Search results

OK thanks!! it feels like it might still be attached in the corners only.

This is on the lower right hand side below the 3pt lift lever. Any idea how to get it out? I tried lightly prying from all sides but is doesn't feel like it just pops out?? Want to open it to see if the piece of my 3pt raise/lower stop is in there. I found the screw on the floor hoping the...

Thanks I will have to pull the roof off when the weather warms up and check them out. Appreciate the info!

Any one have any insight on the rear defrost not working?

Good evening, I noticed today that the rear defrost in my NX is not working. Hit the switch the red light does not come on. I checked the 20amp main fuse and the 5 amp defrost timer fuse. Both are good. Any thoughts on where to look next? Connections at the window are on and tight. I...

Hello, Does anyone have the MIE quick attach set up on their backhoe? I am looking at one for my KB2485 but wanted some real world input positive and/or negative. Does it reduce the curling force of the bucket? Looks like it would make swapping between the ripper tooth and buckets much...

Does anyone know who builds the HST's for NX series Kioti's? Are they manufactured in-house? Thanks in advance!

Here is the one I am working on for my KB2485. I have to fab up the mount when I get home again.

Good to see fellow Groomers here! I run a BR275 in the winter. Our club has 2 275's, one BR250, and just picked up a BR350 this fall(looking forward to running this one). All with Mogul Master 10' x 18' drags. They are fun to run and for me I enjoy working on them as well. Stay safe out there!

22' IronBull 14,000lb. Any shorter than 20' would have made balancing a touch harder with the backhoe attached. It was delivered on an 18' but they had the hoe swung off to the side so it would not hang off the back. I agree with the others though if you can get a bit longer you will be...

Hello All, I am working on a government project at work. Ripper tooth for my new KB2485. Unfortunately I am 600+ miles away from my tractor. In hopes that one of you may have the info I am looking for.... I found this design in a search but I do not believe it was designed for the 2485...

I have another question for the group. I am looking into purchasing a trailer to haul my new tractor with as it is not going to fit in my 14' dump. So I am looking at the Iron Bull 7 x 16 +4'(I believe but maybe 6') split tilt deck. Since I am not able to measure my tractor I was hoping...

Hello all, Has anyone found a good seat cover that fits the NX cab model seats? My new NX4510, KL6010, KB2485 w/thumb should be delivered this coming week!!! I also bought a WoodMaxx SB72 3pt snowblower with hydraulic chute and rotate. I am excited to get some seat time!

Hello, It has been a while since I have been involved with the forum. I am looking at purchasing a NX4510 HST cab unit. Trying to figure out what the better promotion is at the moment.... The free loader program or the rebate of $4300?? I have not been able to find the MSRP or selling price...

Hello, It has been a while since I have been involved with the forum. I am looking at purchasing a NX4510 HST cab unit. Trying to figure out what the better promotion is at the moment.... The free loader program or the rebate of $4300?? I have not been able to find the MSRP or selling price...

I currently have turf tires on my 7610. I am looking at getting some AGs. The manual says to use 11.2-16 on the rear. I have access to a set of 12.4-16's on rims. Will these work or are they to tall? Same size front tires 7-12 as the manual calls for. I think the 12.4-16's are on the 7800...

I am looking at ordering a Markham toothbar for my B7610 with LA352 FEL. Should I get the standard 5 tooth bar or go with the extra tooth? Any pros/cons? I am going to be using the FEL to break up some pretty compacted rocky soil and then to rip up my broken up pavement driveway. I got a...

I am looking to get 2 hydraulic quick connect fittings that will run my blower chute rotator. What size do I need to fit the connections on my 7610? I am away from the tractor so I can not measure them. Thanks for the help!

What is the capacity of the stock charging system on my 05' B7610? I see that is has a 20amp circuit for work light provisions and 30amp for the solenoid. Is this a dynamo type system or is this a standard alternator?? Thanks for the help. I could not find any info in the owners manual.

Hello, I am going to add a hydraulic chute rotator to my BX2750 front mount blower. I just purchased a NIB Char-Lynn 129-0470-002 hydraulic motor on ebay for $45.00. Will this work for my application? I have a B7610 w/LA352FEL and plan on using the bucket dump and curl functions of the FEL...

Well after looking at a couple really nice B6100's the wife said why buy something that is 26 years old..... SO today I bought a 2005 B7610 with LA352 FEL, BX 2750 front mount blower w/ quick attach I believe, and Curtis cab with electric heaters. The machine has 135 hours on it. I think that...

Hello well my journey tractor hunting is contiuing... I looked at a nice low hour B6100 with Sims cab and front mount blower the other day but the wife was like yes it is nice but it is 26 years old why don't you look for something newer!!!! I was shocked!!! Anyways I found a used 2005 B7610...

Hello everyone! I have been looking around this forum and figured I would join to get some help. I am looking at buying my first tractor. I have a chance to pick up a B6100 4x4 with 1050 hours, AG tires, 48" front mount snow blower with what looks to be hydraulic chute controls, full cab...