Search results

So the tractor with about 1000 hrs on it started being sluggish when cold lifting the bucket, so much to the point that i would sound like the pump is straining and like you're pumping gear oil through it versus atf/hydro fluid. It did this for a short period of time but have not put many...

I had another post 6+ months ago about something hanging up in the rear axle.. eventually it got stuck and we couldn't move the machine, then suddenly i couldnt get it to repeat the rear axle locking up at random issue.. been fine for a while now. First snow storm we pushed a push box with it...

It happened over the summer, i had a 3' deep hole maybe 20x25' in size i was digging burried concrete pieces out of before we backfilled it in the yard. I was curling the bucket and lifting the arms to get these pieces out and one of them put a lot of weight "didnt budge at first", on the right...

Anyone know how i could get a new air filter? ive found some part numbers online, but mainly all for hard parts, not replaceable stuff like the air filter etc. I'm getting a new group 51r "honda civic" model car battery for it because the one that was in it was a lawn and garden little peon...

In the last few hours using the tractor, several times it seems like while digging in dirt/mud, that the tractor parking brake was on. I tried to back out of a hole digging dirt, and the machine would bog hard like it clouldn't move, then suddently its like it broke free, like its attached to a...

JD dealer says get a different harness from CAT. CAT says get a JD harness from one of their grinders.. but i dont think JD worksite pro makes a stump grinder :/ The electronic cable attaches to the skid steer loader to run the diverter solenoid valves on the stump grinder to move the head up...

We leave this on job sites, mostly for the winter for snow removal. Last season, a machine was "broken into" by use of a default deere key, used, few items stolen, stole our salt and re-locked the machine :( I want all the door locks rekeyed so our company has our own key for them. What do i...

The low fuel light lamp stays lit all the time, im going to guess its a sensor? I believe it came on months ago right after we refueled... and its still lit today, no matter how much fuel is in the machine, if you have any idea id like to know :)

We have one 319D 2010 track loader model "purchased Feb 2010", that we'd possibly sell and a 2011 332D skid steer purchased Dec 2010. The 319D was $50,xxx before tax, it has 215hrs on it, almost always garaged indoors. The 332D was $54,xxx before tax, it has under 100hrs on it, and is stored...

What bulbs do they take in the hood and top of cab field lights? I think theyre all the same h1s or h3s, cant tell though Im gonna make an attempt at getting all 3 sets converted over to HID kits.

I have the skid steer attach couplers on the front, also have front accessory flow lines on our 09 4720 deere... 2.4L turbo 4cylinder 66hp etc. I plan to run this auger/post digger on the front of BOTH our 4720 tractor 11.5~gpm max and our 2010 Deere 319D skid steer, same motor, setup but 60hp...

one of my guys was using the tractor this last snow storm and after i asked him about the seat being adjusted oddly, he said it was like that the whole storm. The BACK rest part of the cloth/cab/air seat has the TOP pointed forward. You cant sit in the seat straight up and have your but and...

$1500? $2k , 3k? Looking at a rcr18 60".. says its 600lbs. http://www.carverequipment.com/landpride/images/rotary_cutters_2.jpg

When you go to their site.. you can "build it now" for most implements to find out how much they cost "retail" ... If a mower is $2500 retail, does their site include the shipping to the dealer? I got a quote from my dealer and oddly, the prices were all more than i saw online previously :/...

Im looking at heavy duty , mainly 84" Frontier brand, or Landpride brand box blades. Seems theres a ton of them, but ive heard an 84" could be $1500-2k.. and any with the hydraulic scarifiers, to control from in the cab vs the normal manual way could be 1k on top of that.. Are some box blades...

I think my manual said something like it was a 4000lb capacity ? Not sure why im thinking of that number, just just for kicks. If i take the pallet forks on the 400cx loader, lift up ~2600lb of weight, even with an extended ballast box on the back filled to the top with concrete on a 4720 cab...

Anyone else see anything similar? If you stand on the passenger side of the tractor, look low, right to the right of the big hydro fluid filter thats near your back wheel, there is a black 1.5"-2" hard metal black tube/line that runs into the trans side of the filter area. This line runs all the...

Mine is hooked up to the 3rd scv electric diverter kit, ive found that after the machine sits for 24hrs, the tilt hydraulic on the side of the 3pt hitch has let down a little and the rear ballast box is crooked :/ Is this normal or is there a tiny leak? My new machine only has 4hrs on it so...

How do you know if theyre set inwards or wide? Mine are about 65" from edge to edge in the rear of my 4720 with R4s... can they move out wider? My smallest bucket is a 72" so another few inches either side wont hurt.

Ive heard people only having an attachment on the back, others ONLY have their ballast box filled with dirt, sand, stone or concrete. I have just 6 bags of "salt" in my new ballast box/w extension, 300lbs worth and 220lbs of rear wheel weights, 110 each side, or two weights per back wheel, and...

No matter how i try to link my picture to my user name, it keeps saying that? The file is small, inch by an inch on the screen and only 12.76kb at most. What gives?

I have the front loader mounted boom couplers on a 3rd diverter scv valve for future grapple type bucket and all. Im looking at a skid mounted hydraulic boom breaker attachment that requires 6gpm from Deere worksite pro attachments. Is the flow through this sufficient or is it very minimal like...

in my signature, the tractor has a PTO and electric diverter switch to divert from the front loader hydraulics up/down motion to the rear PTO 3pt hitch up/down, but no rear hydraulic lines at all. We were considering a rear 3pt small box blade with the hydraulic scarifyers that raise up/down...

I will be picking mine up somewhere around the end of this coming week hopefully, problem is, i left the only large enough trailer out in Ohio with one of our cars until end of this month... only other trailers we have are a 14' dump trailer, enclosed 24', 18' landscape trailer, only 7k gvw plus...

I know their documentation says a cx model will do about 2700 with proper ballast. IS ballast in the ballast box with extension filled with cement ENOUGH ballast for that or you need more. Are you on a cab or open model, do you have any rear wheel weights or filled rear tires? Does the 4020...

Well, its come to my attention that the 4520 and 4720 Deeres are getting the slight HP bump for 09. I heard on here somewhere that this was to start in Feb 09, so i didnt worry about it, but at the GIE show last week, they had the 66hp 4720 cab tractor there, they already do make them. My...

What does a cab model 4720 weigh? round about without any ballast box, just fueled up with a 400x or cx loader? What is the top height with the R4s to the top of the cab? I have about 8 feet of headroom into my one garage safely, if its much over 8', ill have to decide how to modify the...

Whats it take besides the stated "up to 10% down required" for these big purchases? Running a business, especially one that isnt very profitable yet, its always hard to justify your true income. Who here has financed through Deere Credit on one of their more recent 0% offers for a 3000/4000...

Their site only allows the cab option on the 3720 and not the 3520? I know the memer Naru just got one though in the last couple months... Its red X'd out when you select the 3520 on their site. Honestly What are normal dealer prices for the 2720/3520 and 3520 cab with CX loaders? The website...

JD says its a 15k btu heater, does it run heavy draw off of the alternator/electric system or does it work through a heater core system like a car to just use the "available" heat from the diesel engine? Just wondering, since if you were using it with all the lights on or powering anything...

Ive driven a 3520 open tractor with loader and a 4320 cab model, after hopping in the cab, theres no way id want to get the open seat model :P Only catch, was the main reason for a bigger machine purchase would be adding the backhoe option. Cab models cant use one so without that, the only...

ok, so im a die hard simplicity fan , sorta, I also like JD too. Ive had my heart set on a Legacy XL even though ive NEVER actually seen one in person yet or driven one. Dealers just never stock them or carry them, due to high cost i guess. I hope to drive one some day regaurdless. Ive priced...

I know i asked this once before, and dont think i got a strait answer months ago. I live in NJ, we now have sales tax of 7% up from only 6% last month. I pass the JD dealer in DE when traveling down RT13 at least once a year so i know where its at and have stopped in there before. What would...

so on the deere credit app, it asks for my name and address of my insurance agency? IS this my house agency or auto policy? Why do they ask this? Do they require insurance on the tractor? If this is anything similar to our NJ auto policiies, there is no way im paying more than $20 per month...

What model in John Deere does the tc35da compare the closest to in size and price? It seems much larger than the 3320/3520/3720 models do, am i right? its weight is 3300 something before the 16L loader or attachments. I rented one this weekend for some work and for the most part like it...

Well ive been quoted $9700~ for the 4x4 27hp briggs diesel motor and the more aggressive tires, not r1s though, 1500 for the 60" mower deck, $3150 for the 500lb lifting front end loader, $2100 for the 50" rotor tiller, the 3point hitch is included in the $9700 price and $1450 for a box scraper...

well ive been looking into a tractor for landscaping, back and forth of what i need/dont need what i want or would like to get. I know i like the 3720 JD mid sized but its $22k list plus attachments. for not much more i can get a 4520 larger model with a JD deisel motor! anyway, for this 2006...

Im comparing between the JD model, i know all of its specs, how is the new holland model? Whats its price for the 47hp motor model listed here plus a loader? any pros/cons vs the JD priced at $22,xxx without a loader?

I know about every spec to the JD. Where can i find out prices on the MF 1500 series? im looking at something 35-47~ hp range with a loader, box scraper and going to run a post hole digger for planting.

I know some dealers with other finance incentives cant lower the price as much if you dont pay cash, the price they must pay is 1-3% if it is financed with the 0% deals.. Is this true for JD dealers too?

It says theyre all 68" wide for the rear tire width, yet i saw a 65" box blade on the rear of a 3520 and it was wider than the rear R4 tires were?

Ive always been able to use one, have had enough jobs people have requested it, but couldnt spend only $1k or under on a cheap unit and couldnt see spending 2-3k for a professional one, a PTO unit would be great, nothing huge but maybe to take 4" diameter stuff into it Who makes them? what PTO...

Well i have many Questions. Frontier Landscape Catalog brochure pictures 1. Does anyone have a MSRP price list for thier landscape equipment? 2. It appears high quality, anyone else own it? 3. Why does JD sell a 65" tiller and also a 65" frontier tiller that LOOKS exactly the same as the JD...

Ill be looking at one tomorrow, i would only even consider it if its in great condition, if it looks beat, i dont care if its 4000$. Theyre $27,xxx new with a 300cx loader option, ihitch,ballast box, mid pto, hood guard. 15% off that is $23,xxx for a new one. Could i expect this under 20k...

http://www.deere.com/en_US/groundscare/products_equipment/mulch_on_demand/index.html I know this isnt available for TRACTORS but this is bada$$! If it were between a JD 757 commercial mower with a deck you flip a lever and turn it into mulch mode i wouldnt have considered any other brands when...

I have a customer asking about this, im due to have a 65" wide rotortiller soon, could i rotor till and then box scrape the entire area before sod installation?

Just curious to see.

Even if the tractor is slow at using one, im looking to get something with say a 24" auger on it. Does JD or Frontier sell anything attachment wise like this? Has anyone purchased one through their dealer as a package with the tractor, tiller, front end loader and all?

60\" 7 iron deck on a 68\" wide 3320 series tractor? Its the only deck option? If the rear tires are almost 69" wide, why would you not use the 72" 7 iron deck? I cant see this being too productive if the tires are running over some grass on every pass since you dont cut a full 60" wide each...

not sure what theyre extended warranty is or what they offer, but if i think that in 3yrs i may only have a few HUNDRED houirs on the machine not 2000 etc. can i opt for a 4 or 5 yr 1000hr warranty? Its not that i feel something would break on these things but i cant possibly use more than 1/4...

antifreeze? full rubber what? How much extra weight do loaded tires add?

The 4000 series is 3700lbs base vs 2900lbs base for the 3320 model. Is the 4000 series that much better? I think i like the 3320/3520 models more since theyre not so large yet and have more attachments available for them.

I live in NJ, i have a few local JD dealers, yet buying a tractor that is possibly over 25k, thats a huge chunk of change for sales tax at 6%... Its only 80 miles to deleware and maybe 130 miles to their JD dealer. Id like to support the local dealer in the purchase at least, but i can save...

assuming its not on the tractor. How much does each one weigh? I saw another post here saying another model was 774lbs? For trailering purposes, when all said and done for say a 3320 Model 2006 JD tractor, a 300cx loader, rear tire weights, front hood gaurds and a 55" rear pto driven JD...

It seems both start and end at the same price range and similar motors. Both have attachments i would buy. Does anyone know what JD charges for certain attachments? How besides a dealer do you find out? Like how much is the front loader, rear backhoe and 55 or 65" tiller? Are these items 4-5k...

buyjd-ML-818683-ML- Posted in wrong forum. JD specific question.

I had posted in another post about looking into sub compact tractors, 10-15k max. As JD's 4000 TEN series stuff seems to START at 15k+, they also have the residential 2305 4x4 model. Anyone have one of these? Where online can i find some pictures to compare the size of this compared to the ten...

buyjd-ML-818521-ML- Posted in wrong forum. JD specific post.

I own a small lawncare/landscape company. I primarily only do a few MAJOR landscape jobs per year, major to me at least. I have 2 already this spring, one involving a LOT of rotor tilling and mulching. Another moving around a lot of small pebble rock, mulching, tree planting and i need to dig...