Search results

My Son-In-Law has a 2023 LS MT357 tractor (57 hp) and he talking about getting rid of the tractor that has less than 100 hrs on it. He says that it is going into regen to often. I told him to call the dealer about it but he has mind made up to go and buy a Kubota. He had a Kubota that was 20...

Anybody have or just used one of those limb saws that mount on a front loader on a tractor and use the hydraulics from the tractor. I need something for trimming the tree limbs along a driveway about 1,300 feet long.

I went to my local dealer for a engine filter, engine oil, hydraulic filter and hydro filter. He asked me if the tractor had the S-HST or the HST transmission because they had two different filters. One of the filters had a much bigger hole to screw the filter on. I never thought to ask him what...

I just ordered a pair of 120 watt led lights for the front and a pair of 60 watt led lights for the rear. Are these 120 watt lamps going to be to big for the alternator to keep or make the alternator work to hard. This is on a MT357.

I am looking for a good set of swing cylinders and the bucket cylinder for a Ford 723 back-hoe. Whole be interested a whole machine also.

A friend has a 2020 NH Workhorse 75, I think it's a Workhorse. I do know that it is a 75. He tells me that the tractor doesn't have a regen or Def system in it. I was telling him about junk regen system in my LS MT357. I know that he bought in 2020 new. Why wouldn't that tractor have a Tier 4...

My question may sound stupid, but I cab not find the answer in the owners manual. I want to use a wood-splitter that is using the pto of the tractor to power the hydraulic pump of the splitter. How do I do this, the tractor shuts off if I get off the seat.

My MT357 has regened twelve times now in twenty-five hours. Last two times it was one hour of running. Today it showed some codes , it showed like a open book with the letter S and number 3253 and on the bottom of that there was F11 and to the right of that the number 81. The Dealer is closed...

I am looking for a good 8-speed transmission for this tractor. Can't seem to find much parts for this tractor.

I am trying to find parts for a White Field Boss 2-50 tractor in the Agco site and I keep coming to a dead-end. What am I doing wrong?

I traded a MT3 42 for a MT3 57 back in February 24. I a have sixteen hours on the 57 now and it regened already four times. Always does it when I am ready to put it away, so it's another twenty-five minutes of running the engine at 2,200 rpms before it gets done regenning. The MT3 42 that I...

I want to put a hydraulic top-link on a MT357. I have one from a MT342 that I had but the top-link is too short. I have the Pat's Quick-hitch on the the 57 also. Anybody have one their MT357? What length did you get?

I finally decided to trade my MT342 for a MT357. I needed a little more power when using a 72" front-mount snow-blower. I have close to a forty an half of road to clean out. I believe that the dealer did a very reasonable trade. The MT342 is like new yet. Only has 128 hrs.

I called a TYM Dealer today and asked him about a TYM T574 tractor. He told me that they do have tier four emissions. Can not get a mid-mount pto either for a front-mount snow-blower. Have to go with a self-contained snow-blower powered from the rear pto. The cab is also 97.5" high, will not fit...

I have a MT342 with the Hyro Transmission. A six foot front-mount snowblower is on it. I have a driveway that is over a quarter mile long to clean out. The Dealer said that the 42 horse would be big enough, but I think that I should have went with the 57 Hp. I blow with the hydro in the Mid...

I want to mount 7.5' Western snow-plow on the bucket of a 530 Ck tractor back-hoe. Can I mount another hydraulic valve off the loader valve to operate the plow angle and when I don't have the snow-plow on I could use it for a hydraulic thumb on the back-hoe. I have a manual thumb now on the...

I would like to by-pass the seat safety switch on my MT342 because when I lift my butt off the seat to see where the forks are, the engine will die. My question is if I take a wire and jump between the switch plug will that work? Will that do anything to the computer?

What speakers will fit in the cab of a MT342? I think the speakers in the tractor now are only good decorations. Terrible sound.

I was carrying a ramp with the tractor and the chain unhooked. The ramp fell on the top part of the bumper and bent it back far enough so that I couldn't open the hood on the tractor. I hooked a strap up to the top of the bumper and to my Moline 602 and pulled it back. I was going to add another...

I was carrying a ramp with the tractor and the chain unhooked. The ramp fell on the top part of the bumper and bent it back far enough so that I couldn't open the hood on the tractor. I hooked a strap up to the top of the bumper and to my Moline 602 and pulled it back. I was going to add another...

The radio the LS Dealer installed in the cab of the tractor has all the features you could want but you can't see the read out on the screen. Did anybody install a better radio that you can see what you are doing with the radio with out breaking the bank. I basically want to pair my phone in the...

I have just 59 hours on my MT342. When I have the bucket on the loader and in the air. If I shut the engine off , the loader will start dropping, probably a couple of inches in ten minutes. I told my Dealer about that and that I was disappointed with that. He told me that they all do that. I can...

The Tractor and blower I ordered back in March of 2021 is here.

I ordered the tractor March 16, 21 and still waiting. Dealer says maybe by the end of July. That sucks but he can not help it.

I have been thinking about buying MT342 HC with a 74" front-mount snow-blower. Will this HP be enough to handle this blower for a 2000' drive-way?

I need both left & right side front axle knees and spindles. Maybe even the hubs. The axle knees MUST have the holes for the radius rods. E-mail: koshagrez@gmail.com They must be in good shape!

Where can I get parts for a Leyland 384 tractor. Anybody have any manuals for it ( operators and repair).

I need to replace the 2-stage clutch on a 2110 . The reason is that the PTO will not stop with the clutch pushed all the way down. I would change the whole clutch-pac. My question is, can I install the clutch-pac and then just adjust the drive clutch or do I have to do something with the PTO...