Search results

Yeah, about what I am currently doing too. In my case, mold is not an issue (the Texas sun pretty much bakes this off). Of course, for me, a difficult task is removing the rock to be cleaned without damage to the fabric. But, that's what I get for doing this ! Have a lot of dirt / dust in mine...

After a few years of continuous weeding, I decided to create a buffer zone around my entire house. These "flower beds" extend 8-10' all the way around. I chose to use landscape cloth and top this with "small" washed rock. The rocks are say 3" down to .5" washed gravel that I can get locally. The...

I typically use Diesel Kleen (aka, Power Service) or Sea Foam. Both available locally at Walmart. Best ? Needed ? I am not a chemist, mechanic or pretend to know any details. I have (2) engine mechanic friends who have both told me it's a good idea to keep stabilizer / treatment in my fuel. My...

Nutcracker, First let me say I claim no expertise here, others have given some good advice. Keeping deer out is beyond my experiences - I have only done electric fence for cattle at times. By my standards, this is a small fence run. IF and only IF, you are also trying to keep other animals out...

Just bought a Hustler Fastrak. I have owned a Gravely before, been a long time ago. My research into ZTR mowers was confusing. There seems to be 100's of machines out there. All I can say is, I have not heard good things about a Cub. BUT, ... ? My small engine mechanic said Scag or Hustler with...

It is NOT a dumb question. At least for ME, there are limited places to get "Farm (red) Diesel". I stopped bothering with it ! The place I was dealing with requires you to present and keep updated your AG card (from the State, Texas) AND is "out of the way". I used to do a lot of business at...

Wow, that is a good question. I think most are junk *compared* to a few years ago. Recently purchased "Die Hard" (2) for my tractor because that is what they had in stock. Normally, look for Interstate - ONLY because in the past I had good luck with them. Today, who knows ? I am often perplexed...

Recently bought the DeWalt 20V because I have numerous tools for this line. No complaints so far, IF you only expect to do "light work". It will easily cut what I need to do with it. Have cut a 5" tree / limb without issues. I have not cut enough to run the battery down. So I cannot comment on...

https://www.kakugeen.com/CountyLine-10-Bushel-ATV-Manure-Spreader-MS1002-p8403901.html?msclkid=75e3623b3df91cf1eb24005b6777bb1f Maybe ?

Hired a company called Miracle Method to spray old laminate countertops and a fiberglass tub. Home is approaching 30 years old. The original kitchen counters were old style laminate. Looked into replacing with quartz or another stone product but too expensive. The tub was stained over the years...

3Ts, I have ordered Termador off Amazon previously. Assume that is still "no license required".

Wow. Well I must say that I do not have any access to or know of anyone having a 3d printer. Perhaps a good idea to find a product with or and different tube spout ? But, all the caulk tube products I am familiar with are too stiff to believe you could just squirt on and be certain it completely...

Good Question. I am looking to do this also. On a small portable shed, I purchased a tube of sealant that claimed was good for exposed metal. That seemed to work on a couple of leaky screws. However, I would NOT use the same product on my pole barn / shop metal roof ! The reason being, once up...

I could not agree more about hiring a local company. Unless, and even if you do purchase a kit, few consider all the time associated with completing this type of project. It's not like a do-it-yourselfer cannot do it, but this can be troublesome unless you are very experienced and or have...

My thoughts are: Jeff knows infinitely more about tractors that I do ! So, all of his questions are relative to the discussion. Among them ,and dear to me, would be finding the closest dealer / repair. Parts and service will be very important ! I have zero recommendation on the "manufacturer"...

>> Bottom line is in your budget, but buy once, cry once, be happy for long time Absolutely - my thought process too. I *believe* both the Hobart 210 and the Everlast I-MIG 200 would work for me. That I can tell, both are 110v/220 V machines, and both come with what you need for "gas" should...

Eric, Thanks very much ! That was a great summary !! I am still leaning hard to get the Everlast i-200 MiG machine instead of keeping the Miller Thunderbolt and buying a separate MiG. While I can see a big advantage to having 2 machines (wrt setup), my shop area is very small. I have a...

Yep, have a good Miller auto-darkening hood. I think I need some magnification. Need to revisit the "darkness" dial operation on it, perhaps it is set incorrectly ?

Ok, thanks Mark. I *really* was not certain, no offense intended here. Last exposure I had to "advertiser / distributor" was years gone by... and it was not good. Will contact you when I get to the point of a purchase. Thanks !

I have heard about the magnifying lens. Have you used ? Curious to know what the focal length is ? If it helps at say a 18" or so distance, this would help greatly - for me.

Roustabout. I know you are RIGHT ! I actually may end up doing just that - keep the Miller Stick and practice more. For a lot of my "known projects" which, are arbors / fence sections, I may try brazing ? Do not know a lot about this process either. I have "real" troubles with Stick however...

Understand completely. Most is dry. There are a few liquids at Home Depot. For me at least, I think the dry is better for fertilizer ? I have used the Medina liquid and it seemed to work well, but some of the higher nitrogen liquids (assuming you wait per instructions) was troublesome for me. In...

Chuck, I see several liquid feeds on the Home Depot website... just for a starters. Of course, I bet you know, unless your tow-behind is capable of spraying it, it can damage the sprayer. Some say you can do it if you clean well, but some liquid feed is pretty caustic ?

Mark, Thanks for answering my questions. As previously mentioned, my step #1 is to sell my current Miller Stick. Forgive the question, but I now see your @Everlast "advertiser". So, you are a distributor for them ? Dah, I am not clear how this all works - why would I order thru you vs...

A tough question for me also ! " I’m leaning towards spreader then using 2gallon sprayer for any spot treatments". This is exactly what I did (and 2.5 acre yard also). In my case I ended up with a close-out craftsman spreader. Only holds about 40lbs, but I have an old Gator to pull it with...

DL, Thanks for the suggestion. This seems a capable model, but well beyond my price range. The link (Hobart) was $1340. The Everlast i-Mig 200 is (at Everlast) $719. That one is the high end of the budget and will be greater than my needs.... I hope. The Hobart is impressive.

MANY MANY things are a PITA when it comes to "auto pay" or "auto renew". I don't even sign up for magazines anymore ! Too many have the auto renew clause and NEVER do I signup with a credit card - EVER. Have a couple utilities on auto-pay but otherwise... NO NO NO. :)

Mis-understanding here. I have 8' extension leads = extra length from the ones that came with the machine. Do not recall what the Miller had, but they were too short out of the box, so purchased extra length.

Thank-you for all who commented. Now I am totally confused. First, I admit, I HAVE NOT DONE MY RESEARCH. The reason I ask for opinions is so I do not have to read through all the mostly advertisements mumbo-jumbo and try to understand. Personally, when I read something such as a "feature" stated...

Interesting. It is difficult for ME to determine ? Why does the Everlast machine weigh 26.5 lbs vs. 68 lbs ? I do not know anyone who has an Everlast machine. Is the 200E gas ready, as is ? I put in my Zip code.... closest dealer said 380 Swift Ave STE 12, South San Francisco CA a tad far to...

Same here - DISH. DirecTV, owned by AT&T .... fired them and regret ever signing up with them. Have AT&T cell phone coverage - wish I did not ! My experiences with ATT have been poor to say the least. They constantly change prices and will take you for every cent they can. My DISH satellite...

From what I understand, (which, I do not claim is much), taxes do not necessarily have anything to do with adverse possession. The taxes are paid based on a survey that takes place when the land is sold. A fence may be put up afterwards and not effect how much land you are taxed on. Years...

Agreed, I think this only applies when / if a fence is placed on the property line or close to it. How and when exactly adverse possession could kick-in is somewhat of a mystery to me. But, I had a friend who allowed a neighbor a small pass-thru to get to a section of "land locked" land they...

I would make certain to build "on my property line". In Texas, after "n amount of time", your neighbor can claim ownership. See link below. Also, many states have laws that allow a person who uses another's land for a long enough time to gain a legal right to use the land. In some cases, they...

I watched this previously ! Good video.

Thanks MossRoad. As funny as this may sound: "It's also nice to be able to take it to a friend's house and not worry if they'll have 220V outlets", I almost WANT a 220V so that all my wife's multiple member family doesn't find out I could come to their house and weld / fix something !!!!! They...

LOL, I understand. I should have explained more I guess. I have used a wire Mig without gas. Not much, but I understand "some" of the issues. :) No way, ALL the issues since I am a novice. o_O:unsure: This is "more or less, really a hobby" for me - one of TOO many hobbies.

I understand about gasless wire difficulties. And, I very well might consider even purchasing a bottle - I would weld in my shop, so would not (hopefully) need any screens. I know ZERO about the "type" of gases, or costs, or if you owned a bottle would someone refill it - heard stories this may...

I am a complete NOVICE welder. I purchased (at friends recommendation) a Miller Thunderbolt 225 AC / DC several years ago, and still own this machine. Over time, have discovered that most everything I weld is "thinner" metal. What I would like to do is sell the Stick welder and purchase a...

The trees "look" fairly small diameter. A D4-D6 would do that easy. Two inputs from me are: The larger the dozer, the less time. With 30 acres... I'd see about a D6. I would not rent anything ! Have the dozer person bring the rake and pile them up for you. A good operator would get most of the...

Has anyone used the wedge lock system ? Considering to try, but interested if anyone else has used. Unclear to me if you can stretch barbed wire to these corners and how sturdy / how it would hold.

Agree COMPLETELY ! Amazon Prime works for me. Aside from saving on shipping if you order a lot through them (which I do), and saving TIME, and WEAR and TEAR on vehicle (my closest stores are 15 -20 miles) and FUEL COST, I can find what I want. So many places here, ACE / Home Depot / Farm...

Thanks Peter. I cannot see any possible solution with Culverts. Just too much water. I am in planning on another area that a culvert would work (so long as we dont get a 10" rain). Just priced a 36"x 16' = 1306.50. Once I add getting rip-rap to guard it, and add price for backhoe install and...

YES ! That it is A LOT of water and is why I wrote in to this forum. Just wanted to check if I was missing out on a solution. I **think** if I could pour a ground level 10' wide strip of concrete across perpendicular , and be sure to not block the water to cause any further washout, it would...

I UNDERSTAND ! I buy AMDRO ant BAIT and use. Right now, in Texas is a great time to feed them. They get active but don't have a lot of other bugs to eat. I find the best price I can, think right NOW, 2 lbs best price is at Tractor Supply ? I hate even buying a 2 LB container though. I find that...

Anywhere close by here, busted concrete is like asking for gold ! EVERYONE wants it, and now they recycle / process it for the county. Just not enough to go around, actually not a lot of concrete anything around here except house slabs - where I live. That would be ideal to get some bigger slabs...

Well, it is not a "stream" per say. I have (2) bad spots. One I am working on now. This is an overflow from a 2 acre pond. The pond was built by damming up a ravine. So, when the water overflows, there is a small semi-flat area, then down a slope. The semi-flat area has always been too narrow of...

3Ts, I thought about something just like that. Would be quite a job to install, but might work. The "only" issue "could" be driving my tractor / truck across it might mess it up ? The soils here are.... crap when wet. But, using something like that would seem to be the best option. Thanks

STIHL ! With the Easy Start !

I have a couple of slopes that water, will at times, run across. Unfortunately, the cattle need to get thru these same areas. Been asking around to see what types of material one might use on the ground (if anything) so they will not carve a cattle trail thru this area. Concrete is out of the...

I have some experience with your project. However, my initial disclaimer is " I am not an expert" . :) The first thing that jumped out for me is your question: "Should the pvc pipe be solid or perforated?" I would absolutely NOT use perforated pipe. As the water flows thru, especially when it...

I have had success with several types of traps (snap (peanut butter & bread) and the sticky traps (only for small mice)). In my shop, I use the electronic traps such as the "rat zapper" type. Throw a few grains of corn in the back and turn it on. The only issue is sometimes the trap is triggered...

Good question about the hummingbird feeders. We have yellowjackets also of course. So far *this* year, not an issue. I can say, I used to have a few hummingbird feeders and bird feeders. Removed ALL of them. The bird feeders here were a big problem. Not only did some birds kick out seeds to get...

Central Texas - Hard to put them in priority: Most are beneficial to some degree, but NOT around my house/yard As of yesterday, I will move copperheads to the top. My hand was 6" from it's head before I saw it. - Armadillo's - yes they eat grubs and other bugs, but very destructive to yard -...

My 2 cents again: You mentioned the french drains around the house. I would be a little weary of routing the gutters into them myself depending on how you built them. I had an issue at my house although not the ground slope you have. I ended up using 4" pvc to drain water a ways from the house -...

Jeff, Sorry, did not notice the attached thread. Still curious, the picture looks like in sandy soil. Have you tried in heavier clay type soils ?

Thanks Jeff, I was looking for something to dig with. No large areas, but more for say planting a tree / minor landscaping / that sort. Really, just getting a hole started is the usually the hardest part. Do you have a bucket spade too ? Wondering how well this might dig. Don't want to mess...

Thanks, This looks like a good one. I was trying to determine if anyone had one that did not require drilling your bucket. Such as, Tractor Bucket Toothbar This one "looks" okay but .... I do not want to purchase and then find out it is not worth it / doesn't work well.

That appears not to be a clamp on ? See bolts thru the sides of bucket ?

Considering a purchase. Anyone recommend a manufacturer / brand ?

WOW, this is way beyond my pay grade to even suggest a solution. But, my 2 cents is, whatever you do pay serious (very serious) attention to water / erosion issues - especially from the house roof. It appears runoff will have to cross the parking / driveway area ?

Looking for multi-task implements too. The only option I have found (for light duty, not serious farming) is getting a tool bar. With this, you could have several different types of attachments. I have inherited a 2" diamond (solid bar) one with a single plow. I have not bought the clamps that...

I bought the Dewalt (20v) greaser. Put a zerk clamp-on connector on the hose. It clears "most" of my Zerks and gets grease in.... not all however. But, the manual guns were giving me fits especially when I was standing on the tires, doing the front-end loader zerks.

I had the same issue mowing Bahia grass - tall tough stalks. Two things I did to resolve this (for the most part). First, I go a set of Gator blades. They do much better lifting / cutting tough stems. Secondly, maybe more important for the longer term, find out what type of grass plant is there...

I did try Pat's. Did not work for me. I had to use all the spacer blocks and the ends of my lower 3-point are angled. I got them on, but they just did not work very well for me. A good concept but..... gave them to a friend.

Yes, I checked the sway blocks. They are set for Cat 1. You can flip them and re-bolt for Cat2. Should be easy except the mud dobbers build nests in the holes which you have to clean out to get the bolts in.

I am (trying) to post a couple of pictures of my 3-point. I am "always" able to get things hooked up. Just the old man (me) is wondering if this could be made easier. :) I did buy a Quick Connect for me front end loader. It helped tremendously with changing out my bucket with a hay spear...

Wow, I am somewhat baffled by this ? For me, the issue is, (Cat2/Cat1 tractor) the lower arms Minimum spread is too small. That is, when I put one side on, the other sides arm will hit the (cat1/cat2) blocks... and unless I shove the implement over, the other arm will not go on all the way. If I...

I thought I would followup on this ? Identified a "new to me" herbicide. Target 6. It is NOT rated for pastures. Does a great job on Bahia and many other "grass weeds" (sand spurs, Dallas grass...) in the yard. It can set back your yard grass some, depending on what Variety you have...

For the same reason we can not have a uniform election process WITH an ID .....whatever reason that is. Understand the States SHOULD be able to make certain laws, but good grief.

Hi Jeff, thanks for the reply. I am not sure how to change the sway bar setting ? If I understand (doubtful for me), the only "setting" I have is for the "cat1 /2" Blocks you flip on the frame ? There is no bar going across from side to side. I have a bungie cord from one arm to the other to...

I had purchased these last year. Ended up giving them away. The tips on my lower arms are "curved/angled" slightly and the Pat's just DID NOT fasten up good - good enough that I would trust them. I had to use all the shims that come with the kit, even so, they did not align very well. But...

That's what I was afraid of... that is, the solution is a quick hitch. :( I am uncertain if I get one, how / if it will effect the shafts on my seeder or post hole digger ? Maybe would be okay ? Does anyone have a recommendation for a quick hitch ? The bottom pins on my tractor are Cat2, but...

JD2355 Cat 1 and Cat2. Having a lot of issues getting equipment connected to the 3-point. I have the sway blocks set for Cat 1, but when I go to hook up (3-point sprayer for example), if I do not position the tractor exactly right, I cannot get both lower pins on because one arm will hit the...

My boat mechanic said the "blue" stabilizer from StarBright is best for my 2-cycle engine. On everything else, (gator,Tractor, mower...) I use Sea Foam. I am not a chemist, so I cannot say what ingredients are the best in what percentage, but many people I know use this for Gas/Diesel fuel. Many...

I have been watching several ZTR mower threads. In the market to upgrade prior to retirement. Currently have a JD Z425 that is still working fine, but have had for a long time. The whole process of choosing an upgrade or a new purchase is very difficult ! I guess like all equipment, everyone has...

Cimarron or MSMA. A couple times a year I walk around (2 acres) the yard. Here, the "lighter green" grass is easy to see if short, otherwise of course, the bahia grass seed heads are easy to see - 5 minutes after mowing they are 3' tall. :)

I hate Bahia in my yard. Have been spraying it; which is saving me a lot of time mowing. That, and getting a set of Gator blades.

I think you are absolutely correct - can't go wrong with 10-20 competitors. I spent some time attempting to find enough difference to choose.... hardly possible to determine. My needs may not match others, and the amount I want to spend does not justify a diesel engine, a Walker (starts at 10K)...

UGH. You have to look at EVERYTHING from EVERY angle these days. Quite maddening !!

I am in the exact same position to update my mower. Suggestions / Opinions ? Years ago, I had switched from a garden tractor to a ZTR. I will NEVER go back. The ZTR is way more comfortable to mow with. It cut my mowing time significantly. So ZTR is the way to go especially if there are any...

Thanks, I know you have limited hours so far, but once *minor* concern I had about this model is the 2.8 gallon tank ? I think it would be sufficient ? I have a 3.5 gal tank and need one fill to fully mow everything. Hard to say if this is a limitation I should pay attention to... not a big deal...

Understand about planting grass. Here in Central Texas, I cannot EVER consider planting seed. Usually NO rain, and IF rain, Floods. Or, worse, .01" per day to sprout seeds then nothing.

I have been looking at Gravely - same size. Can you tell which model number you bought ?

I generally agree with your assessment. However, it would be interesting to note if Big Box stores can sell the same equipment cheaper *because* they sell more units or, because the unit they sell has "cheaper" components ? It has been many years ago, but a refrigerator (whirpool I think) I...

I am in the market for the same size machine. For me, this is a tough choice. I am unclear if the ZTR's you find at Home Depot / Lowe's are the SAME machine you can purchase at a "dealer" ? When I bought my JD ZTR425 (10+ years ago), there were many visible differences, so I ended up purchasing...

Thanks, that makes more sense. Although, I cannot tell if I can use this replacement part ?

I have an old Turbo Spin 3 point seeder / spreader. Having issues that I am not certain about and could use some advise. Just put out fertilizer (bagged) the other day. I tried to set the gate and drive speed for 100 LB / AC. The gate opening numbers are worn off, so I had to guess the setting...

I have a 2" SOLID diamond configuration tool bar. Trying to find the brackets / connectors for this size. Ultimately, want to "plug-in" some coulters. The only source I have seen for solid ones, the type that are shaped, without U-Bolts, is from Lorenzo. However, their number seems to be...

Oh boy, You hit the nail on the head ! The ENTIRE purpose of my original post was exactly what you mentioned = the cast iron pumps were giving me fits. I could NOT ever keep the pump from rusting / corrosion to the point of failure. One reason was the inability to COMPLETELY drain / flush the...

Hypro 7560XL (8 roller). Not sure what you mean by disposable ?

LOL, Yes, I did ! Was just showing the connections for the pump in / pump out.

For anyone interested: After advice in the forums and a few calls, I purchased Camlock fittings for the 3-point sprayer. Makes the hookup and clean up a breeze compared to without them. I can now easily fill the pump with RV anitfreeze when done and store by itself. Just sharing

I mix remedy with oil ( I use some veg oil) in a Jar, Then apply with a paint brush after cutting. Of course, depends on how many since this is very manual...

I have a FEL and am finding the need to carry tools along with me, shovels / rakes, chain saw, barbed wire, posts.... Any thoughts on a good 3-point carry-all ? J.

So far, my summary: Thanks to all, this has been really helpful / educational. Machine / Equipment: Still targeting the Hobart 210 MVP. The Miller 211 appears to have dial type settings instead of fixed and *perhaps* therefore, offers more simple setup / controls However, I am not certain...

Rut, You may have already chosen a machine by now ? FWIW, I have had a JD Z425 for about 10 years. I purchased mine at a JD Dealer after noting the differences between the same model at "big box" stores. They box stores are really clever at hiding swapped components on the "same" products. I...

Chim, I need to sell the Stick to afford the Mig. I really do not weld very much now (retirement is looming...) but hope to have the time later. To prove to you how little I actually KNOW / WELD, I have zero idea what a knurled drive roller is ! :) Also, I am NOT aware (yet) of the...

Thank-you for your kind replies. Hobart was on my list. After re-reading some reviews, I think the Hobart 210 MVP is my choice ! I need to get my current Stick unit sold to fund the new purchase. Having the "multi-voltage" capability is one of those " wish I would have gotten that unit" things...

Frank, I got SO tired of this.... I bought the dewalt 20V grease gun (have a lot of dewalt 20v tools anyway) AND then the lockNlube attachment. I know its $$ but.... couldnt figure out a better way. If I did not already have the DeWalt tools, I think I would have replaced ALL the Zerk...

I am in the market for a MIG (wire feed) machine. Have been looking at (seems like) 100's of models, but having trouble with a selection. My basic requirements are up to 1/4" steel; however, 95% of my projects are geared toward "garden / home" projects using tubing / thin wall metal. I would...

I checked into the Camlock fittings by making a call to Wylie (in Waco, Tx) where my rig was made. Interestingly the guy who answered said "oh, we use Camlock on a lot of our equipment". They have an extensive online catalog with more fittings / parts than you can imagine. I had to walk thru...

I checked into the Camlock fittings by making a call to Wylie (in Waco, Tx) where my rig was made. Interestingly the guy who answered said "oh, we use Camlock on a lot of our equipment". They have an extensive online catalog with more fittings / parts than you can imagine. I had to walk thru...

Interesting on the Canola Oil ! Hmmm, I was concerned about using some product that I had to spray out on the field / driveway.

Re-posting this thread as time nears to use and drain sprayer. Can someone elaborate more on these connectors or give me a better idea ? I am confused about the camlock / schrader value suggestions ? I have PLASTIC fittings on the inlet / outlet of the pump with "barbed" fittings for the hoses...

I am trying to understand what tool bar I should get. A tool bar (to me) includes the bar and the "3-point" "frame". What I am trying to understand is: - is there a "standard" or rather, a "common" size for the tool bar ? I see various sizes 2", 2.5".... on and on - also, even in the same size...

I would like to have some attachment to break up the top hard pan soil. What I am imagining (but, I do not know if something like this exists) is a set of knives / chisels ? I sold my 5 shank renovator some years ago. It was difficult to use for me (55 hp), the moisture level had to be perfect...

:confused2: I just purchased a Wiley 100 Gal 3-point sprayer with a Hypro Silver (8-roller) Series pump. The reason for my concern is I previously owned a sprayer (tow behind) with a Hypro blue pump and had all kind of issues. I only spray about 2-3 times / year, so the sprayer sat most of the...

I was wondering if anyone sells a combination disk, renovator, planter unit. I had a renovator, which I sold a few years back. I believe it was a Hay King model (5 shank). I routinely had to raise (2) shanks to use since my tractor was only 55 HP and had trouble with 5 shanks. The reason I am...