Search results

no it is a small leak and obviously needs to be done it is still working not overheating. Just trying to get it planned and the plan of attack.

trying to revive this we haven't fixed it yet. Only video I could find online was horrible and basically said you must remove the entire front of the tractor radiator and everything to access the pump

Ya looking like I have to take the front end off and that doesnt look appealing to me.

Did you remove it yourself?

Anyone replaced the water pump? Do I have to pull the whole front end off first? Not much on Youtube. Any pointers? It is dripping after you shut it down. Don't see it leaking while its running.

I do this all the time lol. I was thinking about something to dip them in or spray on them?

Yep they are good now if they would just make them with a closed cuff I would get another pair.

How much wear and tear will they take?

I love those deer skin ones as well but they don't have the closed cuff and they don't last very long either.

I will look at them thanks. We have no trouble with cold weather down here in South Central Texas! lol

Anyone used these? https://www.amazon.com/Vgo-Chainsaw-Gloves-Protection-Orange/dp/B0761SRCG3/ref=sr_1_6?crid=251N2NZ1H19K&keywords=Heavy%2BDuty%2Blogging%2Bgloves&qid=1677684500&sprefix=heavy%2Bduty%2Blogging%2Bgloves%2Caps%2C87&sr=8-6&th=1

Ya i like those but really want a glove with velcro around the wrist to keep dust and stuff out. And the ones with the draw string don't stay tight.

May seem silly, but I am looking for a glove that won't wear holes after three or four uses. I cut, split and handle firewood at least 3 times per week and I like the gloves that I am using now, but they just don't seem to hold up very long. I am using hydra hyde with the velcro around the...

The D0009 was the one! My problem was the tail mount so I am good to go and learned something new. Thanks!!

I ordered a powercut. It was the tail mount size is what I was not understanding i think I have the correct one now.

Ok yes the tail mount is where I am having trouble and couldn't figure out what size my Makita 7300 is! So you are saying D009? Is there a guide somewhere that shows the different saws and what size the tail mount ? Thanks!!

Yes and got the wrong one once before also for a different saw, plus the markup is heavy.

I am having a tough time finding a good webpage that shows exactly what I need to replace the bar on my Makita 7300PRZ with a 20" bar. Here is the current chains I am running. Oregon 73LGX072G Power Cut 20" Pitch: 3/8", gauge: .058", drive link count: 72I \\ I ordered what I thought and it...

Update and another question!! Ok had the New Makita for a few months now and very happy with the 7300 so far. Big difference from the 510 and I like it. I have done a few slabs with the 30" bar and got the chains from my dealer but My question is: Is there a particular style of chain I...

Well I am happy with my current PS510 hopefully my new one will last long enough to still get parts if needed.

Dang well I had already ordered it when I posted. Thanks for the information though never know when I get another.

Well update time. I am about to pull the trigger on a EA 7300PRZ with a 32" bar but will run my 20" bar on it most of the time. My PS 510 is still going and love it. Mike

All good thanks for the reply. My dolmar guys say that the 6400 with a 30" bar will do the trick. I did cut some small pieces with my PS 510 it did pretty good. I really like my dolmar, and from what I have been told the makita is name only they kept all the Dolmar technology.

LD1 I noticed you have a wood business or cut alot of wood? Also noticed all you Dolmar saws. I have a PS 510 thinking about getting something bigger so I can put my small mill on it to slab out some Mesquite. Not alot just a few here and there. I mostly use the saws for my firewood...

Thanks for the reply. Yes I haven't plowed alot yet with the new couplers(not the deluxe) but so far so good. Probably 4 or 5 hours. I was told by someone that those deluxe couplers can not be repaired???

Ya we check the drains on all of them and they were fine. Those hose ends in the pic are for the grapple the new ones we did put on the disc harrow and both worked fine this weekend with the new couplers. Just holding my breath though because the "deluxe" style worked for awhile in the past...

Ok went back to the JD parts man and low and behold another new part number came up so we are trying them to see if these are better. I put the grapple on them and they worked for now and the old style right next to them blew out as usual. I did not have time to hook up the disc harrow to...

We only have one tractor.

Update we took them to the JD dealer and they confirmed that the coupler and the hose fitting/nimple is the correct match. Also talked to a JD mechanic and he said that they just fail and can't think anything else that would be wrong just that they are cheap and they go out. Evidently the...

Ha ha that would be my father in law!! This is not the one on the tractor right now that is failing, but it is exact same kind.

Yes about the leak off hoses and they are free and clear nothing clogging them. I also cleaned the filler cap heard that somewhere. We changed the hydraulic oil less than a year ago might have 50 to 100 hrs on it. I know it could have been contaminated I guess from something else. I was...

Here is one that we took off but the same one and we got them from the JD dealer.

I am going to try and verify tonight when I get back down to the ranch to look at the numbers.

I am trying to get the size from my father in law. We got them from Ag equipment place in my hometown I am trying to get the actual size and make from him. I have seen youtube videos that were the same as what we have on this tractor. Like previously said if we replace the quick coupler it...

Ok sorry left my laptop at home and had to reset my password on the work computer. Thanks for all the replies and the help. Let me try this again I am attaching a pic that is not mine but we have the same quick connects( right term?) I am 99% sure we have the correct size it works and has...

This are crimped and then the fittings screw on. I thought it might have been the cylinder on the disc harrow but it does in on the grain drill too and the the other remote right next to it pops off just not as often. It is hooked to the bucket grapple. All the years growing up on a farm and...

Ok sorry about my lack of terminology, but the hydraulic line to the disc harrow is popping out of the SCV and the oil loss is coming from the middle of the SCV itself. Shooting sideways to the left tire mostly.

Hey just saw you are from Lytle!! I am in Hondo.

Hoses pop out of the SCV. How can I tell what pressure it has?

Ok I certain that they are not getting pulling on because it does is when just sitting still. I have purposefully check that. Just yesterday put a new set of connectors on and same result. When we did change out the SCV's it seemed to work for awhile but always the same result. Can the...

Yes whatever happened here I am having the same issues.

Ok so we have 4 sets. Two sets for the buck and the other two sets one works the grapple and the other is open for implements. One set on the outside left side we have had to replace the SCV's 3 times already. They leak and couple times just blow out fluid everywhere. The set that is on the...

No to answer your question the bucket works fine and it has been fine it is the remote next to it. But now it is doing it on both. This has to be something else because it is just crazy.

Ok so we have 4 sets. Two sets for the buck and the other two sets one works the grapple and the other is open for implements. One set on the outside left side we have had to replace 3 times already. They leak and couple times just blow out fluid everywhere. The set that is on the grapple...

Well we got it fixed! It was the dampener thats it. From what we were told it was at its lifes end anyway. Tractor has 6k plus hours on it. Had to take the Right rear tire off and tilt the cab that direction as someone said. Wasn't cheap the parts were over a grand by themselves haven't...

Got it thanks for the help.

I am trying to figure out how it makes it stop working as well. I did look under while engine running and the shaft is still turning.

ya I thought that was it but now figuring out how to replacement.

I know one thing you don't want to get that black goo on you!! It don't come off very well.

How big a job is that replacement?

Ok it must be more serious than a piece of rubber then because we have no tranny or remotes.

We have a 6400 and one day I was moving a bale of hay and I lost hydraulics light came on and I started to get smoke from under the cab. Upon inspection i noticed that the smoke was coming from what you see in the picture. So I know nothing about this and what it does. What am I up against...

So I know Makita bought out Dolmar but did they make changes to the saw or are they the same machines with a different name. Has anyone purchased one lately? I currently have a Dolmar PS510. Thanks

If it ain't one thing it is another!!!! So got the tractor all cleaned up and was getting ready to put the shredder back on it, but wanted to go knock down a very small dirt pile near one of my boy blinds. Did that job and on the way back to the house I saw a small tree down in the road. i...

Ok the ground MPH is working. My father in law got in it the other day and it just worked after doing nothing which tells me we have a loose wire or short somewhere. Then got in it the next day and it didn't work. I went yesterday to look at it and it didn't work at first. I then went down...

Ok have a 15 ft bat wing been using it fine for awhile and everything worked fine. Hooked her up the other day after a few months of not shredding and the PTO engages and then the light blinks and PTO shuts down. I am up to the required RPM's and I am no leaving my seat. It works for about...

Ok it runs fine but if you shut her down and let her sit over night it won't start right away the next day. We turn the key on and wait and it will fire off and die. Work the throttle and turn key on wait and then try again and it just turns over and won't start. Turn it off back on again...

here she is.

Hey guys! Family bought a used 6400 couple of months ago has about 5600 hours on it has the 620 loader I believe. Father in law was doing some road work and was on it for about 2 hours and got a stop engine light which showed to be the hydraulic fluid over heating. We changed all the...

The right one is working fine but the left side leaks slightly and it seems to not respond well especially when cold. The tank has plenty of fluid. Any ideas. Can you rebuild those things?

I am looking at a TD95D with a bucket and 4wd no cab and he is asking $24,900. It has 2156 hours and it is a 2006, is that in the ball park? thanks, Mike

I have a ford 1520 with narrow utility type tires, I need to put wider turf tires and rims on it. Any ideas where to go to get these? thanks, Mike

I have a cub cadet zero turn that is made by MTD and it has a Briggs V twin intek 22hp engine that is blown. Anyone have experience replacing these and where I could get the best deal on a new engine?

I have my grandfathers old Cadet 75 it is a rear engine that has briggs engine and I am trying to swap it out with another but can not get the drive pulley off the crank shaft. Any ideas where I could look for a replacement?

I have had this MS 250 for just over a year, I used it last month with no issues took it out this weekend and I could barely pull the starter. I might get one rotation and moved but very difficult. The first thing I did was take the spark plug off and still the same issue. I then took the...