Search results

This is for the front, which does have a limited slip, but it’s very easily overcome. And the reason it’s easily overcome is because of this cone/spring washer in the second picture. The ”springiness” in that little cone is the only force that applies those friction discs. What I installed is...

And putting the diff in the freezer overnight and using heat gun to warm the housing really helps. It dropped right back in. My brother was a big help.

Well I finally got it installed. Took me 3 days. Dropped the axle, tore it apart, cleaned everything, assembled and put back together. The bull gear/bevel gear assembly are very heavy. Good grief. Trying to muscle that back on, and aligning the axle shaft took a couple guys. Not too bad of a...

I only have one size. 12” auger seems to work for most things.

I have a 48” Land Pride reverse tiller on my little BX23S. I use it to till an acre. Seems to do the trick.

If they came with anything it would be a limited slip, and a weak one at that. Doesn’t take much to overcome/overpower it.

I’ll start on the install this weekend.

A rock/ stone crusher Would be the absolute first thing I buy if I ever get the money. https://www.iowafarmequipment.com/valentini-tractor-3point-pto-leon-rock-crushers.html

I couldn’t find one anywhere in stock either. Called the manufacturer and they didn’t have an ETA on one either. Neil Messick actually had one sitting on his desk the company gave him to make a video on. Neil sold it to me for 1/2 price. $300 shipped.

I have a Detroit Locker in the rear and an Eaton E-locker in the front of my ‘74 power dodge wagon. That totally transformed the way the truck wheels Off road. For my tractor, I know this will be an excellent upgrade. Getting stuck and then hitting the front wheel assist button only to have one...

Well. I have one on order. Should be here by Saturday. I’ll update some more when I get it installed. Should be able to install that myself, I’ve done similar tasks, so no problem for me. I won’t be using 4 wheel drive on pavement. There’s no need. Some of you guys are funny. Lol

NO. I wouldn’t. I have no desire to own anything EV related.

I REALLY like my BX23S.

Thanks for the reply. Today I got the wheels delivered. The center register hole was 6” like was mentioned and the 8 on 8” lug pattern was the same. The only thing was the holes in the Kubota rim were the next size larger, but the taper on the lug nuts still were able to center the wheel...

I have an old IH 656 diesel and I need a tire. It currently has 18.4-26 tires. I’ve located a new set of 18.4-28 wheels and tires complete with adjustable spin out wheels, for $500. They came off a larger Kubota 100HP M series tractor. My question is the 8 lug pattern pretty universal? I...

These are Gearmore cylinders. In service on my M7060 for 6 months until I got my FitRite units. They have more shelf wear than anything from me moving them around over the years. Looking to get $625 shipped. Save over half from new. Check at Messicks...

I have a Gearmore 4G4 series 84” hydraulic ripper shanks behind my Kubota M7060. It weighs 1400 lbs.

Screw ‘em. They’d hate to see how many sets of tires I go through on my ‘68 Barracuda when I burn ’em off. Lol. Solid roller cam high strung small block and a 4 speed, very fun! we can still have fun out here in the land of the communists.

I use it to paint fence boards, posts I sink into the ground, coatings for the tops and bottoms of my wood floored trailer. Etc.

Newly released locker for select Kubota models. I may get one for my M7060. Pretty cool. TL-KUBOTA - TORQ Locker for Kubota Tractors | Locking Differential | Aussie Locker By Torq Masters

I have this unknown make hydraulic pump on an old Dozer. I had to take it apart for cleaning. I’m getting ready to assemble it but I need to make some gaskets. The ones that were on it were .004 thousandths thick. I imagine they are also used for setting up and establishing gear-to-case...

I was told NOT to do this by the One and Only no less, but I did it anyway. My rear blade came with the 3 hydraulics and one manual selector valve already installed. I thought I would have the great idea and buy ANOTHER manual selector valve ($170) and the fittings and some hose (another $130)...

So here lies an old Cletrac that belonged to my girlfriend's dad. It WAS running 20 some odd years ago, but he parked it right here and that was it, I don't know what could be wrong with it. He sadly passed away a few years ago. After bringing his old Oliver 550 back to life that sat for just...

Well, I did it. I bought me a LandPride RBT 4596 for my M7060. I was looking for a used one for quite some time with no luck. Here in the Bay Area, CA we sure have it rough sometimes, slim pickins. ;( I had to pay **** near retail, but I have it now and it's mine. Just wait, one will show up...

This is part of my driveway. Its got some bad ruts in it. I have a 7 foot hydraulic box blade, probably weighs 12-1300 lbs, behind an M7060 with top-N-tilt. I don't have a heavy rear blade like the LandPride RBT4596, but I'd love to get one eventually. Its really hard, rocks make for a bouncy...

I have found many uses for my tractor, and although I don't use it every day, it's sure nice to have when I do need it!

Congrats! That'll be a fun car! I still have my old Mopars, '68 Fastback Barracuda, and a '70 Dart. Both projects. LOL.

I'm looking at Diamond C gravity tilt deck equipment trailers to haul my M7060. From loader to box blade it's almost 20 ft long. I will also use the trailer for cars, and trucks. I am over carrying heavy ramps, that is why I want a tilt deck, and these seem to operate very nicely. The options...

Hi I have been asked to disc this 7 acre field. The weeds are about knee height. I don't have a disc, however the gentleman has one on site I could use, if my tractor can pull it. The disc's measures 21" diameter, almost 7 feet wide. My tractor is M7060HD12 with R-4's.

Is there a source for a greasable CAT 2 3PH pin? Having hydraulic top n tilt, and a heavy box blade on 100% of the time, I constantly use and adjust the top link. would it make sense to have those lower pins greasable, or forget about it?

I'm rebuilding these power steering rams you see pictured, they are not typically meant to be rebuilt, you throw them away and buy new ones. But new ones are not available, so what I have to do is cut them open, replace the inners, and weld them back up. :) The rods were bent, so I had new...

Hi. This is a power steering cylinder off my Oliver tractor. It is a welded cylinder not typically rebuildable. They are not available new so I cut it apart in an effort to rebuild it. I can get the front seal kit for it which is still available. What I need is a new ram/piston as this one is...

Can someone tell me what kind of plow this is specifically, and maybe provide a link to get something similar? I'd like something just like this for my little oliver as well. I am a newbie to plowing/discing. Thank you! :) Oliver 55 plowing - YouTube

Well not sure the correct terminology yet but my aunt needed her 4 acres lightly ripped she is gonna spread hay seed. I've never done something like this before and I didn't have the correct equipment so I just put the scarifiers down on my box blade and did the whole dang field this way. LOL. I...

nicely done!!

Tha'ts where a set of Ken's bolt on hooks come in handy!!

Mowing The Hedge - YouTube

I know nothing about these tractors, but it's been sitting for 15-20 years. Today I got a wild hair on my backside and thought I would try to get it running. I pulled the plugs, oiled the cylinders, aired up the tires and pulled it out with my truck. It rolled freely, so I had my wife put it in...

I'll try to explain the best I can...I'm having a small issue with my GearMore box scraper's bushings coming out of the hole and wobbling around on the Cat.2 pin, which creates excessive play, in which the box scraper moves around. Here's a couple pics to show what I mean. Is there a way to...

I've ordered a Construction Attachments tooth bar, a McMillen hydraulic post hole digger with 12" auger bit, and now a wicked grapple that should be delivered the week after Thanksgiving, all from E.A. I found their shipping policies to be clear, and I knew I was out of the "free zone" limits...

So I'm building a 24x24x10' tall pole barn with a 6&12 pitch roof. I just barely cleared an area and did the layout. I'm undecided if I should leave the ground as is and do a gravel floor, or do a concrete slab. If I do a slab, which I really do want, the elevation rises 2 feet from right to the...

I have quite a few fence posts to put in, some trees to plant, and a pole barn to build. I might have went overkill for my application, and I may only use it every couple months, but I decided on a McMillen X1475 hydraulic auger. Thanks to Everything Attachments for recommending the correct one...

the challenger is one fine car. you made an excellent choice!

I absolutely say get the Challenger SRT. Or nothing less than a 392 Scat Pack. I've marveled over those since the day they came out. They look the best, but if I were going to get a Mustang, it would be the Mustang GT350. I'm not even interested in the Camaros at all. Tesla's dont impress me...

Okay, so I might get a "I told ya so." I just bought a new M7060 using Kubota's Top-N-Tilt, and 3 remotes. I asked the dealer for 2 of the remotes to be a float valve, for the TnT cylinders, but he insisted all should be Self Cancelling Detent valves (SCD), as that is what they say and should...

Hi there. I'm looking to buy a tractor, never owned one, or have too much seat time behind one, mainly bobcat skid steers at work, but need a conventional FEL tractor. So a google search on "which kind to buy" brought me to TBN! My girlfriend and I live on her parents 400 acre piece of property...

Hello. newbie here! I'm looking to buy a tractor, never owned one, or have too much seat time behind one, mainly bobcat skid steers at work, but need a conventional FEL tractor. So a google search on "which kind to buy" brought me to TBN! My girlfriend and I live on her parents 400 acre piece...