Search results

Removed this plug and found this, going to chase it with 14mm tool, does this look that bad? Looks like I can save it without using helicoil. Kohler 25hp twin, sux because I just took them out last week and it was fine, wtf? Replacing with Champion 71/RC12YC

Need muffler advise for my Kohler CH25S 68624. 24 786 12-S vs 24 786 11S? Is it just the different sides of discharge or is flange sizes different? Older machine and muffler is done, have it off and looking at $99 to $170 to replace but need to know which one will work. I will say that the OEM...

25hp Kohler CH25S 68624 muffler replacement. 24 786 12-S vs 24 786 11-S ??? Is it difference in flange size or what? Kohler site has both but can't tell difference except 12-S is $50 more? Mine flanges are 2" hole to hole overall 2 5/8" I heard some newer ones will not fit older units, this is...

23x8.5-12 are getting worn mostly from past owner, found 2 brand new in white. Seem to be both right side wheels? Does this matter or should I remove tire and turn it around? Guy is asking 200 for both. 1st photo show treads going same way on both showing inside of rims. ????, I think this price...

Is it true that SpeeCo is the only Cat1 QH not requiring bushings? Can be had at Tractor Supply for $170.

3 point disc, got in a deal, how much are these worth? 3 disc of 4 one set missing, weighs a ton.

Picked up this 5' box blade for $200, 2 way rear blade, (if that's what u call it), plus got a harrow for free. Have no use for harrow but love to trade for a rake or cut it down and make a drag. Box says JBar Corp Dragon F-7319. I love this thing, better then a ballast box.

Kubota G1800S all wheel steer 16hp 3 cylinder diesel with 3 point. 54" deck. Separate 2 way valve lift for 3 point vs deck, with original single function valve as spare. Full shop manual from 1st owner. Manual lists all parts, all diagrams, all repairs instructions. Push Blade, bagger with grass...

2 things, is this fluid ok for this unit? I use it in Kubota G1800. Also I think the 3 point arms are backwards. Just ordered bonded dowty washers to fix leaky 3rd function valve.

2021 Branson 2400H with push button on loader stick diverter valve. Leaking at fitting. Are these WR Long or factory from Branson? Looks like crush washers like brake lines? Or O rings are bad.

Cheap ballast boxes for under $200 and Quick hitches? For under $200 on Amazon or even WalMart how bad can they be if I'm just going to fill them with cement? The Quick Hitches seem to all have same load rating of 3k so what to I look for between Titan @ $385 box,QH @$209 Land Pride or Tractor...

I know it's not a TYM but same engine 1.2 l A1100N2 Kukje. 2021 2400H Known as a good motor but this is what mine is doing at 395hrs. Saw one video of a guy that said injector timing was off and heater was never working? Had to do a "Top End" service. This white smoke at start up is concerning...

Was told I do not need a FLEX Link for this cutter that the arms move and eliminate the need for one? Also, round shaft so no slip clutch will work, must change out shaft. Just gonna get a few extra shear pins.

B7500 seems a little newer and parts are not proprietary. Similar lift, 3rd function would be easier with B7500. JD has 700hrs B7500 700hrs New cylinders on B7500, new hoses on 755.

Been looking for a cash tractor for awhile and looked at many. Lot's over 10k I like the 955/855 and worried 755 will not do with a 4' bush hog since only rated at 15pto? Found a clean 755 with 700hs FEL and 60" deck. Asking 7k. I may use it 30-40 hrs a yr if that. Thoughts? I know these are...

1998 MF1540,shuttle, can't find it on TractorData says started in 2005? Is this an different model that is turbo charged and are they any good?

Looking at a 2013 3616 700hrs and lots are staying no parts available? Is this true or just sour grapes? Nice frame size bigger then Kubota in same class and better lift? What gives?Log into Facebook

Is it rue that a 2013 3616 has DOC not REGEN? Plus the shuttle is true gear on gear with no clutch per say? See one with 700hrs foe 12,500. thoughts?

Found another one! 2004 L2800 1500hrs, got them down from 10,500 to 9k out the door. Yes, it's from a rental place but they say they do service every 250hrs? It's rough but it's all I need. No R4's but not bad for homeowner use. No quick connect bucket but may add 3rd function down the line...

Is the Case DX31 same as NH TC31, specs show exactly same 31hp, great total flow 12.3gpm, bucket 1250lb lift. 2006 model with 2600hrs, seems high. Asking 13k All fluids just done and 4wd just rebuilt. Compared to 2003 TC33 with bushhog, box and trailer for 14K with 1600hrs 7308 FEL under...

Hesitate to buy a China made tractor but can't afford anything else. Found this TYM T234 with 285hrs 3rd function, no headlights asking $8500 Kioti, Kubota, even 10-15 yrs old, way out of my price range for home owner to put 20-30hrs a yr on.

This L3400DT beauty is a 2009 with blade and bush hog, DT with stick in the middle. Any trouble with these? ONLY 258hrs!!! Says 3 range but shows hi/low? Are these better then Hydro? Asking 16k I also found a 2006 Kioti DK 45s with 1300hrs rear remote for same price with more attachments but...

Think I'm close but these 2 are my choices so far. 2006 Kioti DK45S with rear remotes and 7 attachments, bush hog with slip clutch, box, forks, claw, rake, rear blade and rear plow. Quick connect bucket. 1350hrs 2005 NH TC33D with trailer, bush hog and box,1600hrs and counting being used daily...

This one looks like a winner if I can get to it in time. CK30 HST with FEL 750hrs and in mint condition. PRE REGEN! I'm guessing this is a big plus? Asking 10,500 but has people coming all day tomorrow have to get there by 9am. Thoughts? I drove a DK45 shuttle and built like a tank but want HST

I don't need much of a tractor, just around the home 5 acres clearing a little brush hog, 25hrs a year. Found this one for under 8k, thoughts. I know it's older and bucket is pinned and bent. I know about Tstat removal for over heating but overall thoughts with 1500hrs Hydo drive? How hard is...

Looking at a 1800s with front blade 54 inch deck leaf collector, rear 3 point, wheel weights, snow chains, why in Florida I don't know maybe was up north at one time,,, Under 700 hrs, the thing is in great shape but wanted a small fel for my 5 acres for moving stuff around,,,,what do you...