Search results

Don't have a mudflap, but I do have a 6' piece of thick conveyer belt that I can cut out a section and make that work.

Yea, that has been a problem. Will be getting a shorter hitch pin next time I get to the farm supply

I'll give the mud flap a try, sounds a lot easier than trying to fabricate a belly pan. I just finished baling 100 round bales and the hitch pin is catching the hay and balling it up. Your idea should solve that issue.

That a great idea, I'll have to fabricate something like that

I just received my new Mahindra 5155 the other day and started using it to round bale on Friday. I noticed when hooking up the round baler to the drawbar that there is only 10" of clearance under the drawbar bracket. This lack of clearance became an issue while baling because the windrow was...

I do have the parts breakdown and the service manual. I think my frustration was the pricing on the parts. I got the axle apart and found that the 3 retaining bolts that hold the spindle in place snapped allowing the spindle to come out. The three bolt heads stayed in the retaining washer so...

Well, I started my field repair. I removed the front hub on the axle and found that the three bolts that hold the spindle into the hub were sheared. The retaining washer that holds the bolts from backing out were still in place, so I know that the bolts did not back out. They just sheared for...

Today I was out leveling a piece of my property when all or a sudden my left front wheel came off. At first, I thought it might have been the lug nuts that came loose, and the wheel came off the rim, but when I looked at the inside of the tire, I saw a splined shaft still attached to the rim. I...

Sure wish you would of done a video on this. I need to this on my 4550 and I can't find any video or good detailed instructions on how to do this. I have the service manual but it's not very helpful. Does anybody know if there is a video out there on the seal replacement on a Mahindra front axle.

Here is an update on my search for a replacement boot for the tie rod on my Mahindra 4550 I found a pair of silicone boots that fit perfectly for a cost of $3.90 plus $5.20 shipping out of Bulgaria. They took about a month to get here, and I've had them on the tractor for a month testing them...

Mine didn't break while torqueing down a bolt. The ratchet assembly came apart and would not change the direction of the socket. I do admit it is not the highest quality tool but I'm not using it everyday. I only use when something on my tractor need to come apart or tightened. If I really...

I had my 1" drive ratchet break, after owning it for several years, took it the the store and they replaced it no questions asked. Life time warrant

Here is a picture of the boot. The measurements are on the small side are .73 or 18mm. the large side is 1.51 or 38mm. I found something close on e-bay that I ordered but it is coming from Bulgaria. Due to come around Jan 11 to Feb 1 2024. It's made from silicone so I hope it will work. The...

I need to pull the boot off to get measurement and I'll begin my search.

I tore the tie rod boots on my 4550 and need to replace it. Mahindra wants $150.00 for a replacement rubber boot (ouch) Part L1009100012. Does anyone know of an aftermarket part of an alternative I can use. Rubicon International has the entire tie rod assembly with the boot for $112.00...

I had the same issue. Turned out to be the screen in the fuel tank. Had to remove the petcock at the bottom of the tank and clean the screen.

My tractor recently started having a hard starting issue after it sits for about an hour of use. It starts fine when cold. Runs great while doing work around the farm But when I shut it off and do some stuff for about an hour, it either starts right away, run for about a 30 seconds to a minute...

I have the same issue. I'm going to give this a try

No mice in my tractor yet, they seem to liik to live in the boxes on the shelves in the barn. I'm interested to get more info/photos on that 5 gallon trap. Looks like a great option to get rid of these critters

No, at the bottom of my tank there is a fuel shutoff valve that feeds the fuel to the engine. It's so you can shut off fuel from the tank if necessary. I was told that there is a screen on that valve that got plugged with debris in the tank. Check your tank for a valve that goes from the...

My 4550 had an issue like yours. Took it to dealer under warranty. Dealer found that the screen at the tank shutoff valve was pluged up with debris. I believe they just removed the shutoff valve to get to the screen

Here is a link related to your post https://www.tractorbynet.com/forums/threads/mahindra-4540-4550-egr-vent-adaptor-installation-running-cold-fix.446024/

Will doing that require two three way ball valves, one for each side of the hydraulics. Want to this on my tractor so I can operate the tilt and trim on my box blade from my rear remote.

I just got this Spreader from my neighbor. I still functions but could use some TLC. Does anyone know the make and model and if finding parts is possible The only identifying marks is the number 6063-A stamped on the frame. My plan is to use it to spread fertilizer and lime on food plots

One of the quick connects on the third function to the rear of my 4550 Mahindra is leaking. Usually a small puddle overnight. In this something that I can replace the seals/o-ring or do I need to buy a new quick connect. If it can be repaired is there aource for where I can buy these seals of...

First off, I'm very new to tractoring and dealing with a large piece of property. I have a new Mahindra 4550 and plan on maintaining 60 acres, 30 of which is cleared. I don't intend on clearing any more, I just want to keep it maintained I've been agonizing over which grapple to get. I think...

I just purchased 60 acres in the Ozark foothills about 3 months ago of the 60 acres about 40 acres in back is half wooded and half cleared and pretty isolated from out house. It has not been maintained for the past 4years and the weeds are chest high to over my head is places. I知 inclined to...

62 years old and decided I need a change. I have lived in Calif for the past 55 years and now retired. Got tired to Calif and all the issues so the wife and I decided to leave for greener pastures. I bought a house near Salem, Arkansas with 60 acres and plan to live my dream. I've been reading...