Search results

I'm trying to remove the injection pump off my Iseki. It has 3 bolts that are off and lines to head are removed. It will slide out 1/4 inch and thats it. It also can be rotated about 1/2 inch left or right for adjustment. Need to remove pump to replace glow plugs or will have to remove head...

I have a Kioti CK 20 with one set of rear remotes (from what I understand it can only support one). Have hydraulic thumb on bucket and backhoe attachment and hydraulic cylinder on 3 point hitch. I can only use one attachment a time but would like to keep from getting off tractor and unhooking...

What a great Thanksgiving weekend we had it central Virginia, in the high sixtys yesterday and above 70 today. Took a few pictures of my green grass that I have worked hard to get into good shape. We moved in 5 years ago this month and started with mostly weeds. Had a great time watching it...

This is an update from an older post that I submitted a few days ago. My good friend can take the rubbing that he will get from these photos. We have the Chevy strapped down with 3500 lb tie downs on each wheel. On the front, a 10,000 lb strap, in the rear chains from the bump stops to the...

A good friend of mine has a 06 Chevy 2500 diesel that weighs about 6700 lbs. He has had transmission problems and needs his truck towed about 200 miles to a shop that will install built tranny. I have a 18 foot dove tail car hauler with 7000 lb axels. The trailer weight is 2026 lbs. That...

Going to look at KB 2365 today, it is attached to a CK 25. Can I use his sub frame to attach to my CK 20 or will this require a additional purchase for my tractor? Thanks!! Eddie

Going to look at 2004 KB 2365 for my CK 20. It's on craiglist and would like to know if $2000.00 is a good value if in good shape. Comes with 18" bucket. Thanks!! Eddie

Had two (2) 3 point quick hitches, one from Harbour Freight, the other from Speedco. Tired of hooking up my equipment with either one of them. Purchased Pat's easy system and would like to know if anyone has been able to use a draw bar with Pat's system? Thanks for your comments. Eddie

Has anyone removed their seat from a CK20? We had a good snow here on Christmas day, I went down and cleaned seat off except for a thin sheet of ice. I hit the ice sheet with my fist and cracked my 3 year old seat. I would like to remove and recover with marine grade vinyl. Eddie

Made my first trailer mistake this morning. I have a 12' landscape trailer and a 18' dove tail equipment trailer. The 12 footer uses a 2" ball and the 18 footer uses a 2 5/16" inch ball. About 2 weeks a ago used the smaller trailer to take old piano to Salvation Army. Unhooked trailer and...

Have 2007 CK 20, purchased new in Dec 2007. Tractor has 194 hrs. I have been noticing the temp gauge moving out of the safe zone the past 3-4 times I have used. It has never gotten to the red unsafe level, but it does not miss it by much. I have changed and checked oil level. Have new air...

Purchased GT5000 last night. Would like to know if anyone has a manual in PDF format that they could email me. Thanks in advance. Eddie

I have purchased 2 mini systems, both 12,000 btu for a unfinished room and a garage. The lineset, electrical & drain runs on the outside of the house and needs to be protected from the elements. There is a system called slimduct that can be purchased to protect the lineset. It is very...

Have a CK20 and would like to add tilt cylinder to the 3 point hitch. Have any of you guys done this and if so what length hydraluic cylinder did you use. Also was it a single action or double action cylinder. I have a little angle to my drive and hate getting off tractor to adjust. Thanks...

Need new seal for my PTO shaft (TU 1700). I have found a couple different sizes. Would like to know which is correct. 1. 34 x 55 x 8 or 2. 35 x 55 x 8 Thanks in advance. Eddie

I added a thumb to my bucket. Went for a test and bent the top of my bucket about 2-3 inches up. Tried attaching a chain and using bucket to pull back down with no luck. Just looking for some ideas before taking to welding shop and having entire top cut and replaced. Eddie

Ok, had my rear remotes installed, have bucket thumb. Need to know what size hose 3/8" or 1/2" to torque tube? After getting to tube, is the short hose smaller that goes into cylinder? Thanks Eddie

I know this is an easy answer for many of you. Need to know how many rear remotes I will need to operate a grapple or thumb attachment? Rick, if you happen to read this pm a quote for the quick attachment you are having made for a CK20. Thanks Eddie

With the price of ferterlizer going thru the roof, would like to know if anyone has used liquid ferterlizer for their fields/lawns, other than large farms which I know spray. I can purchase 2 1/2 gals of 10-10-10 at Tractor Supply. It states on the label that 14oz will cover 1000 square feet...

Have CK20 gear, when starting tractor today (38 hrs), noticed the 3 point arms were in the highest postion. Moved the lever to down to the lowest postion and arms did not move. Tried to push them down with no success. Any comments would be appreciated. Close to 50 hrs service, but still...

Stopped to see a friend of mine last week while he was installing a gararge door. The man who owned the home was a salesman for Deere. After talking with him for a few minutes, he was telling me about a John Deere line grass seed that was very good. I live in central VA, and would like to...

I have a CK20 with approx. 12 hrs. I was using only the loader only until I picked up a 4' bush hog yesterday. My concerns are when clutch is depressed when cutter is engaged, I hear a clattering noise in the clutch/PTO area underneath the tractor. I was so concerned, I loaded on trailer and...

Purchased new Kioti CK20 last month and picked up new 48" Howse Rotary Cutter today. Got it home and unloaded, went to read operators manual before operation and noticed on first page that front and rear chain guards are standard equipment on all rotary cutters. There were no chain guards on...

After a week or two of decision making between the CK20 or CK25, I am now the proud owner of the CK20 gear, loaded rear tires, with KL120 loader (new type). Also purchased 4' Howse cutter. Total price 12,500 and 323 per month (zero interest) with 1,000 down for 3 years. Can't wait to play!!:o

Received quote today for CK 20 with industrial tires, ROPS, KL120 front end loader w/50" bucket. Finance price w/hst trans 13,100. Finance Price w/gear 11,950. All opinions welcome.

I have a new freeze plug heater for my TU 1700. Would like to know which plug to knock out and use? Also which way does the element need to point? Thanks in advance. Eddie

I have a TU 1700 and this afternoon, turned switch to heat glow plugs for a 10-15 second warm-up as normal. After about 5 seconds wire started to turn red and I then noticed very hot glowing red and shortly thereafter burnt indicator wire. What went wrong? and can I find a wire at local...

I guess I should read a little more before starting something I know very little about. Purchased TU 1700 about a month ago, went off to school for 3 weeks and ordered new fuel filter while gone. I installed new filter, but did not fill bowl. I know for sure I have air in my lines. No black...

Just purchased TU 1700 this past Friday. Started right up first time removing it from trailer. Turing key to left heats resister to a glowing red in about 30-40 sec. Glow plug bar has about 9 volts across the bar. Contacted seller he stated full throttle then back off 1/4. Live in VA and...