Search results

My dealer wants 1K for a Wr long valve install plus 300 for delivery/ (9Miles) I have identified the power beyond and dont really see it as difficult ? Has anybody faced this recently ? I am adding a hydraulic angle kit (worksaver) with a crossover valve kit as well. It seems pretty straight...

I pulled off my Kubota issued wheel spacers 1.5" I would like to sell the spacers and stud set. They are in great shape . Pm if interested. Thanks R3

I am trying to verify if there is any difference in the (gear) drivetrain between these two tractors. A friend is going to purchase a set of turfs from my L3200 and the turf specs are different for the L2850 than the 2550. The L3200 has the same rears as the 2550. Thanks if anybody can help. ! R3

Has anybody used the BORA wheel spacers. I can not find any guidance on how to install them. I have not heard of any complaints or issues with them. ? for the group- Will Aluminum spacers with steel bolts hold the weight of a loaded tractor. The L3200 can haul a good load on the 3 point. Has...

Is there anyway to verify rims will bolt on from new to old? I'm selling L3200 turfs and a gentleman wishes to use them on a L2550. I would appreciate any help! R3

I throw this out to the experts here. Why would i have to add a 3rd function valve to run a SSQA plow? On my B there was just separate hoses that hooked into the curl circuit. Is there a reason why on my L3200 I could have hoses made to fun the angle feature on the plow same as the B? Do...

I saw a 6 foot plow on what looks like SSQQ on the B 50 series? Does anybody have a price or knows who makes it? If it really is a true SSQA it will fit my L3200. Thanks, Roaf3

Does anybody know of a source to get the pin type stablizers in place of the turnbuckles for my L3200. Is there any similarity between the Grand L. It is getting to be a PIA to loosen and tighten the turnbuckles. Thoughts or suggestions are appreciated. Thanks! R3

I just ordered a right fender handle for my L3200. It is funny it comes with the holes predrilled and stickers over the fender. The part is "extra' I ordered the part and it came but the handle has the studs with no nut and washer. I am not crazy but for 66.00 should the nut and washers be...

Hello all, After changing the oil in my L3200 I was left with some questions for other operators. 1. The manual calls for 6 US qts. I dumped the oil and put a new filter on. When I checked this am the level was 1/4 inch above the top hole on the dipstick . Is this normal? 2. I also...

Has anybody done an oil change in an L3200? Are there any tricks? Just getting to 50 hours the manual has some weak graphics but seems pretty normal . Thanks ! Roaf3X

My Dad was bush hogging and when he stopped he could hear the fuel pump with the key on and the engine off. He also said it was hot to touch. He has 400 hours on the tractor . Any thoughts on the noise or the heat?? Thanks Roaf3x

Hi All. Does anyone have a picture of the belt routing for a 318 snowblower hookup. Have a plow but picked up a used blower without a manual. Many Thanks! Happy New Year RD

Has anyone bought the 3 point carry all from Northern or TSC. They are not cheap but comprable to my local welders's price. Curious on quality and loadability. They are rated for 2000# but I would never use it for that. Any thoughts? Merry Christmas!!! RD

Greetings All, I need to ask other L3200 L38oo owners is they feel their tractor lugs at low RPM. I sold my 7510 and bought a new L3200. The 3200 seems to lug down at 1500-1900 RPM at full forward pedal. If I let off and milk the pedal it seems like the 7510. 1. What RPM are you using? ( I...

I need some help to figure out what the 31.6x16 means on my turfs on the L3200. The reason I ask is that I am tryingto get some chains that fit. Is this an 'inches or metric" number. Has anybody chained the rears on an L3200 or L3800??? Thanks for the help and enlightenment ! Cheers, RD

Anybody here with a bigger Kubota have a good vendor for HID LED lights for plowing? Many Thanks ! Roy

Hi Guys: I have a neighbor in Maine that loaned her tractor out recently. After a 3 week period she received it back. It now will not shift out of High Range. The rest seems to be OK but what can bind the internal workings of the lever? She is elderly and with limited resources so I am...

Has anyone bought a new L8170 ballast box. Trying to check price in NE. Many Thanks RD

Hi Guys ; Took delivery of new L3200. Checked everything on delivery except 3 point. Went to use it today and it will go down but not up. However if you roll the bucket (left) the 3 point goes up perfectly. It would seem that the assembly blocked a circuit in the 3 point hydraulic...

Hello All, I just returned from ME and a drive on my Dad's BX. He has automatic cruise control! The hydro pedal seems to stay engaged both ways. It takes at least 10 seconds before it slowly comes to neutral. Is this a common BX problem? Is there a spring in the linkage? Is there a...

Hey Guys; I have sold my 7510 and am taking delivery of an L3200 this week. I need info on the wheel spacers that are available. I believe they will be exactly the same as the L2800. Does anyone have pics/part number or experience. I need chains that is the reason. It is new so I am...

Hi Guys , I am repainting an ATI bucket with some PPG HD enamel I was given quart of primer with catylyst ? How much catalyst to go with the epoxy primer ? 2 quarts of Kubota Orange enamel ? How much hardener for 1 quart ?How much activator for one quart There were no...

Greetings all; I am contemplating a new purchase from these folks in NH. I would love to hear any user input. I met a friend over the weekend in MA who was showing off (rightfully so) his new B3200. He had a great review. Thanks to All! RD

I was attempting to demonstrate how quick the plow was to hook up on my B7510 to a buyer. I could not get the collar to lock. Not so quick:mad: After much frustration I thought (scary ) What is holding it shut? Apparently I had disconnected under pressure. I bled the fitting at the actuator...

Hi Guys, Can anyone comment on the quality of the Kubota brand quick coupler. There are no aftermarket (horst ATI) yat as the loader LA 524 on L3200 is pretty new. I know the old ones did not fit well and popped off. Do they fit standard skid steer plates well or are they sloppy...

I was wondering if anybody in the Ne has purchased an L3200 with loader. My local dealer does not have one and getting a price from them is difficult. Has anyone had dealings with Ahearn in MA ? I am in CT but the service around me is dreadful. Thanks to all that reply. In the meantime...

Hi Guys, I was moving snow today and heard a strange creaking from left axle. I jacked the tractor up and spun the wheels slowly. There is a definite slight bind and creak on the left axle. The tractor is pretty much new with 230 hours on it. Does anybody have thoughts other than taking...

A friend of mine who owns a B2410 put his ride through the ice. The motor did not go under . It went to the floorboards. Other than changing the fluids can anyone think of some other things that should be done? Kind Regards, RD

Has anbody bought one of these that would be willing to share pricing. I have been looking at the new L3200 or old L2800 with a loader only. Thanks, RD

Hello all. I am shopping for a new tractor. Part of the decision is to give up the subframe plow with hydraulic angle and go to a FEL setup (Curtis) with a WR long remote. Does anybody have experience with this setup? I am hard pressed to change if it isnot better. thoughts? RD

Hello all; Does anyone have any recent prices on the B3300?-HSD with turfs. Is there a real vibe issue with this motor? My dealer in CT had 0 knowledge of even an issue. and the quote I got was about 8% of the MSRP. The economy must be better here?! I am shopping for a new one but they...