Search results

Correct mine as well, but if it ever get to low it will blow the trucks fuse and then the truck will not be charging it anymore.

I’m looking to charge my dump trailer battery from truck with the 7way pin & by installing a high amp kit that comes directly from trucks battery. questions- Will I be able to leave it hooked up while time trailer is connected during the day? what keeps it from back feeding if dump trailer...

Do you guys spread topsoil & gravel by dumping traveling forward or backwards? I find myself doing it while traveling forward most of the time, but I have heard your actually supposed to spread in reverse. Any input on this?

Looking to compile a list of things to check, service & maintain to keep on the machine. What痴 everyone do on a daily/weekly & monthly basis to keep there machines running top notch & to cut down on wear and tear. Can be even little things that the Manuel doesn稚 lay out. Looking to keep my...

Looking to see if anyone has a set of plans and material list for an open style pole barn that I知 planning to build for keeping equipment out of the weather. I will eventually close it in, it for now will be open or only have the sides closed. Any of these sizes would work. 22x36,22x32, 22x34...

For the ones using a Milwaukee battery powered grease gun, are you setting the dial knob to a setting to only pump a certain amount of grease at each fitting or just hitting trigger & pimping grease until you see it squeeze out between bushing etc... I guess this question could be for any...

I noticed yesterday unloading a pallet from my trailer that the right side behind my front wheel looked wet. Figured it might have been some water dripping down from loader, but after I got trailer unloaded I checked the spot and it was oil. After looking in the shop manual. It seems as it has...

What痴 every recommendation on gravel sub-base & base materials of a south eastern gravel road. Not a short driveway. I was thinking after the roadbed is rough graded add 4-6 of like railroad ballast rock grade that out, pack & add 3-4 of crush & run or a cleaned 1-2 size stone for the final top...

Looking for some good info or video on how to make water bars in a gravel road the proper way. I have a driveway repair job coming up and e customer wants them added in the driveway. I知 sure several on here have some good advice on making them. I値l be using the box blade and land plane to redo...

How do I go about designing/measuring for adding a thumb for a stump bucket? I have all the tools needed to cut/weld, it have never built a thumb/grapple. Does the pivot points need to have grease zerks? How to measure for where and what length cylinder? Where does the end of thumb need to be...

Anyone tried adding a small bubble level to the bucket or inside the skid steer to help with grading?

Looking for some good advice for grading with just a skid steer bucket. Just picked up a 95-2s for rough grading and leveling. Also will be doing some finish grading & spreading top soil with it. Anyone have some good tips and tricks to share? Played on it the weekend and it way different than...

Does anyone know the general angle to weld/attach the quick attachment plate onto the back side of a homemade attachment? I知 the process of planning out and cutting metal for couple skid steer attachments, it wandering the correct 澱ack angle the plate needs to be welded at. I see the large...

looking to see if anyone has a video or write up on using a rotary lever on a skid steer bucket or blade. Not the auto level grading attachments you can buy, but something someone has fabricated to work on there bucket or box blade. World like more info on this topic from guys using it this way...

Looking opinions on the best rotary cutter that has mulching teeth on the bottom of blade carrier for a skid steer? Will be running it on a Kubota 95-2s high flow. What brands a models are working the best? Thanks

Looking for advice on the the comparison between the ASV 75HD & Kubota 95-2s. The unit will be used for grading, Bush hogging & the occasional mulching Jobs once I buy a mulching head. I know the 95-2s has more horsepower and a little more hydraulic GPM, but the 75HD was build for mulching . Not...

Looking for advice on the the comparison between the ASV 75HD & Kubota 95-2s. The unit will be used for grading, Bush hogging & the occasional mulching Jobs once I buy a mulching head. I know the 95-2s has more horsepower and a little more hydraulic GPM, but the 75HD was build for mulching . Not...

I just purchased a John Deere 7300 vacuum system planter with 4 row units mounted onto the bar. It doesn稚 have tow markers or anything else that would need hydraulics. I have a set of rear remotes on my Massey Ferguson 2706e. It痴 a closed system & I have been told it has to be an open system to...

Looking for advice on starting a new lawn by seed this time of year at a new construction home. Already graded and spread good quality top soil. What seed or seed mixes can I plant now & will grow this time of year? needing something that will come up green now even if it dies off, it still...

Anyone pulling an offset disc harrow (pull type or 3pt hitch style) with a newer Massey Ferguson 2706E (60hp) 4x4 with front end loader? Or any Massey tractor that would be comparable to what I have? Looking at buying an offset for helping with primarily tillage on food plots & wandering how it...

Can anyone ID the drop spreader in the pictures? I know it痴 green and yellow, but not so sure it痴 a John Deere. Would like to find out so, I could try and find a manual for it. Thanks

I have a Massey 2706E with around 90 hours on it. I had a yellow/Orangish warning light come on twice now. The light is on the right hand side of the ROM gauge lower light. I can stop **** off and then re start and it will stay off for awhile. I purchased a shop manual for it, but only thing I...

Anyone own a tar river grain drill that could provide some feedback or possibly a video of it in operation?

Anyone on here own a VMC Grain Drill? The SD74 model? Looking at maybe purchasing one, but would like to hear some reviews on them from guys that own them. Haven稚 seen any reviews for them online anywhere. Thanks

I知 looking to run a few skid steer implements from the front end loader of my tractor. I do have rear remotes, but there not designed to run this type of equipment. So, does anyone have plans for a 3 point hitch PTO driven Hydraulic Power Pack/unit. Building it I can do that痴 the simple part...

Anyone have plans or specs with details on how they built there Tractor 3 point hitch PTO driven Hydraulic power unit? I have rear remotes and building a front end loader mounted brush hog. Was going to use the rear remotes, but instead now I知 wanting to build a hydraulic power unit to assist it...

Trying to find out what痴 a good fair price on this disc that a buddy has & willing to sell me. It痴 a 20 blade 20 disc 7 wide box tubing. Was one of the last that Leinbach Line made. Only used about 10 times since new. Thanks

What痴 a Leinbach Line 7 disc harrow worth? It痴 a 20 blade 20 model. Only used about 10 times from purchasing. Box tubing heavy duty model 300w I think. Thanks

Looking to convert an older 3 point hitch 5 rotary cutter to quick attach & use my rear hydraulic remotes to run it on the front end loader. I already have all the parts for converting the 3 point to quick attach. Needing help figuring out the correct hydraulic motor to use. I値l be keeping the...

Anyone ever simply attached a laser receiver to there tractor front end loader or box blade and some rough grading for pads and roads? Something that could be bought from Lowe痴 or similar & not used gauge wheels on the loader bucket or box blade? Looking for ideas. Have found a few that have...

Any good videos on cutting in or building a new dirt road/driveway with a boxblade & frontend loader?

What痴 the best used tracked skid steer/CTL for someone that痴 very experienced on tractor work, but looking to add a skid steer to the Arsenal & only played on a couple here and there. Will best used for grading yards, driveways and pushing dirt. Also, looking to use it for mulching later on down...

Looking into to purchasing a Quick Hitch for my Massey Ferguson 2706e the tractor has category 2 lift arms and top link. Mostly all my implements are newer & are category 2 or accepts cat1/2. Only thing I知 seeing is the height between the lower Lynch pins and top link pin. What痴 the best quick...

Does anyone else have an 2705 or 2706E? Wandering if your 3 point lift arms are like mine. I know it痴 a gravity system, but when I知 the up position normally on all other tractors I have owed or been around. When you lower the arms without any attachement hooked up the arms will lower them selfs...

Looking for Allis Chalmers Rear Mounted Drill Planter Parts. Please let me know what you have must be able to ship to me or local pick up in North Carolina. Thanks

Looking for Allis Chalmers Rear Mounted Drill Planter Parts. Please let me know what you have must be able to ship to me or local pick up in North Carolina. Thanks