Search results

I have been using the WD trick this season and so far no issues! Although never had the welding problem!

YKYO, when the only hangers you had in your apartment Were! 😂😂😂

That’s exactly what me and my neighbor did just lay the wire down and drop the tree!🌲

Was Willow springs in Bakersfield? I used to race @ Famoso raceway for 25 seasons until we retired and moved to Oregon!

One of my favorites from that album (Running On Empty) if you’re going to listen to that song for the first time, stay to the end !!!

Thanks for the 😂😂😂!

A fake one!🤣

That show is so funny 😆, and no canned laughter!!!👍🏻☮️✌🏻

Now that’s funny right there!!!😂🤣

That and much more!!!🤣🤣

How about this one?

🤣🤣🤣👍🏻

YKYAOW…..you are older then the Pope! 🤣🤣

Thanks for enlightening me! How can I forget something so important!🤣☮️✌🏻

Was that Ike?

The freeway is about 1 &1/2 miles away! The house is 63 years old, someone did a lot of work over the years, we did add a family/ game room! It was a typical tract home, popcorn ceilings dark stained doors and birch cabs. The addition was 5K in the late sixties!

I just checked on Zillow, my first house I bought @21 in Milpitas ca. in 1967 was $24,500 check out the price now and the property tax is over 20 large! WOW

I must say that’s a lot of sq.ft. to heat!

When I was a kid maybe 12 or 13 we used to jump parking meters in the Bronx! It didn’t hurt that I was almost 6’ tall! ☮️✌🏻

I wish that was the problem! What happened was when I was banging my wedges, I didn’t move the saw far enough away from the kill zone and the tree 🌲 fell on the saw! The Fir was over 100’, it’s a good thing there was a low spot or I would be the proud owner of a new saw🤣 let that be a lesson to...

Hopefully she’s had a pair for years!😂😂😂

I would show you mine but my saw would not cooperate, Fortunately it just bent the bar and cracked the kick back handle! New bar $60. And some JB weld and back it yesterday!!!👍🏻

You had to draw the whole clock? I only had to draw the face!🤣 My clock came out ok but could only get 2 of the 3😒.

At least you woke up! 😂😂

YKYO, when you wake up to pee, and you realize you already did it in the bed 🛌. An old joke, I forgot where I heard it! 😂🤣

Somebody did their homework!!! Thank you!

I’ll change the subject matter! I was felling a dead Doug fir🌲 well over 100’ and 30+” at the stump and didn’t move my saw far enough away I got extremely fortunate in that it only bent the bar, and cracked the the kick back lever. Replaced the bar and epoxied the lever, all better now! Borrowed...

You have more patience than most, my friend!👍🏻

I don’t get them anymore!……..Thank you Muhammad! 👍🏻🥇

We were told we were royalty, when we scanned our new card and it shows your picture and how long we have been a member, 35 years. 👍🏻

YKYO, when the last scooter you rode was a vesper!😂😂😀

Don’t forget to bring a sidearm just in case! Remember, when seconds count, Police are only minutes away!

Being an old drag racer, I’ve seen that video many times! Way back when, I remember seeing that car in action along with Miss Hurst, Linda Vaugh👍🏻😂🩷

We think if anyone can get to the bottom of the issue, it is you! Good luck my friend!🙏🏻🙏🏻🙏🏻

That’s really the only way to mix it, we’ve been doing it that way for years!

WHAT?

Sorry for your loss!

YKYO, when you don’t know who, The 'Hawk Tuah' Girl Is 😂😂

Actually I did that as a joke! I forgot to put in the laughing emoji 😂😂😂

Me too +1

Does this mean I’m old!

Ten years ago I purchased a 22 ton Dirty Hand Tools splitter, towed it home using only city roads , never going over 40mph Got home in one piece 22miles later bearings never got hot! Good luck bro!🚜

I can’t say (they might be watching)🤣

Anyone ever see a white Deer before? This is a first for us, lived here for 10 years!

I use paint pens, have had great luck with them. I got the idea from tractor Mike!

I have never thought about doing that, but I just did that to all my cordless battery chargers and plug ends. All my charges are on the same shelf, what a mess!😂😂👍🏻

Good for you, one can never have too much firewood!🌲🌲🌲🌲🌲👍🏻

Like that idea of the mirror trick! If you don’t mind I’d like to use it!😂😂☮️✌🏻

We have a Generac 22KW 2014 air cooled in the Pacific Northwest. We had to evacuate for 11 days because of fire it ran the whole time except for oil check every few days, and never an issue with overheating and it was in the summer months, it runs on propane! Still has the original battery!👍🏻☮️✌🏻

So what did you have for dessert bro!😂

You and me both! Did it look something like this? Circa 1980!😂☮️✌🏻

How about bro? I use it a lot, I’m 78 bro!😂☮️✌🏻

You’re right, but there was so much of it, it was almost everywhere!

We saw that segment on the news recently! That was quite the haul! We’re glad they are going to send him to jail (I hope) Portland just spent over 1 million cleaning up that f-ing mess!!!

What a fine looking couple!👍🏻☮️✌🏻

Damn, you look so young!😂☮️✌🏻

“When I finish spraying paint, I always pull the nozzle off the paint can and then pull the nozzle off a can of carb cleaner. Then, I put the paint nozzle on the carb cleaner can (or hold it tightly over the tube sticking out the top) with a rag around it and spray a shot of carb cleaner through...

I saw diesel for under $3.40 yesterday in Portland Oregon!👍🏻

“Before you know it, the Super Bowl is going to be pay per view like boxing matches” Your so right bro!🏈🏈🏈

Not always, my mother in law never looked this good at 78!

Have you thought about getting a magnetic tranny drain plug? It’s amazing what it will pick up!

We buy from Wild Hair tree farm On Wildcat! Are you familiar with them?

Maybe Muhammad can get involved with this very annoying issue? What say Muhammad?👍🏻

Has anyone noticed the pop up adds that take up about one third of the page and are extremely annoying?

We live in the hills of Estacada and paid the same price for our family Christmas tree for the last four years at a locally owned farm!🌲🌲🌲☮️✌🏻

I hope you’re right! We were under the impression that groceries, fuel and a host of other things were going to be be cut in half, now we hear that statement is being walked back!👎🏻

My suggestion is call the company that made the tank and talk to a tech person! Let us know the outcome! ☮️

My wife got 10 years out of her 2015 Jeep wrangler battery, we were very surprised! She doesn’t use it much only 34K still has the original air in the tires!😂☮️✌🏻

I haven’t read many of the posts but it looks like the country got what it asked for!

Good luck with the repairs, I feel your pain!😥

Hope you’re right!☮️✌🏻

Sorry for your loss bro! 🙏🏻😥

I remember that game, but not sure if I played it!

I remember the first one I saw! AR WAS HERE! 😂☮️✌🏻

That sounds like we went to the same school!😂😂😂☮️✌🏻

YKYO, when you remember practicing the duck & cover in Elementary school! ☮️✌🏻

We just saw, The Birdman Of Alcatraz this morning, haven’t seen this since the sixties!👍🏻 What a great movie! Burt Lancaster one of the all time greatest actors! IMHO!👍🏻

Inquiring minds want to know!👍🏻

You’re right, I was just being nice to the networks!😂😂😂

Do you all think the big one will happen in the next 15 years?

That man sure knows how to interview people!!!

We use Pandora it’s free with some commercials. Mine is on my iPad and use Bluetooth to the truck radio and ear buds when using tractor and splitter!👍🏻

So true! The amount of commercials is crazy! Sometimes in a 30 minute show almost 8 minutes of commercials!👎🏻👎🏻👎🏻

I got one “ Land Of The Giants “ One of my favorites!☮️✌🏻 Now, that’s hot!

For your viewing pleasure!

Sky king!

Does anyone remember watching Andy’s gang around 1955 or so, or was it just a New York show?

Send them to me, I’ll take care of that major problem!

I found the answer to your question! Travelers Cheques have been a timeless addition to the world traveler’s carry-on for over 130 years. While new Travelers Cheques are no longer issued, your Cheques remain backed by American Express and have no expiration date. 👍🏻☮️✌🏻

Nice job! What kind of compression #.

Our Costco ( Clackamas Oregon) Just started using a card scanner at the entrance recently. Very interesting, yeah I know!😂😂😂

The one thing I remember about that movie. Me and my friend got rained out at a drag race in Palmdale Ca. Went to the Airplane movie, when I woke up I looked over at John and he was sound asleep.😂😂😂

Thanks for reminding me of the list!👍🏻

YKYO, When you remember the manual credit card machine with the carbon between the soft and hard copy, that would get thrown away ( usually) with all the information on it! My OLDER brother reminded me of that. 😂😂😂

UH-OH 😂

Our garbage pickup takes our trash in cans, used oil in gl. milk cartons, cardboard & paper, cans & plastic, & glass, batteries all in separate bins every week, we live in the boondocks and it’s ONLY $43.a month! 🗑️🗑️🗑️ 😂

Comment of the day award!👍🏻🏆

Now that’s disgusting!!!💩

Those outhouses can be brutal!

Like they say “ if you want it done right then do it yourself “👍🏻

😂😂😂😂😂😂😂😂😂

Thanks for the correction! It’s been many years since I had that engine built! Where did you get the knowledge to build your own engines? Have fun with the build, I can tell you really enjoy doing it!👍🏻☮️✌🏻

I had a Dart block based on the Ford 351 Windsor, if I remember correctly 4”x4” = 427 about 650hp, those strokers like you say are torque monsters, and make power at only 6500rpm (mine) best et 10.08 @ 132, mustang with me in it 3,150 lbs!

Good neighbors are not always hard to find! We’ve been in our house 🏠 in Oregon for ten years now. Our neighbors of 8 years are some of the best people we know! They are both in their 30s with 2 kids 3 dogs and 3 horses! We are always ready to help each other. I can’t wait for the snow so I can...

I found the problem. I was messing with the ignition switch and when I would start it and move the key slightly to the right the light would come on as before, so I gave it a shot of WD 40 and everything worked as before!👍🏻 Thanks for your help bro!☮️✌🏻

That’s ridiculous 12 sheets for 1,000.$$👎🏻

Hi all, I’ve owned a 2005 Kioti CK25 HST for ten years 1,300 hrs, when I go to start cold the glow plug light takes about 9 seconds to turn off then I start it the light comes back on then turns off after another 9 seconds, but lately when cold instead of 9 seconds after start the light goes off...

I will have to look. What section would I look at?

Does it hurt anything to use it like that until a find the problem?

Thanks for your reply! So if I get your response right if one glow plug is not working, the timer would still stay on for 9 seconds when first starting?

Hi all, I’ve owned a 2005 Kioti CK25 HST for ten years 1,300 hrs, when I go to start cold the glow plug light takes about 9 seconds to turn off then I start it the light comes back on then turns off after another 9 seconds, but lately when cold instead of 9 seconds after start the light goes off...

You’re the man!

I use Preston green concentrated with a first flush using water only and let it run for at least 5 minutes. Then the flush according to instructions and then flush until water runs clear and fill w/50-50 solution!

I just had a dying Hemlock dropped by professionals. It was dying from the top down, about 25’. Chipped and buck up the only thing I did was use the chainsaw to 1/4 the rounds, for ease of handling! A good start for next years heating!

That’s funny!😂😂

I’m from the Bronx……Loved that movie, especially the bar fight!!👍🏻

Another great Steve McGueen

The incredible shrinking man! 1957

Well done! I like the angle iron and the metal skin! And of course the paint job.😂

This is what I did maybe 5 years ago, all I did was add another support after using it for awhile! I don’t weld so I had to make do! It’s a Dirty Hand tools 22 ton!

I stand corrected by my brother, he said it was his game not mine! He always had the last word…things never change!😂😂😂 I know my OLDER BROTHER will read this!!!

Don’t forget the hot plate! (Old school))😂😂

Wow, That’s a s#it load of wood right there! How much did you pay for that unit?

I had one!

YKYO when you remember going into the local mom & pop grocery store and seeing someone checking the eggs with a candle for any baby chicks inside! ☮️✌🏻

Well my picture is not as interesting as Runner, but everything went as planned for the head gasket replacement and tractor has been back at work for the last week running great thanks to Scott ( master diesel mechanic)!👍🏻☮️✌🏻 150+ pieces per trip to the shed!

Can you post a picture for us visual guys and gals? Thanks👍🏻

$13? In some places you can’t even get a burger for $13!😂

Or they say “ back so soon”

Update on the blown head gasket. Getting it buttoned up today tightening the valve over bolts and heard a pop the valve cover has a slight hairline crack. So off to my welder, Tim said he will have it done in the morning after letting it soak overnight hopefully it’s cast aluminum and not...

Yes it is a game show! But he is a professional gambler! Google him!

Thank you for the quick reply!

Can anyone here post a link for the Head bolt torque specs for a 2005 kioti CK25 HST? Many thanks!

Smacked your bag…..too funny! Nails in or nails out?😂😂

It turned out to be a blown head gasket. 20 years and 1300 hours! Will post results when my buddy comes by to help assemble. He is a master diesel mechanic!!!👍🏻

My wood and latest tractor picture Got a call 📞 yesterday that part’s are in ( only took six days 👍🏻) Need to get the wood to the shed, the rains are coming!

How about ……James Holzhauer ( Jeopardy Champ )👍🏻😂😂

“As a matter of fact, l take breaks waiting for the break.” Great comment bro!👍🏻

I always tip the automatic car wash people..why, because I used to do that same job in the sixties! 😂☮️✌🏻

Sweet

How about when you’ve already looked there before and didn’t see it!😂😂

Great build! We know you went through some tough times with the extra headaches and $$, but you will enjoy it for many years to come!👍🏻☮️✌🏻

So true!

Good news! It only took my friend 2 hours to get the head off, if was a leaking head gasket! I called a Kioti dealer and they wanted 5 large to do the job, including resurfacing and valve seals,WTF is up with that price?

He is I was just messing with you people! Good catch! 👍🏻

Hey AaronD81, can you send me a link to the manual you have? I can’t seem to find it! Thank you. We’re getting ready to start the tear down! Wish us luck that it’s a head gasket!🤞🏻

Hahaha.😂

We never miss a new show! We don’t watch the celebrity version! It will be interesting to see how, Ryan Seacrest does as the new host!

Does it still count if wal-mart gave them out for free?

That’s the same problem I have it pressurized the cooling system and was spitting coolant out the overflow tube on the reservoir. Going to pull the head on Friday Having a diesel mechanic friend of mine help, or should I say I’ll help him!😂 I’ll post the results good or bad! My friend says...

It’s getting there!

Thanks for the reply. Did you have any head work done and did you find what caused the problem?

Hi all, I have a blown head gasket. Just wondering if anyone has replaced one and how much of a job it is? It’s a 2005 CK25 HST with 1300 hrs.

I agree 100%!☮️✌🏻

They had no steel or oil to speak of at the time. That was the driving reason for their aggressiveness in the first place. Thanks for the history lesson.👍🏻 I don’t think I ever knew that!🇺🇸☮️👍🏻

We have a Kioti ck25 HST we always have the tractor off and the pto in neutral! I took tractor Mikes advice and mark the coupling with a paint pen, makes it so much easier to hookup!

I was wondering the same thing!😂

It seems to me that you sure have done your homework!👍🏻 Sorry, couldn’t help myself!😂😂

It’s actually a carryall but it works great for bringing firewood to the woodshed for the winter. That’s our main heat. We burn about 8 cords a year!

Thanks for the update!👍🏻

Thanks for the reply. What I did was pull the line from the fuel pump and drained it out that way. I wanted to change that main line but couldn’t get access to the bottom of the tank, so just changed all the other lines!

I know exactly what you mean!😂

I like that idea! I’ll have to try that instead of Quik Start!👍🏻

Good call on the heads!

I know it sounds obvious, but we always keep 3 cans of starter fluid around, two in the barn and one in the garage. Cheap insurance!

Bummer bro! You did good! I used a set of AFR 202 heads years ago on my 13 to 1 427sb ford, perfect out of the box!Good luck with whatever set you get!

Good luck!👍🏻

Hi all, I’m going to replace my 20 year old fuel lines after finding my filter almost full of what looks like pieces of interior fuel lines on my 2005 CK25 HST. My question is how to go about it the easiest way from draining tank ( only about 2 gl. Left) I looked on line for YouTube video, no...

I’m a Ford guy. But you my fellow car guy get two big!

Thanks for the info!

Hi all. Just wondering what you intelligent people think about TSC Traveller DEF Diesel Exhaust Fluid? Thinking about changing brands from peak brand to Traveller for my 6.7 2014 super duty Ford!☮️👍🏻

Years ago my daughter had a sign on her desk ( don’t piss me off, I haven’t had my coffee yet)

I have that one also, but forgot how to use it!😂😂😂👍🏻

I smoked for 8 years👎🏻 Haven’t smoked🚬 for 53 years!👍🏻

I would like a couple of freebies, or I will turn you into the gas can Police!😂😂😂

Nice job! If you let me work in your shop for a couple of days you won’t be able too find anything!😂 You are very organized bro!

When I started smoking, vending machines weren’t invented yet!😂😂😂

How about when cigarettes cost.25 cents a pack and didn’t have the Surgeon General’s warning on the side? Damn I’m old. ☮️✌🏻

When I was in elementary school, we had ink well holes in our desks, some even still has the glass well’s. We used the ink cartridges in our Sheaffer pens! Happy Saturday all!

Thanks to MossRoad I have less time now. My favorite is wait for it. Dick Pound (born 1942), Canadian swimming champion and first president of the World Anti-Doping Agency,…..😂

Question…How did the name Richard ever get shortened to D*ick?

you got that right!😂😂

I just thought that I haven’t blown mine out for maybe 5 years or so, but I do remove the screens after each use of the BH and after using the chipper, temp gauge has never gotten past the suggested halfway point! ☮️✌🏻

Great idea! It not to hard to do that!

Just a thought…..Can you go to a thermostat that opens sooner, like maybe 10 degrees? I had an issue years ago with a drag car that would run hotter than I wanted, so I went to a 160 thermostat from a 180 that did the trick. It had a 4 row aluminum radiator cooling a 427 sb with 650+ hp.

Sounds like you’re on the right track bro!

So does it run any cooler?

I’ve done too many to list!😂 Here’s one. Getting high in the smoking section of a commercial flight in 1979!

Very true!

I didn’t mean to remove anything just drive around without putting any strain on the motor!

Have you tried just driving around without using any implements and see how the temperature does?

Made our day!👍🏻

That’s so cute plops her paw on the table. 👍🏻😂😂

Did you get a refund? Did you take pictures?👎🏻😟