Search results

Can you guys recommend a good 'Ford Blue' in a spray can? Also for the correct 'white' that is used on the wheels? Touching up my '65 4000 ! Thanks in advance for any info !

You guys know if this would work on my '69 4000 diesel ? https://www.amazon.com/C5NN2824L-Fordson-Major-Power-Super/dp/B076WVFM36

I came across this image while researching tires for the front of my 4000. Anyone know what brand this is or who sells a 12 ply in this size?

You guys who have a M7060, what RPM is your machine idling at from the factory? TIA

I just got the 12' and it works great.

Nice. Mine has the same ones.

Herkypilot, after looking at your pictures and going to the dealer today, we both have determined the only way to get the offset you have is to unmount the tire from the wheel and turn the R1 the other direction. All we can do for now is move the right outer rim (the part with the tab)...

Heres how they handle the cast centers: consult the dealer.

I looked on page 62 and it only shows the steel wheel, not the cast center. I will post better pictures later, need to go by the dealership.

I have a question for you guys who have a M7060 and changed the rear wheels to get the tires further out: My new M7060 arrived and I ordered cast wheels and a set of wheel weights. Someone had posted a picture of their M7060 with the outer wheel/tire moved to the outside of the cast center...

The PTO engage switch broke on my L4600, and after a few calls found out that Kubota wants your first-born and a kidney to replace that flimsy piece of plastic junk ($170 bucks or so), so Im looking at putting something else in its place. After a bit of inspection it appears to be a simple...

My 451 broke a part recently and I need to replace it, but getting it out is looking like it will be quite the feat to do. :( Any of you good folks have the Service Manual in PDF format that you could share? I have to replace the connecting rod, Part # 172390

Ive been thinking about putting RimGuard in my rear tires, but was wondering about longevity. Does that stuff break-down and change over time? Do any precipitates form and fall out of the solution over the years? The specs on that stuff look very good, but Im wondering how long will it...

:thumbdown: We Can't Let John Deere Destroy the Very Idea of Ownership | WIRED

I recently changed my front axle and put Kubota 80-90 gear oil in. Kubota 80-90 gear oil in 2.5 gallon container. Part Number : 70000-10502 The price wasnt much higher than other brands so I support my dealer.

Whats all that white stuff on the ground.....

Looking good you guys. This is how mine ended up with a little rattle-can on top.

Yes it comes with a wand if you want it. I didnt put one on this rig, have other sprayers I use for spot work. Ag-Meier Industries 3-Point Hitch Sprayers The booms fold so its easy to work with.

Goodbye wooly croton, nightshade, bullnettle, bastard cabbage,, et. al. First light in the morning and zero wind, spraying a few tanks of GrazonNext on pasture.

Okay got a few clips for you. I moved quite a few this morning, but did a quick stack to show how the machine behaves with the load up high,, if you notice with the counter-weight the tractor itself is very stable. Even if the bale bounces while up high, the tractor itself is fine. Usually...

I bought this setup here: Skid Steer HD Hay Spear Attachment with Pallet Forks Capacity 4,000 lbs Our bales are 5x5.5 or so. This first cut is lots of winter rye and weeds. I havent picked any up yet as I only recently got a counter weight made, but gonna put the spear on tomorrow...

That is what I did. With the side plate I welded to, that hook will fail and break before it will peel up or distort anything. Painted

Putting out some fertilizer today.....

Yessir Kubota Part # Handle: T1060-29450 Nuts: 02771-50100 Get it at your dealer, takes about 10 minutes to put on. The fender is already stamped to accept it. As I understand it, the reason for leaving it off is clearance issues with the joystick on the FEL. I dont...

Looks great, I have the 4600 also and love the tractor. Get you a set of forks, you wont regret it ! Oh, and put a right-side hand-grab on the fender, it works well for a place to hold on and put your arm when in the seat working for long periods of time. :thumbsup:

50s sci-fi !

Wow, thats some high-level cypherin' ! Thanks for doing that. :thumbsup:

These forgings are very rough in dimension, this was 1026 steel. As I recall it is 21.5" in length. The hole averages 7" - And the outside was 14.5" - to 15" depending on where you measure. The rule of thumb 'round the shop is 15" diameter round/solid stock is 50# per inch of length. That...

Not anymore than any other implement I guess, mowers, disks and others stick much further back and will crunch something also. At least the end is radius'd smooth. Kinda like hammer forged steel battering ram. :D

I threw together a counter weight yesterday, guess we will see how it behaves and if it helps load balance on the FEL. I had a small KingKutter blade a friend had given me because he had put it behind a very large tractor and bent it up really bad and ruined it. But the front 3-point area was...

I am using these things every single day doing something, but each day is a different task, and the forks meet the need. I used a FEL with bucket on a MF135 for decades but it was the old style that was perma-mounted. You just learn to get used to what you got. A person really doesnt realize...

Put 5/16" on the ends for those instances you need to lift stuff up that requires a wider spread on chains, and 3/8" where the loader arms are, welded thsoe to the thick plate there. Although I will never be lifting anything heavy enough to cause it, all of them are fastened at a...

Maybe its an old guy thing, but these forks sure are makin' my life easier and they haven't been here but a week.

I had bookmarked the thread, but lost it. What size bucket hooks did you guys end up putting on your loader bucket? Im gonna run and get some later today to weld on but thought Id ask what size you fellas ended up using. Thanks in advance for any info.

Im not 100% certain, but thought I read somewhere that the rubber floor-mat on one of the L-Grand models will fit the L4600 because they are the same floor design. Is that accurate or did I get it mixed up? (which I do all to often) I love the simplicity of the L4600 but it sure would be...

Im gonna order one of these as my indicator light. POLY PERFORMANCE OFF-ROAD PARTS :: Instruments & Gauges :: K-Four Quality Switches :: Indicator Lights :: K-Four 440 Series Jumbo Indicator Light w/ Engraved Lens

Anyone have any experience with this?

A while back I was doing lots of reading here on TBN and had read a thread on this site where a fella mounted some LED lights on the fenders of his Kubota as work lights. As I recall he mentioned something about there being wiring already pulled for that and he put these lights in some...

Hey there, does anyone know where I can find a wiring diagram for a TO-35 gas tractor? Thanks in advance for any information you can share.