Search results

Hmmmm that is pretty much exactly the symptoms I was experiencing however

I actually haven’t checked the tensioner since replacing it. I did the belt and pulley just out of precaution after buying it, because I had no idea when they were last done. I cracked into there today and got it all snugged up. Figured that was my easiest first step anyway! I gave it a little...

No noises, just very slow to lift or tilt up. Like there kids no power, but drive is still fine.

Hey Guys - Getting an odd intermittent problem on my 2014 G series. My arm lift and tilt up are become very slow - no power to lift at times - but the problem has come and gone intermittently. Everything tilts down / lowers just fine. I also have no problem with drive. Is there something...

Hey Laurence! I’m in Ontario, just north Orangeville! Where abouts are you?

Sorry guys - I wasn’t getting the updates for the responses for some reason! I’ll look up those part numbers and see if I can find the links. I got it all just down at Princess Auto!

Hey Guys - Decided to make use of this no snow time to finally go ahead with upgrading to some of the lights to LED kits. I had some burnt bulbs and a damaged housing already and found some pretty good Black Friday deals down at Princess Auto. I ended up going with a light bar across the front...

I pulled and carefully but thoroughly cleaned up the Mass Airflow Sensor and the Intake Manifold Pressure sensor today. I’ll give it a run tomorrow and see how it goes.

Hmmmm my ECU is pretty much brand new. But I will take a peak and see if there’s anything that’s built up around it since I installed it. Thanks for the suggestion!

Sorry I should have mentioned that in the OP. It’s a 2014 G series

Airflow Sensor?

This one has got me stumped. I’m getting Error Code 108-03 Barometric Pressure Fault if I run the machine somewhat hard - once it warms up. If it shut it down and let things cool off a little, it goes away. When the code comes up there is a noticeable decrease in engine performance. All I...

Curious if anyone has added a strobe light to their TC? I’m spending more time in the road helping neighbours clear their plow berms and we get lots of blowing snow / low visibility conditions. Thinking something a little more than 4-ways on our country road may be a good idea. I see...

Hey Guys! Just wanted to provide a quick update on where I ended up with this issue. I was able to use the machine wit traction control disabled without and issue until I began getting an intermittent 66-04 error code (no ECU communication). Until one day everything stopped dead.. on the road…...

Dealer was able to lookup the code for me. Speed sensor related. He suggested it could either be lack of signal or issue at the wiring harness.

Thank you again for your help @ruffdog. I think you’re definitely on to something with the brake calibration. I’ve been reading back through some other posts regarding brakes dragging, bogging and definitely sounds like something I need to get done. I also came across someone saying their...

UPDATE: Still no luck on diagnosing the problem - but I did get an error code while trying a test drive today. Code was 50-89. Can’t seem to find anywhere what that might be related to.

I figured with the limited hours I’d be putting on, fluids / filters etc should have a pretty good life span - so just decided to get them all straight from my local bobcat dealer. I have a feeling it is brakes related… getting the machine in is going to be a process. Thanks for the...

Unfortunately not the case, but thanks for the suggestion!

Hey Guys! I purchased a used 2014 5600 G-Series that I've been working on as it was overdue for a little love! This will be for home property use for myself, so it will also be a bit of a project to get it back into better shape! One of the issues that has come up so far, is that the machine is...

Hi Laurence! Thanks for such a quick answer! I’m still trying to figure out the ‘versions’. Sorry like I said pretty new to the Toolcat gang! It’s a 2014 model. It seems to pop off pretty instantly. I will take a closer look for debris and see if I can clean / lube it up a bit. Hope you’re...

Hi Laurence! Thanks for such a quick answer! I’m still trying to figure out the ‘versions’. Sorry like I said pretty new to the Toolcat gang! It’s a 2014 model. It seems to pop off pretty instantly. I will take a closer look for debris and see if I can clean / lube it up a bit. Hope you’re...

Hi There! New / Used Toolcat owner here! And new poster to the group. I did a quick search but can’t seem to find anything related. I’m having an issue where when I sent my heater / AC fan above 3, I blow a fuse. Could this be a sign that the fan motor is just on its way out? Thanks for any...

Hey Laurence! What brand / setup did you end up going with? I’m excited to be picking up my used toolcat in the new year and this is first on my project list! I’ve been looking at the ‘nightrider’ LEDs but haven’t looked around much past that yet. Hope you have a great Christmas!