Search results

Blood sausage was really good, a cousin gave me a ring a couple years ago and we talked about how our mom’s would brown and then roast it….turned out great.

Consider getting a quote on the next size tractor up ck3510. On ten acres it will shrink in size. Also you would then be able to add the kb2475l which has full 180 bucket rotation and swing (makes a difference) more reach and power. Or as rScotty suggested check out a new or used Kubota...

I have an older Kubota RTV900 that has a homemade acrylic windshield..crack, rattle, scratched with fogged view...it needs to go. So I’m thinking of getting a coated hardened Lexan windshield rather than the uncoated but not sure if it’s worth up charge. Also, besides that choice, any opinions...

Designed in Canada...made in China. A couple years ago I wanted the Woodmaxx made in USA, but they had about a six month wait so I went with the wc68. It has been a very good unit and their customer service was fantastic.

Anyone with experience on vertical steel siding pros and cons of fastener pattern choices of attached file?

I've read and talked to a couple concrete people I know locally and the amount of opinions on concrete is more varied than most construction areas. Anyway, based on conversations for a 30' x46', 4"-4.5" thick slab I am thinking of using a combination of flat mesh panels and perimeter rebar for...

I have been looking on and off for a little larger compact tractor with around 28hp pto. The following is first reasonable priced sale I've come across. It's a local private sale for a 1540 with 1525 loader and Woods BB72 cutter at under $15k. I went and looked at it a couple weeks ago and...

If someone has experience with the noise on this video please post what you think it might be. Right after turning the wheel at the beginning of video you can hear it once and then about 30 seconds in the tractor makes the noise a couple of times. Just the hydro on steering limitation or...

The neighbor is a service field rep for a large equipment rental company. He brought one of these home for the weekend. He told me to stop over and try it out. I figured he wound up not using it as I did not hear it and then on Sunday I was in the front yard and heard a quiet engine. He was...

I had the good fortune of being able to store equipment etc. at a former foundry my friends family owned for the past 6 years or so. Well, most of that property is being sold so pole barn must go up this year. It was pretty nice to have use of the storage while it lasted. Anyway, I have two...

I am looking at purchasing a 6x10 deckover dump. I have found two and each has a couple of different options, so I wanted to ask for any opinions on the option differences between the two. Price is about the same. So which options are more practical? Construction of each, frame style, bracing...

Anyone using a wireless remote on their dump trailer have any pro or con comments? It seems most dumps come standard with about a 20' wired remote control that could be operated by standing off to side or maybe brought over the bed through a sliding rear window or back window to operate from...

I am going to purchase a dump trailer and am considering a deckover style over the low pro style. I have a car hauler and small aluminum utility (really handy) so I do not need a dump trailer for equipment. But I looked for opinions on the deckover style and it seems most are just opinions...

I acquired a Woods GB60 (60") a few years ago that I am going to sell. It is pretty heavy duty. It is for all practical purposes unused, a little surface rust in a couple of spots with not a chip or wear on either blade or rippers. It has been stored indoors for the past few years. Any opinions...

I found this link to UK dealer that restores older Massey models on a commercial basis. They have Fords, JD and some other items also, but appear to specialize in multiple old Massey's. It is pretty interesting, like looking at a dealer time warp. I wonder if any companies in the US do something...

I was thinking about getting a ripper tooth for my BH77 and have a two part question. Anyone switching different bucket sizes out on their BH77 and how long does it take to unbolt pull pins etc.? Also, has anyone purchased a ripper tooth for their BH77, if so what brand? I have some specific use...

Any opinion on these ratchet binders? My question is after watching the video are these faster or any simpler than a regular ratchet binder? One place has them for $29. SCC Quickbinder Plus Ratchet Load Binder | Truck n Tow.com

Anyone familiar or have an opinion on these chain binders? A little pricey, but it appears they are made in USA. Seems like a good idea. Industrial Chain Rigging Equipment Supplier, Chain Hoists, Winches, Securement Products

Would anyone with a B3200 please take a couple of measurements? I would like the measurement from the ground to the center of the rear PTO. Also the measurement from the ground to the bottom of the rectangular hitch receiver. Thanks, tp

I ordered a Kubota B3300 TLB and one decision was tire size vs FEL bucket size. 54" standard or the 60" light materials bucket. I wanted the 54" bucket for two reasons, first it would seem the wider 60" bucket would put more (potential) torque over time on the loader frame if you do any...

I was looking up some info on an engine and came across this Kubota whole goods price schedule on Kubota B series. It is from Jan. 2010 so prices have changed. In the later pages interesting to see how tires, accessories, buckets, etc. price out. First page says 18% discount applied to price...

A question for anyone with a B3200 and also anyone with a B3300 with standard 54" bucket and R4 tires. Do the R4's make the tire/tractor stance wider than the 54" bucket? I saw a B3300 and you can tell it had larger R4's (didn't have a tape with me), can you order it with the B3200 sized r4's...

I have a TO20 and just purchased a 54" Woods Heritage rotary cutter. I initially hooked it up without pto shaft and it handled the weight very well. I have an ORC clutch and went about hooking it up for first time by cutting pto shaft etc. and from prior hook up didn't think anything unusual...

Hi, What size (diameter) are the hydraulic hoses used on Kubota B2920, specifically the BH65? Are the fittings all NPT? tp

Hi, I have a Kubota B2920 TLB I want to run a 3pt stump grinder like this picture I found. Since I have a factory backhoe (Kubota BH65) I thought I could use the hydraulic supply lines that feed it into a proper valve as shown in photo. The dealer said I need to install kit with ports and valves...

Hi, I need some advice from experienced brush hog users. I'm going to purchase a brush hog, standard duty, to run primarily with an old Ferguson TO20 with ORC (over ride clutch) and maybe run it with my Kubota B2920. A 4' seems too narrow and a 5' may be too large for some work (or tractor) but...

Hi, Looking for opinions on a couple brushhogs. I looked at a couple new "weather worn" units on a couple dealers lots: Standard Woods Brushbull 48" (shear pin) given a quote of $1,250. Woods Heritage Classic 54" (shear pin) with a quote of $1,100. I think I could make a cash deal for either...

Hello, Does anyone with the Q/A lightweight pallet forks for the B3200 loader (LA504) which also fits the B2x20 series (LA364) loader know what the forks/bracket weighs? I have the quick attach coupler for my B2920 and want to compare overall weight of Kubota model to some aftermarket units...

Hi, In the Massey operating section check out the front mount pto stump grinder this gentleman fabricated. Simple and appears effective...he should go into production. tp

I was looking at dump trailers and found this one. I like most things about it and was wondering what opinions others would have. I currently have a 14' double axle (mostly to haul a Kubota B) and was thinking about getting a smaller dump or getting a larger dump (something like this "all in...

I have a BH65 on my 2920 with a control panel that rattled constantly and loudly over all engine rpm's that I decided to silence. Another owner (jambx) brought up the subject so I figured someone else may want to read of a possible solution. The first attempt consisted of taking back panel off...

I hope this story not too long for you guys, but i wanted to make all points at once...so here it goes. I was disappointed when MF/Agco came out with a 2610 on same GC platform rather than upgrading their underutilized 1523 model with same TLB design that went into the GC series. IMO put their...

Hi, Does anyone know of mechanical thumb for MF 2375 BH (BH on a 2310) other than the Bro-Tec brand? I saw from an earlier post that Defens had one put on by his dealer, but he didn't reference the brand in his post. I just want to be aware of any other sources.

Has anyone used a standard cat. 1 PHD with their 2310? I've heard some conflicting info (dealer said no) about wether this subcompact will accomodate a standard cat. 1 PHD with 42" auger (some bx24 users stated success with standard) or only a subcompact style with 32" or 36" auger. I know the...

Anyone have an opinion on Massey gc 2310 with turf tires vs ag tires since it will be used with mmm (Massey does not offer bar tires)? Also, opinion on 10" or 12" bucket on compact bh? One last thing...someone mentioned with bh off there is limited spread of draw bars due to subframe mounts on...