Search results

I will be purchasing an old Massey Harris grain drill. The man I am purchasing from has a tractor with forks that can load for me. What do you think is the best way to load this? Maybe tying on just inside each wheel on the axle? I am afraid it might pinch the grain box on top though. Thoughts...

Interesting. I just assumed it was cast. Maybe its not? i definitely do not have a great deal of land to use it on. I have a total of about 3 acres of plots i would use it maybe twice a year.

I spoke with one welder and he said with the time going into manipulating the steel plate, I would be better off buying another wheel. He doesn't realize that finding "extra" wheels are few and far between. I asked him what he thought If I manipulated the steel myself so all he would have to do...

Here is a decent picture of the bearings. They are not solid at all. I originally planned on building my own Cultipacker and bought the bearings. Then when i bought this the seller would not acceot a return of the bearings. I do mig weld but I am not that good, lol. I can get stuff to stick but...

I recently bought this 10ft cultipacker. I got it for $600, made a good little drive to pick it up only to find out 4 of the 32 wheels are damaged. There is 1 other wheel that is damaged but it is very minor. I am debating on whether to take these wheels off completely, or try and find somebody...

No reason other than curiousity. I have been told some wheels are worn but are in good working condition. Never owned a packer, but read a lot about Brillion wheels and other manufacturers. I was mainly wondering if anybody could tell by the look and shape of the wheel , who made it.

I am not sure. Going to pick it up this weekend. Wheels are 12”

What kind of wheels are these?

I am reading where people recommend removing "3 bolts on each hub" to disengage the chain to where only the wheel and bearings turn. Has anyone done this?

I am actually replacing a rotted tire right now on it. That is what has been holding me up on getting it. I have the new tire, just need to put it on. The other tire has recently been replaced.

I have a 5310 and was having very similar problems with my bush hog as well. However, I dont think it was hitting my tires, but it was swaying a good bit. I had chains tightening as much as i could. Someone on here recommended I add a a spacer (bushing) when hooking the arms up to the bush hog...

I bought a J Bar recently and I am really pleased with it. I got a 7ft with dual tail wheels, slip clutch.

I have a 9ft pull type JD Van Brunt grain drill I will be taking home in the very near future. It has been sitting up for several years under a barn. I am going to grease all fittings and lubricate. The drive back to my house is probably 2-3 miles. Does anyone have any advice or is there...

I couldn’t find the exact size bushings but i found one a little longer that I can cut down into two pieces. Probably be later in the week before I can do it, but i think that is going to fix it.

So this is as tight as i can get it. There looks to be another hook up in the first picture that would would be slighly further away and should get things tighter. This is how it was when i bought the tractor and he used to brush hog a good bit... i guess his brush hog fit differently? To...

I have a 2001 JD 5310. First time tractor owner of about 5 months. It seems i have too much play in my sway bar, notice it mostly with my bush hog. When i have them connected. I dont believe its drastic enough where its hitting the tires but i noticed it when i had my 7ft bushhog on the other...

A good friend if mine is getting rid of some extra equipment he has. He is selling this 8ft (i think) JD Van Brunt grain drill. I glanced over it the other day and plan on looking at it much better in a few days when i have time. Seed box is fine. Fertilizer box has some rust in it. Appeared to...

Ok I have had my tractor for several months and just got my first pto driven implement (7ft bush hog). I have a JD 5310. Do I set the throttle and engage the pto all while in Neutral? I have read where to engage the pto with the throttle down some to avoid slipping the clutch on the bush hog...

Thanks for the picture of the fuel system and manual. So let me get this straight, because this is a little bit intimidating for me lol. I have never done any work like this before. 1. Close shut off at fuel filter 2. Disconnect fuel supply hose and attach new one at the tank. 3. Fill tank...

So i believe i found the culprit of the leak...looks like the fuel line is cracked where it connects to the tank. Also the clamp was not very tight. When i removed it I noticed the crack.

Something must have happened the other day to cause it to leak the tank out. Only thing i can think of if is i ran over some fead limbs when i was clearing an old road and something hit the fuel line??? Never noticed a leak before. And for it to leak out 1/4 tank in a few days... Dont know much...

Let me first say I know pretty much nothing. I got this tractor about 5 months ago. I noticed the other day when i walked beside the tractor the smell of fuel. I chalked it up to nothing. I used the tractor about 3 days ago and had 1/4 tank. I crank it up this morning and make it a little ways...

I just bought my first rotary cutter, a 7 footer with dual tail wheels. It seems when I lift up cutter, the tail end is much higher than the front and when I lower it, same thing. I have extended the top link out as far as it goes pretty much, and it is much better,,,, but is there a different...

I also see a Rhino "SE6" for sale for $1,500,,,it is a 2010 model. Don't know anything else. tried to go on Rhino's website but it was confusing. I didn't see the SE6 , maybe they don't make it anymore. I have seen some good reviews on here for Rhino. Just trying to figure out the specs of it...

Here is another picture. Does this show you anything? Im wondering if the dented up frame has anything to do with it missing the rear skirting on that side. Maybe the guy ran over a cinder block!

Hopefully this picture works. Can't seem to figure out some things on this forum.

My JD 5310 is 58hp to the pto. I have been on the lookout for used rotary cutters, but most look like they have been beat to **** and back. I want something big enough to do a job easily, but not too big to where it would be too big to get in places. I was thinking something around the 6ft...

Found my answer , tried to delete

I recently purchased my first tractor. I am an avid hunter and gardener. I knew i always wanted a tractor, but for the last 10 years I always talked myself out of purchasing a tractor because i know pretty much knew nothing about tractors and how they work. Meaning, if the tractor ever would not...

I recently bought a 2001 JD 5310, 2wd, with 542 FEL. Tractor has 1,200 hours on it. I looked on fastline , tractor house, equipment trader and other websites for comps. I found most 5310's in this year all had 2k + hours and the lowest i found was listed at 18k+. They also looked much "rougher"...

How do you message different members? I click on their user name and there is no option to message.

When I bought my tractor last week the seller told me everything was perfect on the tractor Except the piece that controls the Coolant temp sensor needed to be replaced. When i was looking at the tractor he had me put my hand on the side of the motor to feel it was not hot. He then cranked up...

I have a 2001 JD 5310 I purchased last week. Low hours at 1,200. It is my first tractor and I have enjoyed it thus far. I have been looking around and checking different things out on the tractor and decided to look in the fuel tank and I saw some "crud" and what looked to be pieces of vinyl...

I have a 2001 JD 5310, 2wd with FEL. This is my first tractor and just wanted to ask a few basic questions. I picked up a 55 Athens 7ft harrow earlier this week. What gear do most of y誕ll use to pull a harrow And where do i need to stay on the tachometer? I was pulling it in B3 and C1 today with...

I have a 2001 5310 JD 2wd with a 542 FEL with bucket. Previous owner said he put water in rear tires. Any idea of what it weighs? Couldn't figure out how to post a picture.

I recently found a van axle from a 1995 plymouth van. The van has 14" 5 lug wheels. I am wanting to use the axle for a utility trailer and i want to change out the 14" wheel with either a 15" or 16" 5 lug wheel so the trailer will sit up higher. My question is will i have to locate a Dodge truck...

Im going to be building a 250 gallon propane tank bbq smoker . Ive swapped out the 2000 lb axle on my trailer with a 3500lb axle. However my toungue weight on the trailer toungue says max 300 pounds. What can I do to increase my toungue weight capacity? Trailer is made of 2"x2" square tubing.

Ive got a small utility trailer im wanting to beef up to put a bbq smoker on. Im looking for a 3500 pound axle but having trouble locating a used on. I did have a fellow offer me a plymouth minivan axle with tires for 60 bucks. Would this work? what would this axle be rated for?

Does anybody here use their tractor to pull/dig fat lighter stumps out of the ground? I know a back hoe would be more practical but can it be done with 60-70 hp tractor with FEL, or is it not reccomended? Just curious. Thanks

A guy in a local classifieds is selling a 3pt Hydraulic log splitter for $100. I havent called about yet it so id ont know anything else about it. Just thought id see what yal said.

What is the difference between "operating weight" and "ballasted weight"? Im trying to figure out how much weight ill be movign with my tractor and a harrow. Thanks

Ok here is a picture of my tractor. It does not run. I am trying to get it to my repair guy who lives an hour away. I have access to a trailer i can use with electric brakes or i will have to use a tow truck. Which i would rather only use as a last option. The problem im going to run into is the...

Heres the situation on this tractor im looking at. An older man, in his early 80's has a Ford 5000 with a front end loader on it. The tractor has 2100 hours on it. 8 Speed diesel with power steer. Ind PTO. The tractor has been parked and out of use for almost 2 years now. One day the man used...

This my first post on this site. I wanted to say hey to everybody and ask yal a quesiton. I just bought a Ford 5000 with a loader recently and am having somebody do some work on it for me. I dont know much of anything about tractors and i was just wondering if there is a book that i could get...