Search results

Just replaced one of the deck wheels tubes. Made it one mowing. All the tires that show up on a search have a 5/8" bore. Not sure if I can swap the oem wheels to the aftermarket to make it all work. Anyone have suggestions. They're not cheap.

I have to build a gazebo/judging stand at an equestrian facility. Very good customer. I was wanting to pour concrete piers and attach the base to the piers. Basically it would be a deck attached to the piers with a roof. The piers at the front will only be about 8" out of the ground and maybe...

Anyone know the part # for the remote hydraulic kit? And a price? Thanks Greg

Anyone here dealt with it? I'm having surgery the 29th.

My Husqvarna 365 is 21 years old. Always been good till now. Cutting some trees for a customer when it ran out of fuel. Filled it went to finish and saw would only run wide open, if it tries to idle it dies. Have to choke to start and same thing. Tried different gas no change. Obviously it gets...

Anyone have any long term experience with it? I built a deck for a customer about 7 years ago and the 5/4 deck boards are deteriorating. I have another customer with a deck that has Trex on it and looks like crap. I can get Ipe' out of Atlanta for about the same price as Trex but I have no prior...

Stopped by the Deere dealership to see what they offer. They can get a Danuser with tilt for $8200. I'm tired of boring and packing posts.

Anyone know how to get rid of them. I got some free mulch from tree guy last year and these things are taking over. The cooler weather hasn't helped.

I know there have been several threads on condensation with metal skinned buildings. I just framed a 42x72. Should start roof end of week. The first 24' is an insulated shop. R19 walls and R30 in ceiling. Metal ceiling, bottom 8' of walls will be 3/4" plywood and upper 5' metal. Exterior of...

Need some of your thoughts. I built a barn for a customer almost 14 years ago and used that bubble wrap insulation under roof. Well its deteriorating and she is tired of looking at it. I have a product that is better but my concern is stapling it to the bottom of the 2"x4" stripping. Won't...

Brought it home today.

Have a friend that wants me to put up some fence for a pregnant cow he purchased for is daughter. I've put up fence for horses for a long time but not a cow. I was going to use the 2"x4" woven no climb wire like the rest of the fence I built for him. 5" round posts to support it. I've seen...

If an F series and the aux hook ups would I be able to use them for a dump trailer to pull behind it?

Looked like a nice machine. Its owned by a grading company and they use to mow the property. Paint was a little worn, few dents. Tires looked good. Seat needs to be replaced. My biggest question was this. When using the hydrostat pedal there was not a smooth transition from forward to stop or...

Anyone know how to adjust the deck height on a rider 155? I kept telling my wife to raise the deck on the mower because it was too low. I tried mowing and she had the deck all the up. I found a threaded rod by the right front tire that I adjusted but it still seems its cutting too low.

I was at a piece of property today that was owned by a customer. Saw this sitting there. What do you think its worth?

My Dad asked me to build him a wood shed a couple years ago. Well I haven't made the time to do it. I thought I would ask for some ideas from you guys. I was thinking something around 24'x24', metal roof, wood or metal sides. I would like to be able to lock it up so he could leave his log...

Found a 3060 with 290 hrs. Serial # is 20431. Anyone have a clue on mfg date? Or do you know where the date is on the machine so I can email the guy to look for it.

It was this one http://www.tractorhouse.com/listingsdetail/detail.aspx?OHID=9679051 Said I could have it for $12,100. He would service it. Put a new canopy on it, rear rollers on the deck and two new rear tires. The wife drove it around and of course fell in love with it. Big jump over the...

I have a 99 and a 15 F350. I have an enclosed gooseneck that I just put new brakes on. And I have a new 10 ton gooseneck. Neither of these trailers seem to stop well with either truck. I was checking voltage and at the junction box on the trailers I was getting 9 volts and at the axles 8 volts...

Its 42'x96' with a two story living area in it.

I purchased a new hourmeter from JCB which was almost $700. I thought it would be easy to replace with the factory replacement. But when I plugged it in the hour and tachometer didn't work. I recieved some help from another gentleman on heavyequipmentforums.com. He found that Sumiit Racing...

I have to keep pulling the fuel line loose at the bulb and blow back into the tank to clear the line. Is there a strainer on the end? Anyone have experience on this?

Anyone added a block heater to their JCB? Mine won't start when its cold. The guy I purchased the hoe from had bought the heater but not installed it. Do I just need to locate a freeze plug and put it there?

I purchased a new battery for my 212 yesterday because it wouldn't start. Put the new battery in and it would barel turn over. Took it back to NAPA for a load test and they say its good. So should I take the stater off and have it load tested? I know its a Perkins 1000 engine. Are the starters...