Search results

I was very close to buying a T474 to replace my John Deere 3320R but I did an anonymous call to check on getting parts. I am going into day 3 and they can't even give me a price on the part much less availability. I asked what was going on and they said they have to call in each request to...

My 3320 ehydro has been loosing MPH. The manual says in range "A" at 2600 RPM I should run at 3.8 MPH. I have tested range "A" and "B", both fail the test unless I run in reverse. The best I got in range "A" was 2.6 MPH. It is due for a fluid change but it is not over due or low and the air...

I occasionally will use a logging chain connected to the back of my 3320 to pull a stump up. Has anyone had any transmission problems related to this? Sometimes a little momentum is required.

My 3320 HST has an err 12 code. No forward or reverse. The speed sensor was unplugged but had been for a long time. I think what took me out was the throttle sensor plug got knocked off. When I found that I plugged it back in but still no go. My thoughts are that the Drive Controller got...

I have a separate lever to open and close my grapple. Is there a standard for which way I should hook it up. If I push the lever down should it open or close?

I felt a slight jerk from my 3320s transmission. I stopped and checked everything, saw no problems and continued on. I was in 4wd and tried to go over a 4" log later on but the front tires would not move and there was a popping sound like gears not engaging. When selecting 2WD the jerk was gone...

I have a John Deere 3320 that I would like to put a Root Grapple on. I like the design of the Faver products. The problem is they are heavy and may be over kill for my tractor but I am hard on my equipment. The one that I am looking at is 619 lbs. Is that too much my my loader? I an not sure how...

Heavy duty Howse Bush Hog broke a blade at the bolt hole. How common is this? I even have a clutch on the shaft. I was cutting some saplings in the woods and had run over some Poplar limbs about 2" in diameter when it came off.

This was a quick project that has really been helpful for me getting logs out of the woods. There is a limit to what the tractor will lift. It works well for pine and light weight logs or small diameter heavy logs. I can get into very tight places with this setup and not tear up the ground and...

I have some dies that are solid steel about 12肺12肺3? I want to add some weight to my Box Blade because it skids across the top of our hard dirt. I could add 400 pounds or more but I want to know if this would be a problem for the tractor or if there are any other consequences that I may not have...

I am wondering if there is an easy fix for my 3320 parking brake. I have to pull the button out on the lever before I lift the lever or it will not catch and just flops back down. I am often wearing gloves and have to remove the gloves to grip the button.

I snapped both of my lift arms in half using my box blade in reverse. I just read that it痴 not a good idea to do that but it works really well until it breaks. How well will it hold up if I weld them back? Has anyone had any success with this?

I have a JD 3320 with R4s that is about worthless when the ground is wet. I either need to go with R1 tires or put chains on the R4s. I priced chains and was shocked at what they wanted for them. Why can稚 I make my own? I have done this before on our lawn tractor and they worked great. I would...

I need help on deciding between 2 tractors. Both are John Deere and both from dealers. A 4410 with 1100 hours and Hydro transmission for $12,500 being sold by a Kubota dealer 2 hours from me or a 3320 with 500 hours for $14,500 sold by a JD dealer in my town with the HydroE Transmission. The...