the pin is all. Up is in and let it out Arms go down. There is a Relief setting on Mine to keep the arms going to high. At the L. side of the fender. Mine is like this one HYD VALVE There...

My Throttle linkage feell apart also. Nylon washer inside. Fredricks. FP-8220 same one as the 2500 in my parts. A 2500 from Spalding Fred. Referb. It was nice for the time I used it.

You have the HHV.451 control valve. Same as my YM2000. I had problems with it sticking and would not close all the way. Cleaned the valve up and linkage and it been working fine ever since. Way over a decade.

Int.20 to N. Hwy 431. I'm 1 Rd. 10 miles or so off Int.20. 1hr. 15min. I believe... Easy.

They're not bringing what they use to. I knew that and Dumped mine. Yrs. ago. 675.00 Fredricks in 09. hard to get the Dr. shaft and last one they had. I gladly cut all that area now with the FM. ;) It did work well with all new tines. No wheels.

A load of Kubota's 1 tractor and a few BH.'s on it just went bye. Doesn't happen as much nowdays. I'm sure steve will set me up. Or worst case go to Fredricks which is a easy drive for me. BTDT......

650.00$ Ga. CL. Farm and Garden almost always one. Been on for a few Wks. Yanmar 5 ft tiller - farm & garden - by owner - sale What he'd like to get for it. Go high on the price. Easy to come down but kind of hard to go up. @ 2wks. should tell you something.

08 My Ym2000 came from Steve @ Spalding. Then 09 a YM2500 For the property of retired catholic priests. Think he didn't give them a good deal!!..... :)

Kubota Manufacturing is big in Ga.. Not far at all from me. I live on a State Hwy. and see the truck load of units go bye. Used a Kubota Fel. BH. when I built this house. The owner just picked it up from the Dealer from Serv. Within a couple minutes it started squirting Hyd. fluid in my lap from...

https://www.tractorbynet.com/forums/attachments/1633570779310-png.715948/ First time I seen this Model. It could very well be what this PTO. shaft was for. Would not fit my YM2000 RS1400 and had to shorten it until the correct one was sent. Needs a bearing replaced. Other than that it still...

Been tilled before with the walk behind tiller. A few Yrs. and a few POS. briggs and Staton Sears walk behinds and a few With the RS1400. First turn of the Yr. 1 pass. Done Perfect. She seeded or planted the Frame Grove and raked over the loose soil. Sweet!! nothing to it.She's was in her late...

Just in the wheels and mostly just paint cracks. Lug nuts come loose again!! Been doing that for Yrs. Off the top I can't recall the size but it's not common. Standard is a MM. or so smaller. Lost two and so I Used standard Lug nuts and Bolts. They're not coming loose. I'm always moving 5th...

This Quick attach Bucket was easy to Remove or put back on. Similar or same setup. Only a couple yrs. old and JD Frontier so I beleve it should be common and easy to get parts. Repair/Replace 658971

I had wobble also on my Org. front YM2000 wheels. A lot on 1 wheel anyways. The Inside of the 2 Bearings Disintegrated. and the other one fell out in pieces. New there was a problem so wasn't really surprised. Org. tires still with some Dry rot. Foam fix a flat took care of that and Ill probly...

RS1400 on a YM2000. Fredricks with new tines. Only one they had left at the time. It was recomended I better go get it!!........ That was in 09. The pic. is a small garden of my mothers. Done with a couple HP. walk behind previously. Rock hard Ga. Red clay for soil that wasn't a problem. Sold...

AL-1235 . Fredricks #'s What I noticed was the 2210 and that reminded me that it was the 2020 that just came up and it was odd for such a smaller Alt.. You have a search down pat! I only have Two things to worry about. F-250 and the Yanmar anymore thank goodness. I'm sure someone may need...

Recalling back and checking into my Chrg. light problem there was several ways to setup these Yanmars. The Org. YM series,Rice patty tractors was hard on the Elec. Sys.. When digging in deep of my dash and Fuse panel I found out this to be true. Both VR. Old Mech. style still up in the Dash and...

Local and just a few miles from Athens and seen this. I knew it was VN. but that really doesn't bother me depending on the condition. No loader on my YM 2000. Used a JD. 5103 for Yrs. with a FEL. and know all to well it's capability's. If that one was Bigger I would have been on it. But my...

Tax is so irrelevante for me I use Rd. Have Off-Rd. 1 mile from the house but never cared for the Red Dye. Plus To lazy to walk over to the side of the building and then have to go inside to pay for it. Many Yrs. and it's a good feeling to see clean, clear fuel in the bowl. All the time for me...

Any bigger mug I'd have to put on the ROP's....... Rarely any Alcohol for me though.

Thanks!!She's another a beauty if your talking about mine. I may break down and buy a can of paint. Grn. even. Starting to look it's age for the times I do use it. I'll have a whole 15$ in it. Paint it grn. and I 'll can get big bucks for them looking new. West coast money even different grn...

That was the way I seen it also. But no extra 3pt. and I wasn't removing one for the very few times I use it. Plus I don't have to hook up the top link. Factory hole in the arm. Easy as long as your put the bolt in before you lift it. :confused: leave it there.

That one looks to have found a nice Hm............ Nice find!!

My Ranger bass boat outboard would get to my son in a wake zone. F'd him up good the first few times trying to look at the motor backing up. Knew what was happening. He was real young but honestly couldn't help not to laugh the first few times. But sure enough I had to get on him about what "not...

The Ym.2000 won't kick it up. Even tried to make do it. You may need to stick with a little garden cart to be safe. I have it lifted going through the Duel axle Brakes and Tires. See the Jack stands. Never gets close to being unlevel sitting hooked up.

Cheap may be a good thing Esp. $ wise... Here you go!! Elcheapo all the way but I'm good with it when this was all it cost me. I got plenty out of that mower blade also. Can't complain ...... ATV Hitch Adapter

Me Either about welding. Only reason I can is I had to learn to do some simple things. I done this a few yrs. back just in case which after doing it works really well. Only had to use a few times. I have large trailer I use it for if I had to. I don't want to bolt to my Rear end. So I don't...

A few of my timing lights show the fan marks. Some models of car are near impossible. Seen a few guys lift the car and take the front wheel off the front wheel drive land yachts. First of the Taurus I believe. Crazy.........

The tube is Part# AB-42280 Repl. #1941150.42280 to many models to list apparently. Fredricks has a few 1000 I'm sure.

Bad need of Serv.. It's not low Maint. but A No! Maint from the looks of the Fuel filter. New Hyd. fluid and clean everything may help a lot.

612440,658970 The Old style Overrun that I use. I remove the Grease Zert after I grease it up and put the plug I made back in to seal it back up. Done that right off the bat. Sure enough if there's a chance of it breaking I'll do it!!.............

Looking at that filter everything would get Serv.. My guess would be the Hyd. Fluid, Radiator, Anti freeze Etc.. just as bad. I believe looking at how bad the Fuel filter is there's a Screen/Filter on the Valve body of that PS.. I would check to see if it is there and clean it. Nice Find!!!

I used a o-ring around the bottom of the rubber boot. Worked for me. Mine is in better shape and not power shift causing a problem but it's worth a try. 594724

Mine won't stay up either unless I lock it. I had trouble with the linkage to the valve. So much play in it the height would move. I was able to correct that as long as the tractor is running. Which for me is very seldom do I even have to use it. YM2000 vent which appeared to be clogged by Dirt...

I have a work light that comes in real handy just in case I need to mow one over at night. It's not one of the fancy LED ones but it's Pretty bright. I was just thinking it's about time to get it out. I just seen a cat spray my tire. I'm going to hook this bad boy up!!! 602086 Trying to gay it...

The other Tractor from Spalding was a YM2500. I liked it! Fell right in size wise in between the 2000 and the JD. 5103. Wasn't or didn't care for the PTO. at all on the 2500 which I was told could be changed rather easily. Was worried with It belonging to my church and people not knowing how...

Yup!!:LOL:

I seen one of those before there Fancy!!! Makes me want go mow Over lion Imagine that.:rolleyes: 610516

I went out to look good at my old shaft and there a few ways the shop can go about repairing yours. I had to shorten and weld the Shaft itself. And able to do it with a 16th. stick. I'm sure they can weld it or fabricate something else rather easily. Only took me a couple Hrs. if that. Anything...

I have a rope connected so I can use it L/R handed with just a easy pull. And it's real easy with just a reach around to lift the handle. Either way I have it set to pull forwards or backwards. I'm tech. 1 arm and handed that's why it's hard to type. I'm sure I mentioned it before. Real short...

New CL. 225.00$ Reversible. And I don't have the first complaint!!... I've had it for Yrs. 10? possibly

Just drill a hole and pin it if you have to. May have to shorten the shaft and make the length to the level position so it at the max length Etc.. Many ways but my guess is your make that decision when you get it. The reason for the 8 spline I have was it was the wrong shaft and had to shorten...

I've had both worlds for almost a decade. Fel. and without. The JD. Quick connect bucket and it stayed off even on 35 acres Seriously. Nobody wanted it up there mowing Fact!!. The YM2000 I keep on 11 acres wooded only has a rear scoop. Works great for what I've need it for. When I built this...

I'm showing Fredricks F24 EP -2224 84mm. and EP2224A 0.25mm over Ep-2224B 0.50mm over

Ran into this awhile back. I have an 8 But I see no way of changing it But!!! Isn't this what your looking for? Spicer 2-82-58X 1310 1 3/8 X 16 Spline Yoke Shaft They may have the female side??? Worth looking into. Here is a 16 Female DRIVESHAFT - PTO YOKES - Page 3 - Drivetrain America...

I thought the fire was more interesting than the Led's............. Do the wire right up? that amazing. Well gah-lee....

That things local and real close. There's 2 Fredrick supplied dealers 30 min. from there. Been on CL. a month or so. It's not going anywhere. 750 for the steering plus shipping.🤐 One reason I jumped on my Ym2000 was the American model basically and parts avail. It was in such good condition...

Wild animals don't belong in cages. That's just wrong IMO. The kids would be tasty morsel play candy. :(

Your as bad as me on keeping things in order!! Ooops wrong thread :unsure: That's what I'm expecting to find on the filter if that..........

It was done really well but still bent up. Come to think about it someone from yrs. ago asked me for it on here. After comparing the 2 I told them to pay the shipping and welcome to it. Which they did and never heard anything more. Which to me was a good thing because if something was wrong I'd...

After seeing that thread assured me pretty much they just redone the Screen. The bead on the screen was huge and looked to be brass or copper. The replacement one looked the same as in the Pic. just new. I could have cleaned it but since I was headed that way to Fredrick's anyways and just...

I just changed my battery of 13Yrs. which is still good since I didn't kill it. Which one thing I did notice going to a 700 cca. is that if my Rpm's. get below 800 my Alt. light will flicker. Barely bump the Throttle and it stops. How I found this out is if I'm shifting a lot with the mower on...

Pretty straight forward still on a YM 2000. My dash light would flicker!! Chased that for months and finally stumbled into it. Loose bad connection on my fuse panel. More corroded than I would have thought. That was more of the problem. Still ? how I found it!!...... Drove me nuts... Here is the...

I'm inside today so just checked my Serv. manual which I'm looking at the Hyd. Sys.. No Serv. recommendation but use "John Deere Type 303" and Check and refill on the stick. In a rice patty I can see what the sludge came from which was Water. Mine White and milky no debris when I changed it. The...

My old screen looked VN. for sure. But who ever did it has done a few no doubt about that. Replaced the screen IMO. Esp. comparing it to the new one. It was bent up and a crease right in the middle so I replaced it. 800+Hrs. Since I changed it. First of this year I was only showing 1/16 on the...

Pulled it back up and took a good look at it on my last reply. And really the only reason I mentioned it was i never heard of that part being a very common problem so it maybe good . New it was rough is why I mentioned the price. Not much there. Hard parts since everything else has been BTH. and...

She's a Beauty!! This tractor may be #1 worst deal ever for a Yanmar.............. He may part it up and get 1/3 of that asking price. Then you actually look at the steering wheel and that might be doubtful. SMDH.:rolleyes:

I thought I just seen this one. Asking price will he get that ? no.... Yanmar YM1300 4X4 tractor - farm & garden - by owner - sale Ask high you can come down but it's real hard to go up!!;)

When I first bought the Ym2000 I had a Charge problem. Ended up finding out I had both Voltage Reg. old and new style. Ended up being the wiring. Bad connection to the fuse panel. After finding the loose connection I plugged up the Old VR. which is a 550 also I believe and it worked fine. So I...

Check the pressure in the Radiator with it running. Most any big chain Auto parts will rent you one cheap. I believe anything over 16psi. Been a few Yrs. since I had to check one. Pressuring it up = HG. Crack etc..........

My first dirt bike Early 70's and the reason the former owner gave it up was parts. Plus no match to the Newer bikes. I'm thinking it may have had a 360 motor. But something tells me and I recall the Cylinder was sleeved 175-250. I thought that was cool. Had to leave it up N. when we moved to...

Interesting to hear the results! This got to the best of them. Shifter on the right. Early 70's had to think hard which one been a few yrs..

I'm from WV. org. and lived on the Oh. river in Cinn. All to familiar and Had a man in WV. get killed on a side roll over. Rop. on his head and Broke his neck when it rolled sideways. Seat belt on!! couldn't get off they say. I'm all flat and a lot of Trees is why I never put them on the Org...

I've seen this pic. numerous of times. SMDH on it? I believe the mower was lifted. But in this case I'm not sure I would want ROP's. I'm bailing out the back but a side roll over is a major difference when it comes to the type of roll over to have ROP's.

Answers a few questions I had for sure. Owned this one since 2/08. Pulled the Maint. and ready for another Yr....

Has anyone had trouble logging in to TBN.? I have Dropped or lost passwords numerous times over the last couple weeks. I'll login and a few days later my password is gone. TBN. sends me a Reset new one and it's a hit or miss if it works. If I log out and try to log right back in and the password...

One thing That I see may help and Cali's right. My Ym2000 is the same 3pt. setup but no loader and I'm not there. But look over at your lift handle and make sure it's all the way forwards/Down position. And then I noticed that the spring to the 3Pt. looks to have Tension on it which is applying...

The 1700 and the 2000 use the same DS. This is my Ym2000. If you remove the Rubber Washer It's 8". Or 23 cm.

Can't recall mine ever doing that. But it never gets put under a very Heavey load. When the FM. bottoms out and that's very seldom. The reason I did notice a possible issue is my cap opens aLL the way up. "And this just came up" the neibor is learning how to use the JD. Did it cause a Problem...

I went through about same problem after buying the 2000. To Cushion my ride and actually give me some lift from the Org. springs. That would just about collapse and bottom out just sitting on it. I used PVC. Freeze plugs to Cushion it. If I recall there's a small hole in the top of the Org...

Clean it up and I found this at HF in the Bargin Ben. 15.00$ a can of Red and Blk. sure won't hurt it.

That PN matches mine and is very common on alot of models.

I use a 5' Frontier/Woods on the YM2000. and on regular cuttngs I never have to run over 2000 rpms. 1st gear PTO. I believe I Tach Out at 2800. You'll probly need to add front ballast depending on the weight of it. Esp. if you have to lift it often.

Here's a pic. of my YM2000 setup. Don't know the 3110 but maybe the same. At the bottom of the Pic. inside LH. Fender. The Shaft to the Lift Arms are Adjusted by the Locking Nuts. Which the linkage/Shaft is connected to the Control Valve. When the Lift Arms reachs the Desired Height that is were...

Yep! and boy did my Lip go up.:mad: I remember that in a Thread that came up before.

For a YM2000 & RS1400 Tiller.Your need to take the Overun clutch off or shorten it. I had no need for it with a Tiller but put it back on for my BH & FM.

I could use a Reg. top link and actually tried it so I wouldn't have to Mount the Org. link but I never had Results Like this in the Pic.. Which was the first Turn of the Yr. effortless. You coluldn't adjust it to get these results. And if I recall If I you leveled the Tiller it would hit the...

Thats right I did turn them Inwards also. After they sent me the correct drive shaft. This is the correct length of one for the 2000/240. and a RS1400.

I was told it was a must. And I can see that it's awful close to the Rears of yours. So if It hits this is what you need to keep it away.

I had the same prob. on my FM. I just turned my pins on the mower Inward and that cured that prob.and kept the arms away from the wheels. My Rs1400 Tiller are out and the chains must be tight with no slack at all so they don't hit. I thought of Rev. them inward but never had the need to and plus...

3 holes Plus 8-10" on the Right Arm on my 2000

I don't have much info on the 155 and it came to mind if it has a Serv. Stop valve ?, like my Ym2000 in the Pic.. It's the Large knob just like under the seat.The reason I ask is the PS. could be plumbed before it so it may still work. And if you do have it that would be a good reason why is...

This may help winston. Looks to be Bolts to the Gear and A Roll Pin in the #4 Spider Gear Shaft. I believe I see the Pin but the bolts ?. Oh here's the axle I believe it's just a snap ring. It may not even be close but worth giving it to you if it helps....

Not sure about the 1610 but there's a Nylon Friction Disc. in my YM2000 Throttle. You can see it in between the metal plates in the pic. Be careful when you tighten it up.I broke the Threads off mine when I first bought it and was having the same Prob. Lucky for me I was able to Weld them back...

Yeap! my seat was a little to laid back also. The bottoms are springs then I used pvc. freeze plugs for extra lift. From the looks both of our Back Heights seem to be about the same. ;) Sure made it Alot more comfortable. Mine's been like this for 5Yrs. atleast.

After being out back and looking at the property early this Yr. I decided to get a New to me Bush Hog. I use a Squeeler with the 5103 but it's not going back in there. And when I found this one IMO. Cheap I was back to get it that day. It's a BEAST!!!! and works great behind the 2000...

Those look to be for Bleeding the pump. Not Sure but on my YM2000 Pic.1 is the pump. Pic. 2 is the injectors. If your Injectors are similar First just loosen the Nuts and watch for fuel. If fuel shows up Remove An Injector and see what happens. If you have Spray a compression check is next while...

I believe this 336 Dia. should be real close to the 3110. Never the less my bet it may come in handy one day. There will be alot of options/wiring that will be the same.

None of mine are 4x4 My Old Ford Funk in WV. we've owned since the early 60's and got by. The 5103 with a FEL. is only 2wd. here in Ga. and never had a need for it yet. I can see a need for your small compact though. Winston I just had it out Look hard at the left in the pic. and your see the...