Search results

Well now the spliter is running and no mess on the floor! The new filter body I put on is working good. It's a good thing I bought a 3/4 " hyd. line because lines are jumping when the spliter is on.

There is pressure on the return line! It blew a hole in the clear line I had that why I bought a hdy. line it has 31 or 3200psi.

I bought a 3/4" hyd. Hose all good now except oil filter I might have to change that because the gasket around it did not stop the fluid and it went on the floor.

Well I changed the line from 1/2" to 3/4" I bought a clear line and put it on and started the spliter and it spit fluid all over! . I use hose clamps on each end I checked before starting the spliter I think I have to buy pex crimp rings and a better line.

A D10

There not enough charging stations around to make buying these. What do you do if you live in a cold State.

OK sounds good. Thanks!

Thanks alot.

I build a log spliter the way I wanted and I have 1 qustion. On the return line now it's a 1/2" I was thinking that's to restricted so I called for a price today on a 3/4" hyd. hose that was to hight so that got me thinking black pipe3/4" would be much cheaper will I have any problems withit ?

K

OK I try to drive it without the wire. That's going to be in a few day when the temp above -.

I took the ends of the chains and put wire though them then though the rim and I drove the chains on stopping a few to fix them.

I put thoes chains on the way they put them on in the video! . The cross link is facing up just like you guys told me to do it so how can they not be right?.

Yeah I watched the videos. If I don't use wire they work ther way off the tire.

Finally got around to putting my tire chains on the tractor,now the qustion is how much do I cut off.these are both tires.

Must be over seas oil

Yeah it's on my tractor so I'll look and see if I have room on the body.

How easy or hard is it to install 2 more hyd ports?.

The twisted wire is to keep the chains they do damage when they come off. I wish I had cams on the chains you turn up and hook into a link. In the Spring I will buy new chains for the tire size.

I never had so much problems putting snow chains on my pick up truck.

OK how do I shorten the chain? What end do I start at.

The size should be on this.

I would have to buy the gauge to check loader tire to find out how much is inside.

I have a problem when I put the chains on the back tires after I put on the tightner. I'm thinking it pulls the chain to tight or the tire needs more air. .

It was the fuse lucky I had one to give him.

No it's not

Asking for a buddy. He bought this used and had nothing but problems!. Yesterday he brought it down to work on it in my plow barn, after he took it off the trailer I guess he shut it down. The problem now is the relay blew out he replaced it with a new one and turned the engine over but it...

I was looking at my mine air valve and it twist. That's strange I never Sean that before.

I have them on but the keeper is pulling the chain to tight.

Thank Lou I pick them and threw them on. I use to to put them like you did I have to start that again.

Thanks blueknife

OK let me see if I have it,the chains on th r ground I'll pick up and put on th r tire from the outside?.... right

The way I have them on the ground is the way I put them on. If you enlarge the pic I had them on with that hook on the outside and the tractor didn't ride smooth but was bumpy.

I didn't tighten them up yet,tomorrow my buddy coming over to do some work on his Bob cat he will give me a hand.

I plowed my food plot and found Dora the exployer doll.

Can someone tell me if these chains look right on the back wheels

Can someone tell me if this is the right way to put chains on the back wheels I'm new at this .

Off road needs to come down.