Search results

Was wondering if anyone might know what would cause my buddies 5610 to come out of forth while in high range? Pretty sure he has the 8x2 crash box. Not sure if it does it in low. Any help would be greatly appreciated.

I have the original factory quick connects on my 3910 and was wondering what couplers to use? Any help would be greatly appreciated.

Trying to help a buddy out that's trying to fix the PTO on his 2360 he recently bought. He says the PTO didn't work and looks like the slip gear was put in backwards. Does anyone have a copy of the service manual or parts diagram? Appreciate any help! Justin

Looking for advice on a good 3 point cultipacker to purchase. Thinking of making my own too, as I Tig/mig weld and do some machining at work. Looks like the local Agri has the parts to build one, just looking for a design to replicate if I end up going that route. Thanks!

Need a disc for planting small experimental food plots for my sheep and deer. Neighbor wants $300 for this. Looks to be in good shape. I think it's a 7'. I know weight is the key to a nice disc, hence the segmented wheels because it's light. Was just thinking it would still be handy for...

Looking at purchasing a 6610 that needs #4 re-sleeved due to hole. Trying to get a quote from my buddy now who owns a machine shop. Owner says it has dual power, but not sure what else. Was wondering if anyone could decode the tag for me. Also, what would your opinion be on re-sleeving...

Just picked up this RB850-4 ($1000) and trying to get her hooked up to my hydraulics (3910). Having a hard time getting this male to seat/lock in the female on the tractor. This will be the first time using the AUX hydros since purchasing the tractor years ago. I also picked up some new...

Hope everyone had an awesome Christmas! I am looking to outfit my 3910 with cylinders on the top and lift link like the 445/545's have. Was wondering if anyone recommend a brand/vendor/model? Thanks in advance for any help/info! Justin

Was wondering if anyone has used the aftermarket CAV pumps? If so, what do you think? I need to to pull mine off and possibly get a quote on having it gone through. Need to fix the leaks around the throttle and shutoff shafts and have no problems doing that myself. Can't help but think there...

Have oporatunaty to pick up 4 speed and rear from a 4600. My 2600 currently has the 3 speed, so no live/independent PTO or diff lock. Just wondering if this would bolt up without any additional equipment? Thanks in advance for any help. Justin

Was woundering if anyone could ID this tractor. Axle says Sears and Roebuck and engine has "Novo" on it. Thanks in advance for any help/info. Justin

Was perusing CL for potential loader tractors this morning and noticed this guy not too far from me. Thinking about checking it out next weekend when I'm out that way. Hours are fairly high and I don't really care for a cab. Is it possible to remove cab and convert to an open station setup...

Does anyone know the part number for.a Donaldson or Baldwin equivalent? Ford dealer is somewhat out of the way, but there are big truck service centers near my work. This would be the hydraulic filter that's under the left floor board on a 83 3910. Also, has anyone used a Baldwin or Donaldson...

My dad came across this while going through a bunch of stuff on the property he's trying to sell. Just wondering if it might be anything special. Will hopefully get some more pics tomorrow. Thanks in advance for any help.

Just wondering what everyone's opinion was on this tractor? The CL post said it comes with a loader too. Trying to get in touch with the seller to see if it has the dual power transmission and the loader model. It would be nice if the loader had the front mount pump, but I suspect it probably...

Picked up an extra gun and grease yesterday and wasn't sure what everyone uses as a do all grease product on their tractors and implements. I've heard good stuff about the Mystik high temp based on some preliminary research. I bought the high temp and multipurpose stuff just in case. Just...

Looking to get a plow for the 3910 and wondering what size and number to get. I would like to say that the soil in my area is pretty hard, so keep that in mind when making recommendations. I appreciate any advice anyone has to offer. Btw, its a 2wd model.

Thinking about buying a Danuser F-8 auger from a guy up the street. It is a fairly low serial number, so I'm sure it's pretty old. It looks to be in good shape though and comes with a serviceable 12" auger. He is asking $650 obo. He said I can demo it on his tractor if I want. Input and...

On these ford 3 cylinder diesels (3910), what is acceptable blow by? Is there a known test for hooking a manometer up to the dipstick tub and putting an orifice on the breather/draft tube? I have not seen any oil dripping out of the breather or dipstick tube yet, but I haven't worked the...

I picked up this mower for free today. Everything seems to move on it. I am not familiar with this type of mower but I thought it might come in handy for mowing around my pond if I can get it going without spending much. Some of the wooden parts need to be replaced, but that should be easy...

Was wonder if one of the guys who has wrenched extensively on these older 10 series Fords knows whether the 4610 (2wd) axle will swap into a 3910. I'm looking at a 3910 right now and being aware that it isn't really stout enough for loader work got me thinking. Thanks in advance for any info!

Just wondering if I could get some help identifying this tractor. The gentleman says it's a 1975 860, but that doesn't seem right. Just wondering if they are good tractors as I am currently looking at one of his newer Ford tractors, but was wondering how the specs on this compare since he is...

Thinking about going to look at a 3910. The guy wants $3800 or best offer. It has a little front end damage (says it's cosmetic) and missing the 3 point hitch link arms. They were using it to tote a dump trailer around at a cemetary. The add says it has 4 spools for hookup too. I was...

Was wondering if someone could help me identify this tractor. It looks like an 800 series industrial tractor from the 60's. Has loader/backhoe attachment all for $1500. Thanks in advance for any info.

Hello fellow tractor lovers. I will soon be in the market for a new/used tractor. I currently have an old bare bones 2600 and want to upgrade to something slightly bigger that can handle a loader. MFWD is preferred. I would really love to pick up a 3930 or 4630 with dual hydro pumps, but...

I keep hearing about this high flow pump that runs off the camshaft (i think) on the newer model 3930 and 4630's. The pump on my 2600 is in the same location, so I was wondering if I could run one of these pumps to get a healthy bump in flow. Thanks in advance for any info.

Need some cheap aftermarket head lights for my 2600. What do you guys suggest? Thanks in advance. Justin

Hello Everyone, Like an idiot I originally posted this in the wrong forum and decided that it would get more exposure by posting it here. Anyway, my boss wants to buy me a post hole digger as a Christmas present and I am thinking about the 6900HD from ETA. Just looking for opinions on this vs...

Hello Everyone, My boss wants to buy me a post hole digger for Christmas and I am thinking about the 6900HD from ETA. Just looking for opinions on this vs. the other PHD out there for under $1000. Any advice would be much appreciated. Tractor is a Ford 2600 (~32 pto hp). ETA 6900HD Tractor...

I have a 2600 with single filter setup and would like to switch to a dual setup with a clear bowl so I can monitor the filtration. Will a dual setup like this work without any other modifications (lift pump)? Thanks in advance for any help. Ford Tractor Fuel Filter Assembly 3000 5000 4000...

Hello everyone, I have two questions. First, does $1600 for a "like new" Bushhog 286 medium duty mower sound alright? Second, am I going to be able to run this thing with my Ford 2600 diesel. I really want a medium duty bushhog as I plan to eventually upgrade to a 50+ PTO HP tractor in the...

Hello everyone. I need some advice on which rotary cutter to buy. I have a Ford 2600 and have found a BB720 (Woods) and RCR1860 (LandPride) for sale in my area. 1500 for woods and 1000 for the LandPride. Need to clear overgrown field (3 acres) that has a fair number of 1" to 2" saplings and...