Search results

I need a good heavy box blade for doing driveways and finish work. I know the reputation of Gannon痴 and I know they weigh more, but would the landpride be anywhere near the box a Gannon would be? Also any other brands I知 over looking that may be comparable to a Gannon. I want a 80-84 box to go...

I need a good heavy box blade for doing driveways and finish work. I know the reputation of Gannon痴 and I know they weigh more, but would the landpride be anywhere near the box a Gannon would be? Also any other brands I知 over looking that may be comparable to a Gannon. I want a 80-84 box to go...

We'll I'm new to the internationals finally bought me an 826 diesel gear drive. The tractor runs excellent other than needs the fuel filters changed. The TA is even still intact and working. We'll now here's my issue the tractor when you steering bumps as we'll as the brakes! you run it for a...

I have a 6600 not sure of the year yet, but my power steering is leaking out of what appears to be a weep hole in the steering column. Does anyone know what could be going on here?

Here's some of my babies Ford 3600 great little tractor Ford 4000 I restored My ford 3000 it's in as good shape as the 4000 She had an injector acting up in this picture notice the soot coming down the exhaust Another 3000 I had good good running tractor My 5000 with a brand...

I can't figure how to post to the classifieds so here it is. They are 493 planters cotton and corn same as a 494 basically. Everything is free spinning and also has all chains very little surface rust. I'm asking 900 I am negotiable. My name is john my number is 7067551017. The planters are...

Would anybody know a model number of these planters

What model grain drill do I have I have no clue can't find a serial number on it it has 7 rows and mechanical lifted and dropped

The planters are they 1250s and also can they be set for 30" spacings

Lift arm will not lift I can pick up freely, pto does work! which valve could be acting up? thanks

I'm looking at buying a 8210, but the lift doesn't work. it doesn't go up or down. the pto and everything works on it. it is a mid 80s maybe early 90s ford 8210 4wd with a cab. the man said it had all been rebuilt with new hydro pump. does anyone know what the problem maybe be before i jump into...

My tractor got ran out of fuel. It started misfiring so of course I primed it back up got it running again started to misfire. We'll we came to the conclusion the timing was a little high. So we set it back to 19 ran even worse. So I set on 24 zero misfiring runs strong as ever and cleaned up...

What's the most advanced I should run my tractor without problems. It's skipping at high Rpms and no load imr thinking it's timing related. White smokes and skips at high idle at low idle it's fine I turned the fuel up half a turn

Looking to buy a batwing 15' bush hog. does anyone know what all I need to make it work and be able to operate the up and down of the mower and the wings hydraulic wise? It has a single remote on the back.

Looking to buy a batwing 15' bush hog. does anyone know what all I need to make it work and be able to operate the up and down of the mower and the wings hydraulic wise? It has a single remote on the back.

I have a 70 model 5000. It has a Simms inline pump in it. It misfires when it's cold and only when it's cold soon as it warms up its perfect. What could the problem be? It has a brand new motor 4 pistons and rods every bearing cam pushrods all is new. When it first cranks you get the normal...

This is just so if you want to see inside Transmission cover off what's inside right hand side of the tractor Under lift cover Lift cover Pto assembly the hose from pump to pto valve is missing had a link and I forgot to put it in for the pic Pto valve assembly it's on the same...

My buddy has a 74-75 model ford 5000 the pto constantly spins weather the selector is disengaged or ingaged lift works great pto also has no power how hard of a fix is this also what could the problem be a stuck valve

Looking for a diesel allis chalmers I'm from middle Georgia.

So my 5000 is a 70 model diesel with powersteering cylinder under the radiator. it's got upward play in the steering wheel resulting in two or three turns in either direction before it actually moves the wheels left or right. The problem I'm having is knowing what worm shaft to buy. I'm having...

Has anyone had to rebuild theirs? Mine will unscrew till it starts to tyrn the wheels then when you go back the other way you have to basically screw it back in then it'll turn. All the balls in the upper bearing were mossing as well as the lower bearing. It's the power steering version with...

I have a 70 model 5000. The brakes sound as if they are dry like no fluid is around them. do I fill from behind the seat and also where is the level indicator plug ? And also does this fill the hydro sump cavity too?

Has anyone found a mechanical temp gauge that the bulb with actually fit right in the head of these tractors? I know it's a 1/8 NPT every bulb I see at the parts store is way to big. All of them are like 3/8 to 1/2. I wonder if I could buy some fittings to make them work?

I was wanting to build a no till rig where I am soil is sandy. Could I slap some weights on a 7000 4 row John Deere stiffer springs and and some trash whippers and be good to go? I figured the weight would be the main issue

Ok I'm wanting to start farming about 100 acres here soon. I have a ford 5000 and was thinking a 4-6 row 30" spacing would work. I was going to put some yetter trash whippers on the front and kind of turn it into a no till along with Keaton seed firmers. What would be the best planter for me, a...

Looking to start doing some farming on 120 acres 90 acres are feilds! What size harrow should I buy also spring loaded or disk which is better? What size bottom plow should I be looking for? What size planter also? The soil is sandy biggest field is 30 acres rest is 10-15. Will be aquirring more...

My ford 5000 had a Simms injection pump and on the fuel shut off arm on the side of the pump there's a excess fuel button does anyone know about this it also has a thermostart?

She's a 68 with a 256 diesel as of now she needs tlc bad power steering cylinder leaks radiator is bad motor skips rings may be busted in 4th cylinder hopefully

I have a 69 ford 4000. I have replaced all three injectors fuel filter front injection pump seal all the leaking top cover seals and gaskets. My tractor before was losing prime over night so come to find out the front seal was leaking my oil smelled like diesel. So I fixed that and every leak on...

My ford 4000 is a a 69 model diesel. it has a cav pump and single cav filter head how should my lines be routed?please tell me if the pictures are correct. if you look at the top of the filter head with the front of te tractor to your right there is a inlet coming from the tank then the line on...

My lift on my 4000 won't go all the way down it does function great though sticky valve maybe hasn't been used in three months

The day I brought her home All sandblasted up new frontt end bearings bushings and all Of course the step was smashed

I have a 69 3 cylinder 4000 diesel. Tractor runs excellent uses no oil very minor blow by from tube if any. The tractor seems to loose prime over night, but if I leave the fuel shut off pulled out it fires right up. if I push it in over night its a pain to get cranked. could my metering valve be...

My ford 4000 runs great cranks right up when it's warm uses no oil what so ever, but the tractor if you leave the fuel shut off in as in the run position it takes forever to start usually kills the battery, but if you pull it out an leave it out it'll crank right up the next day. what's my...

I have a John deere 300 industrial. The lift is strong but slow. The guy I bought it from put new springs on the rock shaft and all the fluids and filters. Could it need a new pump or is there a valve somewhere that may be stuck open? He said something about a valve that you have to split the...

I have a 73 John deere 830 3 cylinder diesel. I am experiencing some hydraulic problems. The pump sounds like it is whining but lifts great sometimes it will hesitate alittle lift hesitate alittle more then pick all the way up. What could be going on the filters need changing/ cleaning new hydro...

I have a 62 model 2010 jd diesel I just changed my voltage regulator so I need to polarized it correctly and I don't know which two terminals to jump off I have L BAT and F it also still has a generator on it

I have a 62 John deere 2010 hydros with the box blade hovering about a quarter inch off the ground and it wants to jump kind of or shake almost

I have a 62 2010 row crop tractor runs great tranny shifts great too. The syncro range is a little noisy is this normal also I'd like to change the fluid in it is there a full plug on the side that you fill too or is there a dipstick? First syncro range seems like a winner though it is diesel too.

I'm about to purchase a 485 case. This case was a county tractor has about 2000 hours on it everything works on it no issues. The man that owns the tractor grand kids cut grass with it in the summer an they left the fuel cap off of it and of course rain got in it. Anyways it fires right up runs...

My 4000 ford has a steady drip from the hole in bottom of the bell housing. It's not motor oil but hydro fluid or thats how it smells atleast. Could it be the Input shaft seal on the tranny or what that's the only seal on that end of the tranny right? And also where can I get the seal what size...

The tractor cold or hot fires right up give or take a few spin overs. When it fires up it'll blue smoke if u push the fuel lever to all the way down so it's idling. If you bump it down a few rpms to say 800 it clears right up. The tractor the whole time it runs is fine just a little blackish...

I bought a ford 4000 3 cyl with a CAV pump. Tractor runs great has quite a bit of fuel leaks leaks from pump shut off and also have a few lines leaking. The tractor will sit for a day with the kill switch out crank right up the next morning if you leave it pushed it it'll take forever to start...

I'm rebuilding my motor and forgot what way the rods went. the numbers on the cap an rod should line up 1-1 2-2 3-3, but when standing on the front side of the motor should the numbers on the caps and rod point to the right or left. I know which way my pistons go they have an aarow that points...

Rebuilding my motor tonight and the crank bearig closest to the front of the motor has two holes and behind those two holes which are oil holes the other 3 have the oil holes but the back has no hole in the block metal Hole closest to the front of motor 2nd from the front the other two look...

Ok finally got my motor out and apart. I forgot to mark my crankshaft gear to the camshaft or the idler gear, I can remember which one touches the crank gear, but anyways how do I line the whole thing back up? I didn't move the injection pump at all so I should be fine there.

I want to do away with my oil dummy light on my ford 3000 diesel. I want to put a mechanical guage on it. How do Ido this do I just take off the low oil sending unit on the left side of the block and put the hose from the mecahnical guage right in or what? And also how many psi guage should I get

I'm rebuilding the motor in my 3000 ford diesel, which should be a 175. does anyone know what the connecting rod nuts should be torqued at also the head bolts, injector nuts, and the crank bearing bolts? any help is very much appreciated. I'm sorry I don't have the service manual for the 3...

Ui have a ford 4000su and it is not power steering but any high gear the front tires wobble left to right or shake left to right. I can put both my feet on the steering that come out the gear box and push hard and it'll stop is my gear box loose maybe and needs adjusting or what all the...

I have a 73 or 74 ford 3000diesels. I was using it today to scrap a driveway, and as I was scraping with the box blade all the way down, and all of the sudden it pops up to the all the way up setting. I tried to get it back down with screw adjustment and little lever adjustment an nothing any...

I don't under stand draft control I have a ford 3000 and theses r the controls what controls what

I have a 73 or 74 ford 3000diesels. I was using it today to scrap a driveway, and as I was scraping with the box blade all the way down, and all of the sudden it pops up to the all the way up setting. I tried to get it back down with screw adjustment and little lever adjustment an nothing any...

I have a fully restored ford 3000. it's only got 3.5 hours on it and just finished the whole project. The tractor has a tar like supstance leaking from around the new muffler and muffler clampdown the manifold to the top of the hydraulic filter and it's not runny unless it's hot soon as it cools...

My name is John. I'm new to the forum. I love tractors old new, especially diesels. I buy and sell also and hafter rear time restoring them. I'm a gm person but love an old ford tractor. I'm 21 and as mechanically inclined as a robot haha.