Search results

Thanks for the info, least I now know where they are. The cab design is a problem for sure. THey should make the lower frame of the front panel removeable somehow. I just may do that myself in the process of working on it this summer!

Not sure where the relays are but I will dig into it when the weather gets better, I now have a way to start it for clearing snow.

Hello so I was able to sucessfully start the tractor with an external clamp on starter switch so Im all set for the winter. As for the side cover it doesnt look like taking the rear mount bolts out will allow taking it off with the cab on it so I think I will be trying to take the gauge pack...

The second pic you shared looks like what I can see from my starter. So I will give that a go, applying power to the small red wire to get it started. Thank you all!

Hi thanks for the help, I actually have one of these switches bought awhile ago but haven't used yet, different brand. But my question is on the starter I just see one LARGE red wire from the battery and one small red wire which I am assuming is the wire from the ignition switch to trigger...

Thanks for the DOC!

Awesome thanks for the help!

Thank you for the info, so I understand better, to remove the right side console (where switch) I need to take out 4 bolts, but where are those four bolts? Unfortunately I am not there now. ANd thanks for idea on gouge cluster. As for a replacement switch I see another thread where the person...

Thanks for the help guys, I will take a look at it. Phil

I see another similar thread for the TC33 but I think mine is different. Last time I used the tractor this weekend for snow cleanup it didn't immediately turn over when I turned the key to engage the starter. I wiggled the key and boom it turned over and started. I thought that would stink...

Hello I bought an older Ford skid steer the seller said it was a 370 model but has 340 painted on the side. It was also re-powered by a Ford 4 cylinder LQ motor as well so thats different. It has a bad wheel bearing so that needs to be fixed and was hoping someone here could help on how to...

I bought a used Mott T38 Flail mower and the engine on it is is rough shape. The carb is nothing I have seen before and its leaking fuel everywhere and when fuel is in the take it floods the carb so the float needle valve if it has one isnt working right. I think its an 8hp engine based on...

So Im building a Quonset hut and need to pour the footings, Ive got all the concrete in the garage dry and need to move it to the site but now the tractor wont start. It intermittently started a few times and now wont at all. It appears to be a safety switch that wont let the starter engage...

So my new to me this summer TC35 would not start last night. I had not run it in a week and the temps are bitterly cold, was -5 last night. I had put a mag mount warmer on it and it did not help. Turned over extremely slow. I could also have gelling of the fuel, I will try warming the...

So I broke my cable on the winch, the cable is old and has a lot of broken strands along its length and even has a couple bad kinks in it. So I want to just replace the cable instead of putting a new end on it. I see I can order a replacement unit from Labonville but I've never done it...

So I need to replace the bucket bushings on my Takeuchi TB015 excavator. I have the parts but need someone that can remove/replace the bushings. I have heard of a person named Lee Dwelley that is either from Litchfield or August that does this type of work but cannot find a contact for him...

So I have a bad sound coming from I think the front end when moving both forward and backward, a clicking/clunking sound. It is more prominent when the FEL is full of gravel that's why I think its the front. Cannot tell what side its coming from so need to get a friend to assist in identifying...

So I am changing my hydro fluid and filters and have a question on capacities. My manual and what Ive read online says it takes either 9.3 or 9.5 gallons for the shared reservoir. I could only fine one fill spot and the manual indicates its for both systems as they share the reservoir. I...

So Ive had this tractor for a couple of months and when I first got it I did a basic once over IE checking all fluids levels and also changed the engine oil/filter, air and fuel filters. I did not do the hydro oil and filters cause I wanted to get the factory stuff and the dealer is out of town...

So to access some of my land I have a short road trek. Returning on it I noticed my front tires were leaving marks on the road. The front tires were well worn when I bought it and was planning on replacing but it appeared something was wrong. When I got back I parked it after driving straight...

So I just got a used NH TC35 tractor, it is much larger than my old one which was a Pasquali 998 tractor. I hooked up my Norse 190 Logging winch to it this weekend and finding a large problem. When the unit is lowered on the ground its connection to the PTO shaft is so much lower than the...

Hi I have an older 015 excavator and the hinge points that hold the bucket on are loose/sloppy. Ive had it for a few years and done several small projects and it has gotten worse. I am looking to do a larger project this summer so think I should correct this first. Where can these parts be...

Just bought a 2005 TC35 and have a few questions, It did not come with an owners manual, I searched the intnernet and there does not appear to be one available to download, can you only buy a hard copy? There are several switches inside the cab I do not know what they do, two on the right...

Hello, I am looking at buying a 2009 Cub Cadet EX450 with an FEL with 585 hours on it. It has a 45 hp diesel engine, 9x9 synchronized shuttle and R4 tires. I was hoping someone here has access to a tractor value site (seam all I found are for pay sites) and can tell me what it is worth...

I am posting this for to document the process and part numbers for others who may run into this issue in the future. The lower bearing at the articulation joint went and with the guidance and assistance from Tom as italiantractors.com I was able to replace the bearings and the tractor is back...

So this probably could happen to any hydraulic brake system but unfortunately its happening to my Pasquali's brakes. Whats happening is after sitting with no use the next time I go to use the tractor there is no brake pedal pressure. A little history, when I got the tractor, 5-7 or so years...

So Ive tried to improve my cable clutch setup and it lasted longer but still broke again. Im getting sick of stranded in the woods with a disabled tractor and having to limp back in low first gear. So Im looking for information on installing a hydraulic clutch. Ive seen them installed in cars...

Hi I purchased a TB015 excavator for some home projects and I want to go through it before starting to use it. Im good on everything except for two things, changing the hydraulic fluid and an issue with the charging system.. THe manual does not specify what fluid to use, I see ISO68 available...

Ive had issues on and off with the clutch on my 988 Pasquali, two problems really. The first is using it sometimes my foot will slip off of it in the most inconvenient times and the second is with breaking clutch cables. The first issue is because the pedal pushes straight down and if your...

I went to get my plow set up on my 988 Pasquali and I discovered I cannot steer it. The steering wheel is frozen still, I just used it last week but it was above freezing so im assuming it is frozen by ice and not rust/corosion. Other hydraulic items work such as 3pt and FEL. So my question is...

Hello I have a DR 3PT chipper that has worked well for me on my 15hp Iseki tractor but I have upgraded to a larger tractor (Pasquali 988) and the PTO speed on it only goes to 750 where as the Iseki has a higher speed. Its too slow for us now, I tried a different chipper (Patu) but it...

Hello my neighbors 12 yr old son bought a 520 Wheel horse to mow lawns and make money but nfortunatly it is not charging the battery. I checked and the voltage at the battery is not increasing when the engine is running. Im thinking it is either the voltage regulator or the coils. Does anyone...

Ok the long story is under a different thread but under the "All Other Brands" forum but looking for a broader audience to help with this. So the full story is here: http://www.tractorbynet.com/forums/all-other-brands/209541-pasquali-988-clutch-issue-4.html But the short of it is, the clutch...

I went to use my 3pt chipper today and struggled with connecting the PTO shaft onto the tractor (Iseki). Its the quick disconnect kind with a push button on the side. I checked the tractor shaft and its fine, I checked the PTO female connector and the pin is moving and I am getting past the...

Hello I have a unique tractor, it is a Pasquali articulated tractor. It is unique but IM sure some things are very similar. Recently the clutch started to not fully disengage fully, my auto mechanic took a look at it and adjusted the clutch cable to tighten it up and it was fine, for awhile...

Looking for help with my Pasquali's clutch. Recently when shifting it would grind the gears, IE I have the clutch depressed, shift into neutral and then trying to go into the next gear it catches and grinds. So I tightened up the clutch cable at the clutch pedal end. Well it will be fine for...

Hi I have a Pasquali tractor with a loader that I want to add a plow to for the winter. I plan on welding mounts inside the bucket to attach the plow to but I don't know how to hook into the hydraulic system to control the plow rams to move the plow angle. Attached is a picture of the current...

Hello I purchased a tractor and it came with a Norse 190 logging winch. Ive never used one but I have talked to people that have and use logging winches on how to use them safely but I have a specific question on this model. Ive been told that after winching the logs to the tractor that you...

Hi I have a leak on one of my hydraulic rams and hoping someone here can help me. The tractor is a Pasquali 988 if that makes any difference. The leak is where a fitting threads into the ram, appears to be leaking at the threads. It appears there is some kind of sealant on the fitting...

Hello all, I just purchased a Pasquali 988 unsure of the year, the prior owner thought it was a 1990 but not sure. Its a deluxe model Im told, it has hydrologic brakes instead of the mechanical kind. I got the tractor with a loader and a logging winch with it for $4500. Seams like a good...

Hello I have a Bolens Iseki G154 tractor with a FEL and I want to get a PTO chipper with a feeder. THe small 8-12hp tow behind chippers dont have a feeder and are useless unless your chipping broomhandles. I found this one at CircleTractors.com PTO Wood Chippers » Buy Wood Chippers: PTO Wood...