Search results

i put the pin in the sloted holes and need to latch the arms back down. Thank you. Also, i've been looking for the oil/filter cross reference but haven't found it here yet. Put 2 hrs. on it so far, was 944 hrs. have 8k in so far, this is a great utility tractor for sure.

yes sir, like i said, i don't know much about this model but it's what i needed. Both right now has no pin in the slots, i guess so they can be free moving. Just getting used to it. Thank you Jeff, have a great day.

I know nothing about them, however i did read some of my owners manual. But not sure how to adjust or set, they are pinned to the axle stubs then to the lift arms. Not sure i know which hole to pin or just let move freely. Just bought used 900 hrs. $10k, thank you and i understand about the...

I sold my Yanmar and bought this 2008 Kioti ck30 4x4, my question is on the rear stabilizer bars. Can i change them out for the chain type and also where can i find a complete grill guard frame +/- the inserts? I love this tractor and it's something my wife can handle also. Thanx in advance

i did find this and drain it, but only a qt. came out. It did overheat and was shut down fairly quick, i noticed a lil' smell and saw brown water being throwed out of side cover. Didn't notice temp. light either, But i am ordering parts and maybe new radiator from Hoye next wk.. I didn't see two...

I call myself looking but can't seem to find the block drain plug. Top hose busted on 1700 and i have drained the radiator and overflow tank, this has some rust and or junk in it. Want to clean up some and flush, maybe w/ a std, flush or vinegar. Thanx

Mounts to my Yanmar, but it's really too big for it. So, trying to get my money back out of it. Bought for $3,300, it works great as it should, No leaks, although it does need a btr. seat. Located in Arkansas, south of Malvern, Ar.. DM for info..1st come, 1st served

Just remember, And make sure you take battery cables off b4 welding. Most important thing to do or else a new battery. Or u might mess starter up also.

I read in the manual, that there is a special plt / mount for the top link on Kubota's. It goes over the rear casting and bolts on under seat area etc.. Maybe someone can use this as a reference, for bh attachment warnings.

If it is the case where this thing is to big for this or the 1720d, that i have. One thing i don't want to do is screw up what i have, a bh, one does have options on. It is sorta heavy and i do worry about it, but not about getting money back on it, that's for sure. I don't believe those...

With about 200lbs in the fel, it rides pretty good at slow speed. One question, should the holes where i have the lifting arms attached to the uppers, in the correct hole ? It's in the upper hole now, is that for max weight or no? Like i said this is going on the 1720d, i believe like the other...

U betcha, lol. will post pix, when it stops raining. Need to get that pole barn started, not a big one(20x30) to put tractors and equip. under. Will have to wait til after they put stint in. Prolly this mid-summer hopefully. I hate having good/nice equip. and leave out covered w / tarp.

It last along time, i have had a diff. and heavier bh on it b4. Plus it has a sub-frame under tractor. So, i think i'll be ok, we sandy soil 12", then into clay here.

No Sir, And boy howdy do i feel like a fool. Had my wife, while she was out near tractor, to spin the pto. In order to dbl make sure it was a cw rotation. I had forgotten, it was in neutral / not engaged, so when she turned it(of course it'll go either way) with the override on shaft she said...

A guy near me has a 98' Kubota 4672 bh, attachment. Bought it with the orig. manual, i want it, if the PTO turn the same. And are the same size as my 1700. I will be putting it on my, 83' 1720d, why i ask is this kinda deal hardly comes my way. And if the pto rotation and size matches my...

I had an older Kubota bh on yanmar 1700 before. But, that was an older one. My question has anyone attached a 98' or in the 90s, kubota bh on yanmar? I read somewhere, that a newer kubota won't fit spline, i don't know. Backhoe attachment is a 4672, 6.5' reach and self contain unit, pump runs...

I know it's been mentioned some where on here. But on my ym1720, it has 9.5 rears and 5-14 front. Can i use the 9.5 on my ym1700 instead of the 8.3-24s rear and 5.3-12s front. Would that throw ratio off. I can't do the rotation match-up, as the 1720 isn't able to roll. Just tired of the rice...

Was used to cut shooting lanes at a deer camp. YM 1720D, the front right seal is leaking and the whole tractor needs cleaned up and tlc. The lift arms was working and the guy said he took plate around pto shaft off, and cleaned a pcs of trash from a hole. Then it started working, but now it...

Dang if I can find it, in my manual or online. Must be going blind, I was thinkin' more like 9/16" ? Am I wrong ? Thanx

I have been considering to find a ym2000 4x4 with bad mtr., and doing a change over in motors. Can this be done and what other frames can i do this? Maybe even an older Ford, 16,17,19 series. Thanx in advance

I believe i read somewhere on here, about a yr, ago. That it is poss., to put a 9-24 tire on a 8.3-24 whl.? YM1700 (grey).

Just picked this up today. Had him put it on a tractor and apply pto, everything was quite and seemed tight. Yanmar 1403 tiller w/ extra tines $600, doesn't have the whls. for rear. The ground i have is a sandy soil until 18", then clay. My question is, do i go ahead and use GL-4 /5--80-90 wt...

NOMA 14hp lawnmower w/43" cut. I was thinking Sears came out with it in the 90s ? It was my dads mower, has 43" deck, B and S mtr.. Model number on mower its self is #C4314052, Serial number #SOO1141324441. I am looking for what i believe starter solenoid, between ing. switch and starter. Is...

Was running good, i think injector pump locked up? Leaks around side and btm. plt. Had just changed fluids, added new exhaust,glowplugs and indicator lamp, cleaned injectors, put a good seat on it,etc.. Had been working it and was making a noise in pump area. Bulldog 285 loader works great. Not...

I have put this in "Hydraulics" on the forum. Ordered from surpluscenter.com, have 2-#9-8759. 2500 psi, retracted lgth. is 24". Rather than paying for two diff. shipping amounts, maybe some one could use. Just arrived yesterday, still in pkg., $140 + shipping. Can take PayPal or Cashiers...

I don't know if this is the right place to put these. I have ordered the wrong cyl., they are from surpluscenter.com . Have two Made in USA and numbers are; 9-8759, 2500 psi., retracted lgth. is 24". I would rather sell than pay for 2-shipping charges, Take $140 + shipping($27-28 ?). Can take...

Ther's a guy with a 1300d 4x4, asking 1600$. I was wondering if the front 4x4 system would work on a ym1700. And if any other parts would be interchangeable w/1700? Thanx for any help.

Per manual #s, ref.no. 27, 33480-code#, and 0380 NO.. What would be the replacement part, either ford or whatever? Also, looking for replacement for REF. NO. 34, 31055 code#- 0030 NO.. Tank ***'y for coolant overflow. Any suggestion appreciated.

I know i've seen it somewhere on here, but can't seem to find it. And i think Winston posted a picture of the way the fel pressure relief line should run. On my 1700, i have the lines ran like Hoyte suggested(cut into the high-press. side). My thing is that when i set my 3pt lever all the way...

My buddies dad used it this yr. to do their garden. It needs 6 tines and some work, thinks it's either a Yanmar ys/rs 1200. Anyone know for sure? I can get it for $100, is it worth it ? thanx Jim

Just called and left mess., waiting for reply. Trailer is hooked up and ready to go get, if still available. $2k it says 2210d, but i don't have a good pic of front axle to really tell.

The motor i was told is a H763. The block has a N860 stamped on it, the head has a N870 stamped. Have taken injectors out of this SD 1603 and plan on replacing glow-plugs and injectors. The price to rebuild them is around $90each, the price that i have found range from $60-$86 new, if they are...

This tractor is a Shibaura SD 1603, with BullDog 285 loader. I have cleaned the screen and ready to add fluid, but there is a line going back to the filler plug. I am not for sure this was used for a pby or not. My thinking on this is because the outlet from valve goes right back into the top...

Looking for the hyd. screen on this tractor, has mtr. stamp of H763. No spin-on type filter, and have read that it is at one or two places. Either it's on top of pump on the rh side near injectors. Or it's in the suction pump line on the lower Lh side, below thermostat housing. I have no...

It's been awhile since i've been on here, busy with working on 2-other tractors. I've bought 2-Shibauras, 1-88' P21F 4x4 and 1-82' SD1602 2x2. The SD1603 has a an injector that needs replacing, and has a Bulldog 285 loader that works great. Instead of building a new mounting plt. in order to...

Found this yesterday, SD-1603 w/1203 hrs.. It needs front tires, injectors, glow-plug indicator, seat and the 4 or 5 lil' dash rubber mounts. Paid $2000 everything works, even the horn(woo-hoo). Now to either find the oem parts or find what ever tractor is comparable. What ford or New Holland...

P21F "IC" Stiger Sp.. Needing wire diagram for the elec. cyl. on the 3pt. hitch, from the cyl. ther is two sets of plug-ins. One plug-in has been cut by some brush(stick), this wire has 4wires(3-white and 1-blue) coming from the cyl. and the other side has 3wires(3-white and 1-blk) from the...

I know nothing about these tractors. This one starts and runs fine, the power over hyd. wiring harness got pulled out. I need to know which wire goes wher., Also need to know where to look for the Serial# or model #. The only thing i see is on the left side, of the trans.. Two plates, bigger...

I know i've seen somewhere about this, but can't find it. Anyways, was running ym1700 scraping some under brush. Temps around 88/93 index outside, and i am in shady area mostly. Oil stick is on full mark(clean oil), oil / filter change awhile back, haven't used tractor but 2-3 times since. And...

Ok, i bought a newer Prince loader valve. Which came pre-adj. at 2000 psi(i guess), and i don't have a oil filled gauge mounted yet. My question is can i adjust it maybe 1/4 -1/2 turn and still be good for 2500-3000 psi. My cylinders are good for around that pressure. Any pictures of or...

Has anyone tried the new disk type hyd. adapters yet? I just recieved mine, and can only get two or three threads on them. I like the cleaness of them , but not sure about haveing press. on that few of threads. Looks like it might have a slight tapper to it. Hose off FEL is standard 3/8 npt...

Ok, like i said i will be getting service/owner man. next month(3rd)retirement/disb.$$. Trying to gather info. from pics./ knowledge from all i can thank you Winston. It has HOI-PRINOE stamped on side. IN/OUT where lines are in 1st pic.? Anyone know about this type valve? Either c68-0 or 088-0...

I bought my ym1700 2wd for $2800 refurbished off a guy, and for extra $400 i got this. o/s cyl. measure 1.75",top measures 21.5"L . Buckets are 1.75 dia.x18.5"L both have i/s rams at 1". No stamped numbers anywhere, can't find any markings either. This tractor runs and operates like a dream...

Just wanted to say hello, been exploring site for a couple of weeks. Decided to join and hopefully broaden my knowledge, of these Yanmars. Just picked up ym1700 and now time to learn. So, thanks in advance of what is to come. Will learn how to post pics, 1st need to find out about hooking up...