Search results

I’ve felt the same way, just make sure you have good light. It’s pretty obvious when it’s wet. You can put it in and take it out as many times as you want, just touch it with your finger and then if your finger comes away wet you’ll get a better feel for what you’re looking for. If it’s dry you...

Looks like it worked itself out. Bled the filter before I got started to day and she ran perfectly all day. Next time I change the fuel filter I’ll do it right. Thanks again for the help! The pictures solved everything.

I think I’m close but not quite there. Following the given guidance I opened the bleeding bolt, #2 in the illustration, and pressed the priming pump. It took many presses to get the air out until only fuel was coming out. The lamp went out and I was back in business for a good hour and it came...

Thanks for the image. I must have air. I’ll loosen #2 and press #1 until I get things correct.

I wonder why it would be saying that. I just took my tank out, drained it, reinstalled it and changed that filter.

Can’t find it in the manual and I can’t figure out why it’s on.

Zero percent chance I’d even consider an electric car or truck. Watched a video not too long ago from a guy who blew up his car rather than pay the $20K+ it was gonna cost to replace the battery. It just doesn’t make sense to go that route for me. How could I pull up to the deer lease and ask...

Never thought I’d be here reporting a problem but I was running my DK5010 today and all of a sudden it turned off. It’s a couple years old and has 207 hours. Hoping it was out of gas despite the tank saying it was 1/4 full I added diesel. Didn’t help. I’d been running it about an hour, pulling...

Thanks!

I want to remove the metal plate and put a chain guard on the front of my 72” EA brush cutter. Seems I heard a while back which one fits but I cannot remember the brand.

I bought a DK5010HS a year ago and couldn’t be happier. Use it on my 13 acres and it does everything I’ve asked. Opted for floor mat, 2 rear remotes, a third function for the FEL, and a roof. It pulls my 6ft cutter effortlessly and picks up trees. Seems strong enough for anything I’ve tried to...

This is way over the top. But I致e learned in life that there are many who just simply cannot read nor accept that sometimes the choices they make impact the things they must do. Life is not always easy. I知 lucky. I live just outside the 1000 mike radius but get free shipping. I knew that going...

Took the survey. 8 minutes, not the 20 it said. However I don’t think it was a well written survey. “Other” answers offered no option to input the “other”and it only asked about Deere, Mahindra, and Kubota. From the questions I answered I wonder how effective this survey will be. I mean, how do...

Did a quick search and didn't see anyone with my particular issue. Hope this thread serves as a catch all for issues and that someone can help me. New DK5010 purchased in January and now with 101 hours. Mostly loader work and haven't used the PTO but a few times. Went to switch it on the other...

Had a tree break and fall over the fence separating my land from the neighbor. The larger broken tree fell over and bent a smaller pecan tree. None of it touched the fence. It had been that way for at least a year and now the pecan has vertical shoots coming off the horizontal. I knew I could...

The long awaited day finally came. Spent some time today busting my grapple cherry. It's fun staying in the seat.

I'm farther south than Galveston. About midway between Freeport and Matagorda as you head down. Tried to post a picture but I keep getting errors. Maybe I'll try Optimized rather than Original. Rain in the forecast 5 of the next 9 days and we got absolutely hammered last night so I can't play...

RichM752 I picked up my half of the "twins" today. Hopefully your west coast shipping won't take too much longer :)

After searching I see there's no posts for the newer DK series tractors. Saw a bunch for the older larger DK's but nothing specific to the DK4510/5010/5510. I see folks have been finding filters on eBay. I searched there and found kits at Greene's but there is not one specific to the DK. Wrote...

Wanted to provide an update just in case anyone ever faces this problem. Received the balls from the dealer and the ones I ordered that were linked. All too big. I've learned that the arms for the DK4510 and DK5010 are Cat 1. I'll attach a picture. The dealer apologized and is sending Cat 1...

Stole these from another durum here. These are the lift arms and then another of a ball on an implement.

I had the quick attach arms option added to my DK 5010 and having a devilish time trying to find the balls to use with them. I may not even be calling them by the right name. Asked the dealer after I ordered the tractor and he said I'd be able to pick them up locally. Been by two different...

Hope this threads not closed. I'm not big on Facebook and would love to get questions answered here. Buying property, perfectly flat 42 acres, been dormant for the better part of a couple decades and is now mostly covered by dense grass, brush, and small trees and I've got tons of time on my...

howdy to all. new member and joining today to say thanks. been lurking these boards for about 6 weeks now and have picked up a wealth of information in the forum. looking to pick up some land in the next month and knowing I'd need tools to work it i found this forum to see what I could learn...