Search results

Done ! Thanks

That's them and I never thought of McMaster. Thanks

I own a MAX28XL, 2014, 500 hours. I have done a lot of earth moving, digging, Field work with it and the MAX has performed well. In the last six month the FEL Control Valve started leaking, I finally decide to clean it up and found one of the Banjo Fittings is leaking. I removed the fitting and...

Thanks for the info. I was looking at it and ws wondering if I could replace the seals. I will look around for a supplier.

Thanks for all the input ! A 60" Rake was purchased from Tractor Supply and has more than done the job I've asked of it. Now my FEL Control Valve is leaking and I need either a Rebuild kit of a Rebuilt Unit but I don't know where to go... ALWAYS something ! LoL ! After that a rear mounted...

I like the Grader/Planer, I don’t find it takes too much,in fact with a little adjustments the Tractor / Land Plane more right a long… but the Landscape Rake is a good quick fix.

I should add, although I too have started thinking this tool does more than people think it can. My uses, light raking of fields, some heavier brush, grading my 1/4 mile driveway; the driveway grading was a discovery, I tried it to straighten out some stone I laid out on the driveway and to my...

I purchased the 60" version of the Tractor Supply Landscape Rake. Purchased it on sale plus Military Discount, got it for under $800.00. All I can say about this tool is why didn't I buy one long before this. This tool work great at clearing low brush, leveling the driveway, leveling dirt, and...

I have been using the Land Pride 60" unit. My tractor is approximately 57" wide, allowing just a little overhang. Works great, even though I don't know how to use it correctly. My road never looks better.

I'm thinking on buying a Landscape Rake. Looking at the "Tarter 6 Foot Landscape Rake 200 Series ! Wondering if anyone had a comment, please feel free ! Thanks GOD Bless

I don't know what a grostling iron is. I see a Flattening Hammer !

I am having a problem with my Tach in the Dash Panel of a Mahindra Max28XL. I just read this post and it sounds like there are problems similar to mine in various tractors. I don't want to but it loks like the Dash area of the tractor needs to come apart. Thank you to the OP and all responders.

No I haven't, good suggestion. Thanks

I live in the Temecula Area of SoCal and want to get the MAX28 rebuilt. Wondering if anyone has any suggestions ? Thanks for your time.

My Tach stops working shortly after startup; it runs for approximately 15 to 20 minutes. I haven't taken the Dash apart yet. My question is, is there a quick way to get the dash out so I can check the connections ? Thanks ahead of time.

Thanks for the comment.you are correct, increased power/pressure, increased problems when you are talking small stock tractor. I don't want to increase things too far just lifting what is actually claimed. Thanks again

I own a Mahindra MAX28, 28HP, stated lift... new, 1500 pounds, and I like the size of the tractor. I only have 10 acres so the Max28 is perfect for my uses, field brush cutting (60" Brush hog), 60" grader scraper for the 1/4 mile drive repair, and stone moving. I have a backhoe which has...

I am not sure if I have posted in this on this thread or not BUT, I'm not a fan of the EV Vehicles, not to say I wouldn't buy one to save the environment. My problem is with their methods of advertising and the government play games with the numbers. When the requirements for the EV will really...

Nice tool, looks in good shape. Years back, I was doing some remodeling of dashes in cars and trucks, adding aftermarket gauges, moving things around. I used to take the work to another job I had and at lunch or break time, I would bend up the dash panels and full dash setups. I missed buying...

Why rubber Wheels ? Just thinking out loud... why not metal, no melting ? Coming together nice !

Looking good, waiting to see it finished. Do you have a brake ?

Was wonder where you found your Washer ?

If you haven't fixed the Zerk yet, what is wrong with it ? Just clogged, then a quick slight tap with a small ball peen hammer sometimes works. Also, the "Lock'N Lube Grease Gun Coupler work pretty good !

I'm guessing here... no one like an old post ! I started a new post for me... ! Thks

Seat Warehouse is still up on the Web ! https://seat-warehouse.com/

Hello to all, I posted this on another Thread but thought I would start one myself so I copied over the posting. "My 3-point just stopped working, one minute I was adjusting the mounting to attach the Brush Hog and next it wouldn't lift. Funny ! I looked for any linkage that may have come...

Just came back to this thread and it has been... wait for it... eight years ! Now that should be a statement of quality. Using just the washers for reenforcement, these Bolt-On Hooks and Bolt-On 2x2 Receiver, have been used to move rock, pickup engines, pickup the front of a Jeep and tow it...

I clean up some of the Crud build up, when to use my power washer and it wouldn't start, but that's another story. My Trac Lock does teh same as the OP's, it will move about 3/4" with pressure, it comes back to that point and can be lifted another 1.5 to 2". I didn't see any spring hanging...

A little late but the Max 28 came with all the 3PH hardware included. I take off the lower arms and support hardware when using the BH. The upper arm are up and out of the way but still attached.

rdinatal, I haven't been in here for a while, saw your post and thought I would put something down. I have a 2014 Max28, owned for about 6 years, bought with 43 hours on it. I have never used the diff lock, although I have tried it and it never appeared to work for me, and I have never crawled...

Hello to all, Pls forgive me for resurrecting this older post but I'm having the same problem. My 3-point just stopped working, one minute I was adjusting the mounting to attach the Brush Hog and next it wouldn't lift. Funny ! I looked for any linkage that may have come un-done, looked for...

Does the PTO Fluid sight glass and filler location apply to the 3-Point Hitch ? My 2014 Max28, I had it for 5 years, has been a great tractor, a little less power than I expected but I work around that. I decided to use the 60" Brush Cutter, took off the Grader Land Plane, no problems, Hitch...

When I lived in MA, had an acre, my 48" underbelly mower worked well, anything larger would have caused problems. In CA, 10 acres, 60" Brush Hog, hope the Hogs aren't offended (loL), sometimes I wish I had a larger unit but then again, sometimes I'm glad I can get around a lot of things. An...

Good Morn'n, Taking the Wife for another Covid Test, she is headed for eye lens-replacement surgery on Fri. this week. She has one eye done, the results so far are looking great, hope eye two goes the same way. She deserves a break, so when done she shouldn't need any glasses, not too shabby...

Hello, I have had my Mahindra Max28 for four, maybe five years, and recently oil has been leaking for the FEL Control Lever. I intend to take the Control Unit off the Tractor, remove all the fittings, clean it up and then reseal all the connection points and hope it doesn't leak. What I...

Since my heaviest load should be well under the one thousand pound, I'm thinking the amount of lift lost isn't a problem. As I have said before, my loads will be on the lite side, brush or small quantity of 2x lumber, and I done this once in five + years, I am thinking the 4000 lb. Forks...

Thanks to all for comment. My tractor doesn't have anyway to attaching mechanism for Attachments to the FEL, it is also too low on power. I do Brush Removal once every five years or so, but this last time I dug out everything with the backhoe and will be running the Brush Cutter over the area...

Does EA have Clamp-On Forks. My Tractor is small but I'm thinking something around the 2 to 3K rated lift Forks and approximately 48" working length, 60"+ overall. Thanks

Hello, I am thinking of getting set of the Bolt-On Forks to move, what I consider, a lot of dried Brush ! Do the Bolt-On Forks work well ? Do they fall off ? What do you think of moving Brush with these Forks ? Thanks for your time, Stay Safe,

I've had a few people suggest bringing the ad to the dealership, I think most don't bring it ! I am disgusted with the Dealerships, it is fraud, plain and simple. I went to the Dealerships looked and talked, went home, found an add for an Overland Jeep Gladiator, with a price of $41 K. Went to...

The Tractor is back working thanks to this Site and its members, thank you ! A little cool streak coming through, 45 this AM, tomorrow 30 something overnight... someone told me it will hit the twenties. I have only once seen the twenties out here, didn't last too long, thanks to the sun here...

Hello, I drove my Max, dragged the road with the Grader/Scrapper, all was well. Took my two buckets of trash to end of the 1/4 mile drive, all was well. Shut off the Max, let it set overnight. Went to start the Max the next day and nothing ! Gauges worked, flashes/directionals worked, but...

VX-3 2.5-8x36mm This present will be mounted on the my 20" AR soon. My Avatar can now reflect my Rifle with my Scope. What did you guys get that's interesting ?

Looking at that in about six months; I need to start looking for al of the info. The funny thing is, if we have had a driver's license for a number of years... with a picture on it, why do we need all of the extra paperwork to get a special one ? It isn't like the DMV doesn't have connections to...

So that's where the heart is !?! LoL !

Morning All, Fog is in, 53 headed to high 50's. My Weather Rock says its wet outside couldn't tell me if it was raining, but the weather was suppose to be cloudy. Cool and wet today is my assumption, so I think the Office needs cleaning. I decided not to use the Land Plane on the road any...

Are these Projector type Headlights or Standard Bulb type ? Projectors really don't have high/low beams, the build put out one light level and a Shield is dropped inlace when low beams are wanted to cut the top of the lights pattern off. This applies to both LED and Halogen Projectors. Not...

Good Morning all, Weather is starting off clear and in the high 40's and will be in the mid to high 60s by 11, going to the 70 in the next couple of days, gotta luv SoCal. Coffee is good this AM, thinking of what I need to do today, probable will have another coffee around the 10 o'clock mark...

Good Evening Y'all, Warm today, Warner tomorrow. I added a Vent to the Barn Door, it has louvers in it and they are adjustable so I can close them when the big rains hit, they are also screened ! It passes a nice flow of air when opened full, I have another for tomorrow install, then two more...

USPS, their package delivery in rural areas isn't the best and non-existent in some areas ! I have to drive over a mile to get to my mail box... S****, but I live with it, but when I have a priority mail package, I expect it to be delivered to my house, NOT... I get a card and I have to drive...

jbrumberg, Thanks I am going to need it after this rain !

Good Morning to all, I got the road squared away with the Grader/Scraper (GS), actually fun to use. We've had a light rain since last night and a little heavier down pours for the last 30 minutes; wondering just how much mud we will end up with. I'm worried what I did with the GS will create...

Hello, Just hooked up my Grader/Scraper (G/S) and got a great surprise. It has to be one of the easiest tool to work with, but to work it properly I need some help. I attached the G/S to my little lady, level it, somewhat, to the road, and we took off grading the road... and did a great job...

Hello, I have noticed when reading posting that whenever an "Apostrophe" is used in a word the word does not display correctly. Words like I'm, or Don't, they display as the word and then some sort of non-standard characters, sometime more than one. Just something I noticed but I am asking to...

Everyone to their own ! I feel they look enough a like to call them the same series. lso, the RANGER wasgogin to Beth "F-100" that was coming out and Ford decided to call it the Rangr to appease the fans BUT, and although I haven't driven one, I am so disappointed. I was all set to buy...

I recently found my Tractor Forum Posting on my computer, they have been hiding under the Google Button, WHY... I still am trying to figure that out, "Why won't Google transfer my forum mail"..., not sure why to how ! Try this Fotis and Son Mediterranean Tapenade, it is really good, one of the...

Morn'n to all, Hope all are well. Haven't been around for a short while, too many little project. An interesting thing happened to me via Costco, not a biggy, but just interesting. I had found an item at Costco, that I thought was by far the best thing that Costco has sold in along time...

Hello, I have Apple Computers, a Laptop and a Desk Top, and I am having a problem with the Notifications from this Site going to Junk ! I also use G-Mail as my E-Mail Service, through the Apple Mail Program. I have the TBN-Site's Contact info, "TractorByNet.com", in my contacts, I have a...

Good Morn'n, High 60s to start, not sure where is going but shouldn't be much out of the 70s. Sun is shining, that's a good thing. Got the Electrical done on the Patio Deck, still need to run the water to the Potting Shed for the Wife to play. Got the Hydraulic hose changed out on the Tractor...

IMHO... a secure, solid Stand is needed to effectively use an Anvil ! I have found, based on the weight of the Stand, securing it to the flood isn't always needed. I have seen a few Stands that have removable arms, and a tires, setup so you can move the Stand and then remove the Arms/Tires and...

Added LED Flood Light to the Patio cover, the two light unit work ok the three light unit worked and then didn't, got a replacement three light unit and it doesn't work. Checked the power to the light and there is indications that power is there, taped off the Dusk to Dawn Sensor, nothing...

I've seen the Horizontal Bottle in Buildings, interesting but not a project I want to get into. Mine will be Vertical, the only major problem is the drilling of the bottles. Someone has suggested a diamond bit, I will check that out, thinking a carbide bit might do it too. Don't need a wall in...

I thought it was just me this AM, not getting in the Site, read some other postings and the Site was having problem. I tried all of my Icons, all worked except TractorbyNet.com. Just had an Update on my Operating System, thought it had screwed up. Glad it is back !

LoL, By the time I get through 100 bottles of wine I won't be able to build anything. Thank God I live in an area with a few Wineries, they don't reuse their bottles and it cost to get rid of them so most are willing to give them away. The problem is finding a Winery that has the colors you...

Yes,you can do a lot of things. 1) Full Screens 2) Electrically operated Screens 3) Sun Shades 4) Electrically operated Shades 5) Solid Panels, I don't think they are electrically operated but why not roll ups.

I will be using a lot of Wine Bottles...empty of course, I drill a 5/8 or 3/4 inch hole in the bottoms, stack the bottle maybe on a rebar, and put a lot of the stacked bottle together... that in turn makes a wall. So I decided to call it a "Wine Bottle Wall" ! When I finish I will post a...

I will look for them, thanks !

To continue... I finally took some pictures: 1) Full Frontal. 2) From the walkway side. 3) From the Grille Side. The far corner is where the Wine Bottle Wall will be going (the two Bench Seats)... "IF" I can figure out how to drill a hole in the bottom of the Wine Bottles...

No pictures yet, tomorrow, hopefully. Went to the Dentist, had a heavy discussion about extra fees added to every bill... I call BS ! I am contacting the insurance company to verify this FEE thing ! I will at least find out if they are good charges. The electrical is completed except the...

This IS just me, maybe..., I often think the whole Web is continuously monitored, and depending on who picks up on something like this, they will feed the issue, trying to get someone jacked up enough to build on the statements that were made and take off on their own raising it to another...

Having a cu of coffee, trying to determine what to do for the rest of the day. Got the trench finished that will supply power and water to my Patio/Cover, Fireplace, and Potting Shed, using the little Max28XL TLB. As I have said the ground around here is very hard, and the little girl works her...

The only problem with ETA, to me, is the FREE Shipping in general. Yes, they can stop it, and that would be a shame, but they should have free shipping in the lower 48. I lived in New England and got the Free Shipping, I now have moved to SoCal and am outside of the Free Area; very disappointed...

I just did a quick read through 5 pages of postings... man is this a fast thread. Tires, the new sensors, they are nice but a pita when it come to changing tires and as all have stated 4x's need all four tire as close to the same diameter as possible... all of the time ! Good to hear all is...

Good Morning, 69 degrees as I write at 8 AM going to 99 maybe triple digits. I've been up since 6 AM, had coffee, took the dog for a walk, and looked at the trenching for the Patio Electrics/Water. Got the BH Digging done yesterday, now just need to clean up the trench a little, then run the...

Anyone a Veteran, retire military, try the VA, from what I gather Hearing Aids are free. Something to think about.

What is a "T-Coil" System ? WiFi sort of ! I have Hearing Aids from the VA, they connect to my Phone via Bluetooth... best idea ever, especially when using the "Waze App"; the voice of my English speaking director, comes through the hearing aids... when I use them ! I haven't heard of this...

Going to 90+ out here in SoCal... was in the high 60's last evening... house is cool inside, around 72... hoping it will stay that way most of the day ! Got out early to finish my Electrical/Water Trench for the Patio, Fireplace and Potting Shed. Only 24" deep but the ground is like I said...

My daughter does her ribs the same way but they taste incredible, fall off the bone delicious ! I have yet to buy an Insta Pot... might have to take another look !

Was having the Patio Cover installed today... NOT ! Truck arrived, they started laying out the support beams, asked for approval and I said yes, then I asked about the overhang. I had asked for 12" all the way around, another NOT happening..., the short sides had the right amount but the front...

10,000 Post, just around the corner ! Today I finally get a Patio Cover, thought about building one out of wood but thought twice, it will be a lot of work. After a year of thinking I finally accepted the fact that the patio cover will not be made out of wood and will not be to my original...

Hello to all, I have owned this Max28 for approximately 4 years, 250 hours, it is OK and does what I need, but it is lacking in FEL Lift and an over all power. I am mechanically inclined but getting older, and not up on Tractor, Hydraulic, and Diesel mods and could use a lot of help in...

To respond to the OP question. I used the older designed M16 A1 in Vietnam, other than a slight jam I got one time, not critical, the Weapon did exactly what it was suppose to do, over and over again... my buddy. I came back stateside and never looked at another gun, didn't want reminders ...

Thanks, it is dry and the brown condition of the weeds only stress your statement BUT the Fire Department only want to see it cut nothing else. I will hold off the cutting, as you suggested, I think there is more sense in it than than SoCal Fire Department.

What a concept... I have never seen or tasted, "Cookie Brownies"... WOW ! I will put them on the list, are the Cookies home made too ? Recipe... PLEASE/Thx !

Didn't read all of the postings coming to this point, I think this Thread has to be one go the fastest growing in the Site. Hope all is well with everyone, sorry to hear of the problems going down, I won't state the usual BS but keep well and God Bless. 70 degrees, clear skies this AM in...

Thanks for the support, my dog, she is 14, hearing almost gone except for loud noises, eyes are failing and she had some sort of nerve problem. She get the meds but she still isn't right, just waiting for everything to hit the fan. I have had dogs all my lie but this is the first one that has...

Thx. I use to live in Eastern MA, Gloucester, all of my life up to five or so years ago. Miss the area, lived on the water, but don't miss the snow. God Bless

Haven't posted in Good Morning for a while now but hope all is well with everyone ! To start temp's are going to triple digits for a few days, probably won't be getting out side much, at least not in the barn, should have got a few things done over the last few days... but water over the dam ...

Re: Big Barn痴 Retirement Farm Shop I know when you DON'T have to do anything, doing something isn't a chore. Here is my Morning Coffee View: Mornings are great, best time of the day... to me ! Been hot here for a while but getting a little cooler, should be in the low 90s soon ! Will...

Amen ! God Bless the USA !

Re: Big Barn痴 Retirement Farm Shop I thought so too when I went to pick it up (look at it), the seller roller it out of the corner and told me his dad got it from his work, it sat in a corner and no one used it except for little things. The company was going to throw it out... :confused2...

Nice Swag Blocks... I have been looking for ONE at a decent price point, something that is not out there, same as Anvils. Found an Anvil built a stand, now to start banging hot steel. Do you do any other Blacksmithing ? I trying to get started in a small way for a retirement thing to do...

I walked out to the Tractor this AM, was going to hook up the Grader/Planer and run over the road. As I approached the tractor I noticed I must have forgotten to lower the 3-Point last night, no biggy, I push the lever to lower it, without the engine running and nothing happened. The Brush...

I have searched for Oil/Lubricant and filter alternatives for my Max28 and have come up with almost nothing. Is there a posting that is dealing with all of the Oils and Filters needed on a Mahindra Tractor ? I am at the point where I need to do my next Service, well actually next two - 200 and...

I dont have a better finished picture on my LapTop but can post others if needed. 32' wide x 36' deep. I had the Barn built to represent a "Lobsta Shack" in New England. Also, it had to be a RED Barn ! The large door is 10' x 10' and has enough room inside to put in a 14 x 12 without a...

Morning, I am not a doctor, but I always say you need to listen to your body; don't rush it, sanding overhead is a bad thing when you can't breathe as well as you used to and it puts strain on the heart. Who will do the application of the new sealer, both breathing and pumping blood around the...

Starting out at 55 degrees, foggy, at 5 AM no fog, but headed to the low 80s, fig will burn off early; should be a good day for working outside, at least not in the triple digits. Short Doctor's visit this AM, and get a Hair Cut... all of my hairs cut... seems out here in SoCal, hair and nails...

What condition is the existing ceiling ? The picture isn't clear enough. Is there a reason for the resealing ? Just another thought, is the area above the ceiling vented ? As mentioned already, it will take good prep.

I was wondering, well I ws wondering about two things... ! 1) Is there a way to increase the Horse Power on the Max28 ? 2) Is there a way to increase the Hydraulic Pressure on the Max28 ? If either 1 or 2 can be done, what is the best way to achieve both ! Thx / Ltr Just to calm the beast...

Good Morning to all, I have been sitting here on the front porch for two hours, beautiful morning, 63 now, sunny, no clouds, headed to an expect warm 93 degrees. Watching eight Hot Air Balloons go up and float around for a while, might still be more, they usually last until 9 AM, that when...

Air Tools should always have at a minimum a few drops of oil before using. two or three drops is all that is needed in the air input connector, connect the air and spin it up with a few short burst, then get to work. If your work time is long and strenuous, add some more but less than when you...

Thanks for the top view. I was going to ask why you did the brink but then I saw the end of the pipe. Great idea to know where the pipe is and you ever need to get to the pipe... THERE IT IS ! I will keep the idea in my mind for future use. Thanks

Hello, I am not sure this belongs in the Buying Section of Mahindra Tractors but I am asking anyway. Has anyone changed their seats on a Max28 Tractor, what did you buy ? I searched the Site without success and I have looked around the Web without success, seems there should be an easier way...

Morning All, Got up around 9 AM, going into the 80's today. Had a log day yesterday on the tractor, in the the barn, and just running around. Woke at 6 AM and when the dog didn't want to get up I decide to join her and stay in bed, so I rolled over, that was all she wrote. Dog went out, and...

Good Morning, Got up about 6 MA, foggy, almost felt like a drizzle, cleared off some and suns out, should be in the mod to high 70's. Had a little time on the tractor yesterday use the Brush Cutter, got the big field cut and opened up a little more of the field, going to have it cleared...

Hello, - I read some postings and thought about replying but didn't want to say more than "I like it". My suggestion, "Can we add a "LIKE" Button for each post, so we can just click the button and say "I like it" and leave the rest be. I would think this could reduce storage space for the...

Hello to all, I just posted in the "Another Neighbor Thread"... it got me thinking ! How do others get their neighbors to help maintain the dirt roads they too live on ? I live on a Rural Dirt Road, not maintained by either the Town or the County. Everyone tends to lend a hand one way or...

Good Morning, Cool here in SoCal, should be in the mid to high 70's, maybe 80's but it is in the 60's instead and will be for a couple of days. Weather is really screwed up all over the US, God Bless all in bad weather areas. Need to get the Brush Hog out and go over the areas I cut two weeks...

Driving in Boston is nerve racking at times but nothing like driving the Freeway in SoCal !

Good Morn'n all, Cooler here in SoCal, won't see 70 for at least three or four days, next week before the showers are suppose to stop but it is what it is ! Won't be working on the Tractor today, need to finish up the electrics in the Barn, Outside Receptacles, and three Flood Light Fixtures...

One thing I hate more than a Teacup... a small Coffee Cup, nothing burns me more than ordering a cup of coffee, not thinking about the size of the cup, and wham-bam... one sip and and I need another.

OK looks good, aggressive, but what are the advantages to the PTB. I'm new to attachments and have had my problems with tearing into a banking without using the bachhoe, was wondering if I might gain something by using one of these PTB.

I'm with you, a Horse *** is still one no matter how much you try to make it smell better. That is why I thought most people would laugh at the idea BUT I do know it work in the past and hoping for the best for the future, SoCal... right now, doesn't have a big bug problem, things are out there...

Thk for the welcome...

I thought when I posted about the Skin So Soft that it would get a laugh, I didn't think anyone ever used it for the bug spray purpose. I am ordering a bottle of the Skin So Soft from Amazon, (Thanks for the Link Rick), should be interesting to see if it still works as well as it used to !

Who knew... they turned it into a Bug Repellant... AND with SPF 30, none the less ! I wonder if it works as well as it used to and hopefully doesn't smell the same ! Ltr

As they say, Everyone is different ! David, I haven't read the back postings to this thread, what are you threading pipe for ? Ltr

Morning form SoCal, Cooler than usual today going to the mid to upper 60's, been cooler than usual for a while now and will be all this week but at least it is weather ! Funny hw the human body can change its likings, i.e. MA weather vs CA weather, big difference and I thought I liked the...

Good Morning from SoCal, Going to mid to high 70's today, with the always present breeze... should be a good day. Done with the coffee, just one cup, need to LUBE up the new Brush Cutter. Then over to Harbor Freight, need to look at their Post Hole Digger. Any opinions on a Hand Held type...

I like them and would like to order all of my Attachments from them BUT their delivery system, if you are out of the circles you are screwed. If they had the same delivery pricing for all the US, I would have all EA Attachments.

Hello, It has been a while, the SoCal remodel on the house is completed and the yard work is more of a big job than thought, not just Landscaping but the maintaining of the Fields as a Fire Protection. (A problem in a Flash Fire Area - Fire Department Mandated). I purchased a Brush Hog from...

Mahindra Max 28... Not Starting !Hello to all the people reading my post ! It has been a while but the SoCal remodel took far longer than expected and in a way is still on-going, barn wiring, Forge Setup, and the new compressor system ! My Max 28 took a fit and decided not to start. It has been...

Hello to all the people reading my post ! It has been a while but the SoCal remodel took far longer than expected and in a way is still on-going, barn wiring, Forge Setup, and the new compressor system ! My Max 28 took a fit and decided not to start. It has been giving me trouble starting for...

Need Battery Cover for my Mitutoyo Calpers. Appears Mitutoyo has decided to forget about the older Cali. Model: CD8 CD6 will work but the Mfg Number is important. Mfg Number: 500-322 An old worn out Calipers, 500-322, will work too. Thanks for reading !

Hello to all, lt has been a little while since I have posted something ! I purchased a Max28 a while back and have been a little disappointed with a few things: 1) the FEL Valve, operates very abruptly, not smooth. 2) the BH digging power, not as powerful as I expected, my SC2450 dug better. 3)...

The post above is funny in that I just logged on to update my Tool Box review. I purchased the maga 72" chest, 72 in. 18 Drawer Glossy Red Industrial Roller Cabinet Had it for a short while but it is one very rugged tool chest, draws slide very easily, and the chest holds a lot of tools. Rolls...

Stock Picture of GS1560 ! None of my own until it arrives… shouldn’t be too long.

Anyone hear of ABI Attachments. $1450 for 60" unit.

deleted by OP... !

Thanks for that. I am new to SoCal and have no idea where Bloomgton and Fontana is or the distance volved. Also, no truck nig enough to carry both of these items so there will be additional shipping involved, not sure how much. Pricing out other brands, you find their prices, including shipping...

Thks is for the reply. My zip is 92592, SoCal is a good distance. I did notice that when you had attachments on E-Bay, it was free shipping; maybe you can do a "Free Ship" special for this site. Thinking on attachments, LPGS-60", a 60 to 72" HD Roller (not sure if you even have one), and a Post...

Was wondering if you have any specials for Site Members ? Maybe free shipping anywhere in US or a discount on product ?

Was wondering if you have any specials for Site Members ? Maybe free shipping anywhere in US or a discount on product ?

What a joke... None to be found used for a decent price, everyone wants the latest pricing, sort of like Anvils. Looks like I will have to buy new just to get my money's worth. Even trying to find a dealer is a problem. i have whittled it down to either a Befco or LandPride, both look good on...

The lower link points do not have supporting connections to the rearward cross bar, that is all I am saying. I would think thick enough steel would work but I like the idea of the extra bracing. Your picture shows that little piece of steel for the upper connection but the lower connections...

Tractor: MAX 28 HST Sometimes when pushing in to a pile on road base (crushed cement and recycled black top), I find the MAX seems to run out of steam. Is there a way to increase the HP ? How much increase in HP is worth it ? Will I overload the pumps ? Thanks a head of time, just thinking...

I was thinking the full framed hitch, similar to the Pats but the full frame unit hooks up the top and the bottom pins and you don't have to bend over to release the lower pins when changing attachments. If you use hydraulics on the 3PH they will stay attached to the full frame set up. To me...

Good people are responding to this. Here is mine: As all can see it isn't ones persons problem and again I for one am not against ads, just not pop ups that override my computer, we don't know what else they are doing. Added: Here is a other one I just got, not a car ad as usual.

I'm looking at the Land Pride GS1560. Looks rugged enough for my little tractor. Looked at others but they didn't look as rugged. Local shop has them for around $1200 delivered.

Bolt-On Hooks Advertises here. Great products, easy to mount. Ken is easy to talk to.

A few of you and me, are mentioning about adding auxiliary fuse panels on their tractors; they will need to be sealed or classified as Waterproof. I saw this ad and have used this company before for a large wire purchase so I though I would post it up. Their prices aren't the lowest but they...

This isn't the building but close. One 10x10 door centered in the high peaked section and One 8x8 door in the lower roofed section but other wise the same thing... 32' wide x 36' deep. Should be here in two to three weeks.

I now am getting ads on the bottom of the screen that I can't get rid of, why, is it just money ? How do I get rid of the ads ? thks

It has been asked before and yes I searched and read through the first two pages before giving in and just posting. I am thinking about buying a Land Leveler/Grader Attachment. My tractor HST 4x4 and is 54" wide, do I get the closest to the width, 60", or can the tractor and its 28 hp pull a...

Ford didn't listen when the Retro Bronco Prototype was viewed a number of years back, why now. I thought it was good then and they even posted as starting price of $27K. It was wishful thinking on my part, I really wanted one and was even considering the Raptor version, they had me hard man...

In havent found a lot of information for adding an OEM Hyd Top Link to my Max 28. Anyone have any input on a unit for the Max 28, OEM or aftermarket ? Where would it connect ? thks

Painless Wiring has a unit called the Circuit Boss, comes in two sizes, Both panels are relay controlled, one has through circuits. units are well build, a little pricey but are easy to install in there small package. Blue Seas has a great line of waterproof circuit panels that can be...

Looks like it is all there. . There are four brackets mounted on the tractor that will need to be removed and added to the kit. No Canopy with the enclosure. Let me know, make an offer, shipping is your dime and remember if packaging if required that too is your cost. I am located in...

Wow, R we beating this one to death ! The idea of using a relay is to keep the higher current flow outside of the cab or from under the dash panel, in turn reducing any chance of causing a fire. I know you guys are up on all of the LED Lighting and the need or not for a relay but if your happy...

First, Ken's products are very well built, good quality in material and welding and has a good looking coating on the parts. I ordered three bolt on hooks, two for the FEL and one for the BH, also got his 2x2 Receiver that will be mounted to the FEL and used for any number of devices made for...

I mounted the "Bolt-On Hooks" Hooks over the weekend, one at each pivot point on the FEL. Also added in the "Bolt-On Hooks" 2x2Receiver, centered on the FEL. I am having some trouble loading picture, the latest iPad update (8.x) really screwed up my iPad, I can't select anything, getting...

I log in... and read a thread or two. I decide a want to post a comment, start to and then I need to use the spell check or go get an address for another location I need to ref and when I get back to the sire I have to log in again... what gives ? I lose all of the original posting I started...

Mahindra BHS Thumb is on. Hoping this tool will help in the rock moving and wall construction.

Shift 4200, Not sure what the top fits or even the manufacturer. As soon as I get it I will check it out. From the pictures it looks never used. Added Note: Dealer said they go for around $690 but this one is slightly faded. Check what it fits and make me an offer, plus shipping ?

Bit the bullet and purchased the Max28XL, HST, TLB... I was looking at, 43 hours and a 5' Box Blade. Found a 2013 Max 28 with low hours and a good price. Came with the Sun Shade too and a soft enclosure which I probably will sell. The BH has not been used and the FEL has a few slight...

Hello, I am getting ready to purchase a used (43hrs) Max 28XL TLB. Dealer is too far for me operate the unit and I do not have any other dealers close to me. What I need to know is what lever does what ? I am use to,the left lever controlling the first part of the boom, in out left right, and...

Thanks to this thread and the Weld-On Hooks Thread I have decided to use the double mounting Setup from Kennyd's stuff. (see attached) I think a 2x2 receiver hitch in the middle will round out any hook up I will come across. On my existing tractor I am using two bolt-on shackle mounts on the...

This guy make some good looking stuff. Ken's Bolt On Grab Hooks, boltonhooks.com The double attaching points, chain on top and shackle mount on the bottom or inside the bucket, this is a great idea. He also carries chain accessories and other needed things.

A local dealer has a leftover 2012, CK35, this is an e-mailed offer to me so I am not sure what equipment is on it yet. Was wondering what people thought of the CK35 ? Does it have any problems ? I have 10 acres and it will be used for landscaping, road work using both the FEL and backhoe along...

I have a SC2450 TLB with less than 200 hours. Runs great, so far so good. Purchased Aug of 2010. Front bucket blade worn, still usable but I have a replacement. All else OEM except for one FEL Hose, wife broke on first time trying to dump a load in a dumpster, lesson learned. Tire tread good...

For the doors, use ship lapped rough pine. Cut boards the height needed, enough for the width of both doors. Lay out enough boards for each door, clamp tight, one door at a time. Cut boards to go across the top and bottom of the doors, both sides of each door. Cut boards to go between the top...

The new house in SoCal, sitting on 10.5 aches: rock and weeds but it will come around and be home. The view from the front door, soon to be a Farmers porch all the way around.: The side view toward backyard, the closest neighbor and that is only their out building: The other side...

Looking for someone that has purchased the new CCY SB52, 52" Snowblower in the New England Area. AND if they find it is not what they THOUGHT they wanted or it is getting the use they thought it would and they want to sell it let me know. Through E-Mail is usually the fastest way...

I know you guys are in to more realistic toys but this was e-mailed to me and I thought you guys, especially in New England, could use a laugh. E-Mail: I'm tired of shoveling snow. I'm thinking of getting one of these babies!! 454 cubic inch big block Chevrolet V8 produces 412 horsepower...

Ok guys need suggestions on what to buy for a trailer to move a small tractor ? 3K Tractor + a couple of Attachments. Need brake Light weight - aluminum ??? Narrow if possible Thks

Not to offend anyone but this is a write up I did for another site. If you find a problem please let me know, although I have proof read it I always seem to miss something. Here it is: Auxiliary Lighting Wiring By Scrambler82 Any questions: nnf000@gmail.com This can be applied to any aux...

I noticed a few people asking about hooking up backup and work lights so this is a simple schematic to help. Do not use the 12V Outlet to power Backup or Work Lights for extended periods of time, it was not designed for long term use or for higher amperage draws. Things to remember: Always use...

Xmas in Aug, nice ! I am still trying to determine if the PHD 7200 Jr will fit the CCYanmar Sc2450 ? Then maybe I can get a big package Enjoy

Using a Posthole Digger on a CCYanmar Sc2450 ? Has anyone used one of the 7200 JR Posthole diggers on there SCUT ? I own a CCYanmar-Sc2450 and thinking about getting one... but also thinking (smoke) if the tractor will lift the Attachment high enough for travel and removal from the hole. I...

I just purchased a rand new Sc2450 last week, nice little tractor working out great so far but I have two basic problems. 1) The backhoe tends to creep down no matter what, standing still or moving I always have to reach back and pull it up; maybe three or four inches in a short time. If it...

Just watched a Vid on EA.com Site about Box Blade use, seems like a handy tool and I understand the use of the Top Link for the BB now ! I feel the video sold me on buying a Box Blade and I will contact EA.com soon. Thanks for the info/Vid

The quote of $17,950 is for a Sc2450 TLB w/3 pt Hitch Hookup, 12" BH Bucket, 48" Box Blade and Grader Blade ? Asking for a Block Heater and wheel weight, either loaded tires (which are small) or wheel weights. I am sure the loaded tires are less expensive than the weights so that is what he...

Hello, I am in the process of buying a JD 2320, test drove it, like it and working on pricing and attachments costs. I was very surprised by the noise of the Tractor when it started to go forward. Do all of the Hydrostatic Drives sound like a squealing pack of pigs. In the test drive all the...