Search results

Finally figured this out. Pioneer 8010 series are.what you want. Anything else won't seat unless you can turn the far shoulder down. Will post something up about this once I can get the fittings to work and turn them on the lathe.

I'm thinking bent shift fork not allowing detent to engage or a detent ball/spring issue.

Was wondering if anyone might know what would cause my buddies 5610 to come out of forth while in high range? Pretty sure he has the 8x2 crash box. Not sure if it does it in low. Any help would be greatly appreciated.

All I know, is these won't lock in. Lol!

I have the original factory quick connects on my 3910 and was wondering what couplers to use? Any help would be greatly appreciated.

Few more pics.

Trying to help a buddy out that's trying to fix the PTO on his 2360 he recently bought. He says the PTO didn't work and looks like the slip gear was put in backwards. Does anyone have a copy of the service manual or parts diagram? Appreciate any help! Justin

Picked it up today. $100

This disc is awesome. Actually found another one a little heavier than this one from my hay guy. Going to sell this one to my buddy for what I got it for and get the other one.

Also have this, but haven't tried it on my hard ground yet.

This is what I use in my hard ground. Lots of quartz rock and clay.

Not too many. I think it's perfect for what I'm trying to do. My hay guy has is going to sell this cultipacker to me for real cheap once he's done with it. I should have everything I need then.

Low and behold, my hay guy said he'll sell this one to me real cheap after he uses it one more time. Good stuff!

Not too shabby before I changed the angle to the most aggressive holes. Then it was awesome. Definitely could have played with the top link some. I really need to get a hydraulic top and side link. Ford 3910 Hawk 6' Disc First Pass - YouTube Ford 3910 Hawk 6' Disc - YouTube Ford 3910 Hawk...

Good stuff. I would love to have one of these if ai could find a 6 footer

Looking for advice on a good 3 point cultipacker to purchase. Thinking of making my own too, as I Tig/mig weld and do some machining at work. Looks like the local Agri has the parts to build one, just looking for a design to replicate if I end up going that route. Thanks!

Thanks for the replies everyone! Definitely very similar to the Bushhog brand. Love the blue color since it matches my tractor. Lol! I'll try and post up a good video of me using it once I get the bearings greased up. Everything seems to spin nicely though.

Need a disc for planting small experimental food plots for my sheep and deer. Neighbor wants $300 for this. Looks to be in good shape. I think it's a 7'. I know weight is the key to a nice disc, hence the segmented wheels because it's light. Was just thinking it would still be handy for...

I think I have it.

He says it has a turbo. Also, it has the inline pump, but says it's a CAV not Simms. I'm confused as I thought the later 6610 had the rotary pump. Lol! Still waiting for the numbers stamped on the transmission. That doesn't tell me much about the motor though. Is there something stamped on...

More pics. Looks to have close to 8000 hours on it. I was actually off a little on the machining costs to re-sleeve. Should be more than $200 cheaper.

Looking at purchasing a 6610 that needs #4 re-sleeved due to hole. Trying to get a quote from my buddy now who owns a machine shop. Owner says it has dual power, but not sure what else. Was wondering if anyone could decode the tag for me. Also, what would your opinion be on re-sleeving...

Here you go. Hope this helps.

Just picked up this RB850-4 ($1000) and trying to get her hooked up to my hydraulics (3910). Having a hard time getting this male to seat/lock in the female on the tractor. This will be the first time using the AUX hydros since purchasing the tractor years ago. I also picked up some new...

Need to get some dimensions, but looks like I should be able to come up with something. Hydraulic Side Link Cylinder---2014

Thanks Richard! Like you said, the top link should be easy. I was thinking of just using the side link from the skip loaders. The 3 point hitch is essentially the same. Grabbed this pic from another thread.

Hope everyone had an awesome Christmas! I am looking to outfit my 3910 with cylinders on the top and lift link like the 445/545's have. Was wondering if anyone recommend a brand/vendor/model? Thanks in advance for any help/info! Justin

Was wondering if anyone has used the aftermarket CAV pumps? If so, what do you think? I need to to pull mine off and possibly get a quote on having it gone through. Need to fix the leaks around the throttle and shutoff shafts and have no problems doing that myself. Can't help but think there...

Thanks Rick. I should be able to score a flywheel if I'm patient. Probably just go with a new aftermarket clutch. I've got one of these to help with the radius arm modification. :)

Have oporatunaty to pick up 4 speed and rear from a 4600. My 2600 currently has the 3 speed, so no live/independent PTO or diff lock. Just wondering if this would bolt up without any additional equipment? Thanks in advance for any help. Justin

Was woundering if anyone could ID this tractor. Axle says Sears and Roebuck and engine has "Novo" on it. Thanks in advance for any help/info. Justin

Was perusing CL for potential loader tractors this morning and noticed this guy not too far from me. Thinking about checking it out next weekend when I'm out that way. Hours are fairly high and I don't really care for a cab. Is it possible to remove cab and convert to an open station setup...

I've got the horizontal exhaust. Rick do you prefer the Fleetgaurd over the Wix?

Does anyone know the part number for.a Donaldson or Baldwin equivalent? Ford dealer is somewhat out of the way, but there are big truck service centers near my work. This would be the hydraulic filter that's under the left floor board on a 83 3910. Also, has anyone used a Baldwin or Donaldson...

Haven't really done anything to this old girl but use her. Hope to get around to fixing the sheet metal this fall. Couple of pics and videos for you guys. Ford 3910 Bushhogging 3 - YouTube

My dad came across this while going through a bunch of stuff on the property he's trying to sell. Just wondering if it might be anything special. Will hopefully get some more pics tomorrow. Thanks in advance for any help.

Thanks for asking! I finally got all the 3 point hitch parts installed a couple of weekends ago. I was actually able bush hog a little with it and she did pretty good. Now I just need to get the nose cone, grill and clean it up real good so I can replace the fuel shutoff and throttle orings in...

Just wondering what everyone's opinion was on this tractor? The CL post said it comes with a loader too. Trying to get in touch with the seller to see if it has the dual power transmission and the loader model. It would be nice if the loader had the front mount pump, but I suspect it probably...

The red stuff (high temp) is pretty tacky.

Picked up an extra gun and grease yesterday and wasn't sure what everyone uses as a do all grease product on their tractors and implements. I've heard good stuff about the Mystik high temp based on some preliminary research. I bought the high temp and multipurpose stuff just in case. Just...

Finally got it unloaded today.

Looking to get a plow for the 3910 and wondering what size and number to get. I would like to say that the soil in my area is pretty hard, so keep that in mind when making recommendations. I appreciate any advice anyone has to offer. Btw, its a 2wd model.

Thinking about buying a Danuser F-8 auger from a guy up the street. It is a fairly low serial number, so I'm sure it's pretty old. It looks to be in good shape though and comes with a serviceable 12" auger. He is asking $650 obo. He said I can demo it on his tractor if I want. Input and...

Absolutely! I just talked to a guy that had this for sale. Only wants $650 or best offer. I think it's a match made in heaven for the 3910 and my fence project. :)

Got some of the hitch parts on to check fit up. Going to remove so I can put antisieze on the pins for the lower lift arm pins.

Gotcha. I found a 3 foot section of this at work. I might just make my own if these don't hold up.

Those look similar to the pair I bought. After getting my hands on them, I feel there is a lot of room for improvement. A little off topic, but what would you guys pay for a set of 8 Ford suitcase weights? There are some not too far from my house and the guy wants $70 a piece.

The top link is an older part, as it's lacking the higher connection point. It looks like it's going to work OK though. Plus, it was free. Had to move the tractor to the garage at the front of the property so I could free up the garage at the house. Have to put a new transmission in my...

Got my parts today. :) So far everything looks great! The top link bracket looked like new and was real tight. I can't wait to get everything installed. Everything is so much more stout compared to the stuff on my 2600. This thing is going to be a real workhorse when I get it done.

Man is this thing nasty. Any advice on how to best clean this up would be much appreciated! Not sure if this is from the draft tube or just a leaky valve cover gasket. Also, are the exhaust manifolds reversible? I'm thinking about going to a hood exit exhaust as I like the sound better. I...

I think they allow a certain amount of in and out movement for easier hookup. Flex-link lift arms.

On these ford 3 cylinder diesels (3910), what is acceptable blow by? Is there a known test for hooking a manometer up to the dipstick tub and putting an orifice on the breather/draft tube? I have not seen any oil dripping out of the breather or dipstick tube yet, but I haven't worked the...

It doesn't actually say that it "meets" anything. I think it's the Warren 303 spec fluid. Walmart has the heavy duty (Warren manufactured) fluid that actually meets the spec for the same price Napa charges for this...

Got most of the drawbar bracket separated from the other steel. Just need to remove the two side pieces and then remake the horizontal piece. My buddy has the plasma cutter right now so luckily I had my trusty old portaband. Is anyone using this trans/hydro fluid? I need one more 5...

Picked up a whole bunch of spray guns for free. I should be able to use one of the hvlp guns to spray the tractor. I think some of these are clear guns (Sata?). Scored a spot welder for fixing dents too.

I picked up this mower for free today. Everything seems to move on it. I am not familiar with this type of mower but I thought it might come in handy for mowing around my pond if I can get it going without spending much. Some of the wooden parts need to be replaced, but that should be easy...

I finally had some time to get this abomination off. I should be able to cut the angle that was welded on it the plasma cutter and then fab and weld up the horizontal piece that's missing. Does anyone know the length, width and height of the straight/flat drawbar? I figure I can just make my...

The truck might not fit in the garage, but the tractor sure does. :)

Home sweet home. It's been one **** of a day, but I made it. Hopefully I'll have the intestinal fortitude to ignore my ego and share my mistake so it will potentially save at least one person from make the same one. Thanks to everyone for your help, encouragement and input. I really...

Empty trailer now. Hope to have something on it in a few hours.

Thanks for the info! I just talked to him and he said he won't take a penny less than $3500. I'm still seriously considering it at that. He said he has someone kind of interested so I might need to move on it now. He doesn't think he will be able to come to Richmond with it now, which is a...

Was wonder if one of the guys who has wrenched extensively on these older 10 series Fords knows whether the 4610 (2wd) axle will swap into a 3910. I'm looking at a 3910 right now and being aware that it isn't really stout enough for loader work got me thinking. Thanks in advance for any info!

Just wondering if I could get some help identifying this tractor. The gentleman says it's a 1975 860, but that doesn't seem right. Just wondering if they are good tractors as I am currently looking at one of his newer Ford tractors, but was wondering how the specs on this compare since he is...

Lol! I hear you about never having enough power and the importance of FWD. I have gotten by with my clapped out 2600 for years, but it's just time to upgrade a little especially with the big field fence project around the corner. Just thought of something, I might be able to temporarily use...

A few more pics.

Thinking about going to look at a 3910. The guy wants $3800 or best offer. It has a little front end damage (says it's cosmetic) and missing the 3 point hitch link arms. They were using it to tote a dump trailer around at a cemetary. The add says it has 4 spools for hookup too. I was...

Was wondering if someone could help me identify this tractor. It looks like an 800 series industrial tractor from the 60's. Has loader/backhoe attachment all for $1500. Thanks in advance for any info.

Hello fellow tractor lovers. I will soon be in the market for a new/used tractor. I currently have an old bare bones 2600 and want to upgrade to something slightly bigger that can handle a loader. MFWD is preferred. I would really love to pick up a 3930 or 4630 with dual hydro pumps, but...

I keep hearing about this high flow pump that runs off the camshaft (i think) on the newer model 3930 and 4630's. The pump on my 2600 is in the same location, so I was wondering if I could run one of these pumps to get a healthy bump in flow. Thanks in advance for any info.

Thanks! I never used the term "driving lights" when searching before and that yielded more favorable results. I found some on amazon for around 11 bucks a piece that had 4 1/2 stars with over 81 reviews. I can just paint the bodies to make them look oem.

Need some cheap aftermarket head lights for my 2600. What do you guys suggest? Thanks in advance. Justin

I just love the way this thing looks! I wouldn't mind having one of the original Roadless tractors too.

Hello Everyone, Like an idiot I originally posted this in the wrong forum and decided that it would get more exposure by posting it here. Anyway, my boss wants to buy me a post hole digger as a Christmas present and I am thinking about the 6900HD from ETA. Just looking for opinions on this vs...

Hello Everyone, My boss wants to buy me a post hole digger for Christmas and I am thinking about the 6900HD from ETA. Just looking for opinions on this vs. the other PHD out there for under $1000. Any advice would be much appreciated. Tractor is a Ford 2600 (~32 pto hp). ETA 6900HD Tractor...

I have a 2600 with single filter setup and would like to switch to a dual setup with a clear bowl so I can monitor the filtration. Will a dual setup like this work without any other modifications (lift pump)? Thanks in advance for any help. Ford Tractor Fuel Filter Assembly 3000 5000 4000...

Hello everyone, I have two questions. First, does $1600 for a "like new" Bushhog 286 medium duty mower sound alright? Second, am I going to be able to run this thing with my Ford 2600 diesel. I really want a medium duty bushhog as I plan to eventually upgrade to a 50+ PTO HP tractor in the...

Hello everyone. I need some advice on which rotary cutter to buy. I have a Ford 2600 and have found a BB720 (Woods) and RCR1860 (LandPride) for sale in my area. 1500 for woods and 1000 for the LandPride. Need to clear overgrown field (3 acres) that has a fair number of 1" to 2" saplings and...