Search results

I'm considering a JD110 w/ 4:1 bucket, BH W/ thumb and post manufacture but dealer installed TnT 3pt. The BH would have QR buckets and I'm not certain what's on it now. First of all, what valve set up should I get to ensure max capabilities for this rig into the future? The dealer was...

I want to add either a hydro top link or full TnT to my 2520. I have the factory power beyond kit for the backhoe. I use my rear blade a lot in the winter and a box blade in the summer. This would be for RB in the winter and BB in the summer. Suggestions?

I've got both a 2520 & X324. I've got about 3/4 acre worth of grass and few 6' wide trails that snake through our property (3acres total). The lawn & trails are isn't perfectly flat and somewhat irregular. I'm looking for the best tool (other than a hand held rake) to clean up the leaves and...

A local dealer has new BX2230 still sitting around. What was the orginal MSRP on those and what would a good price be for one now. A buddy of mine is looking at it? thx

Will a DR PTO chipper work with the JD I-Match? thx Also, what recommendations do you have for a chipper/shreader for a JD2520? I will use it to clean up small brush piles of soft woods. Can't afford hydro feed.

I am going to put in a veggie& berry garden this spring and it appears I need a good ph meter. Any suggestions?

I purchased the JD front wheel spacers anticipating the need for the room to fit front chains on this winter. Now, when I turn my wheel the tires rub on the FEL mount. Dealer says to remove the spacers and don't run chains on the front. I need 4x4 chains. Will the JD factory chains work...

I am building a garage on my retirement property and need to figure out how big a door I should get. I have large property, but couldn't imagine owning any tractor larger than a 6000 series JD or equiv. sized cab tractor. I will most likily have a CUT but I just want to be sure. How tall are...

Does anyone have info on this?

I just ordered a 3pt log splitter. When getting my hydro couplers, what are the specs for the quick connects for the JD power beyond?

I have a 2520 with 200CX and 46BH. I leave the hoe off and usually keep the I-Match on. I have approx 1/2 mile of trails to mow that are raked smooth, but have some turns, bumps and hills. Becuase of our rainfall and long summer days, I will need to mow every 4-5 days. I was thinking that a...

I have a 324X. I can not find in the manual where it talks about servicing the transmission.

I have a 2520 w/ 200CX. I have the JD rear ballist box and plan on filling it with cement and putting in some pipe-tool holders (copied from another TBN post). I don't have filled tires or wheel weights. Question is: Should I get the JD extension or would the "short box" be enough...

My Kubota L3830 is sold and I am waiting on a 2520 to be delivered next week. As an after thought, I am considering getting the JD "Front Weight Bracket Extension" and some front weights for when I use the tiller and do not have the FEL mounted. Can I assume that the front weight rack, FEL and...

Can someone give me the length of the 2305 & 2520 w/ the snow blower mounted?

I'm pricing out both a B3030 and B2920 w/ snow blower and more. The electric & hydro chute controls seem pricy. I need advice on getting them. I have a 300' drive and a 6 car parking area and get weekly snow here in Alaska. The tractor will be in a heated garage. I will also have arear blade...

Can someone post a photo of the rear end of a 3030 with turfs on. SOunds kinky, but... I am downsizing and found that the ractor that I was strongly considering lacks clearance for tire chains - which is a must for me. I'm contemplating the 3030 or maybe the new 2920.

Would thier be enough clearance for tire chains if I went with turfs on a 2520? Also, what would the overall width be? My local dealer only has a very limted inventory so I can't look at one set up this way. thx Photos of the rear end of a 2320 & 2520 with turfs would be great.

I spoke with dealer who was telling me about the new B7610 (B2620?) and he said it had the above mentioned 3 pt control. What is this? And, has anyone else heard of this new machine?

I am downsizing from a Kubota L3830 and have the TC26 in the running along with others. I will get a FEL,BH, MMM, BB, RB, Tiller & front Snow Blower for work on my 3.2 acre place which has most of the "big" work done. My local dealers don't stock many CUT's. How wide is the rear end of a...

I'm down sizing and am strongly considering a 2520. I am planning on getting a BH (so I will have the power beyond kit) and would also like to use a hydraulically controlled rear blade (I hate re-adjusting it manually) for snow removal in conjunction with a front snow blower and occasionally...

I'm down sizing to a BX and I am thinking about selling my L3830 to a buddy from work. I'm trying to figure out if $27,500 is a fair price for the following: 2003 L3830HST (392 Hours) Curtis Cab w/ heat LA732 Loader BH 90 6' Box Blade 8' Rear Blade (For snow removal) High End Tire Chains, Full...

I've got a JD X324 and was thinking about chaining it up this winter to haul around a little sand for the driveway. First of all, the local dealer wants $80 for a set of JD chains (just the rears). I live on a steep hill, with frequent icy conditions and I keep my L3830 chained all the way...

Difference Between BX 54\" BX Mowers With the CinC's approval, I've decided to keep my L3830 and just buy a mower (instead of selling it a getting a BX24 or similar). Now I'm trying to figure out exactly what to get. I know I could get by with a riding mower, but I really need 4x4 and I can't...

I'm going to get a BX and I need to figure my haggle strategy. Does anyone know how Kubota chages shipping on it's new models? I've heard that the car manufactures, for example, average the total cost of shipping (nationwide) and charge a flat fee. In Alaska the car dealers always try to...

Now that my major dirt work is done (lawn expanded, stumps dug out, pond finished) - I am contemplating downsizing from my L3830 to a BX23. I couldn't live without a TLB ever again, but need a mower with a bagger. How long would it take to remove the FEL and BH from the BX23 and mount the...

My FEL (LA723 on an L3830) on a has always had problems with this. I thought the heated cab would help, but it has not - though the "thaw time" seems to be less. The loader will lift and curl, but not recover from these two positions. I saw some posts about drilling a "weep" hole - is there...

I would like to get some suggestions on how to set my L3830 with a hydro rear blade for snow removal. Here's some more info: I know that hydro RB's are designed for larger machines, but this will be used only for snow removal. The job requires snow removal on about 10 long driveways and along...

I am considering purchasing a BX23. Does anyone know of a grapple kit / bucket for use on the BX? I contacted ATI and they said there GK4866 won't work bcz of the center cyclinder on the FEL. Suggestions?

I'm close to purchasing a TZ24 and I'm interested in feedback on the baggers. My NH dealer told me that they thought the baggers worked better on the 54" v. the 60". Also, how do these units perform in general? Also, what would a good price be for the TZ, MMM and bagger?